I follow you from a long time ago and everytime you upload a video and i see it, i learn something i didn’t know. Keep up the good work! You’re doing great and i’m sure you’ll get somewhere
where have you been all my life! I just recently graduated in Spatial development and only now after 5 years have I found your channel. You could have saved me so much time and my drawings and presentations would have looked so much better. Damn I hate my school.
I'm a Chinese student preparing the portfolio, it's really hard for me to use VPN to get there, but it is worthwhile to see videos like yours, thx a lot.
@@LearnUpstairs yees would be very great, in my opinion it would make your tutorials more helpful for a big number of people - > especially good graphic tutorials for urban planners and landscape architects are not so popular so you might be one of the first
Eu amo os seus tutoriais. Era exatamente o que eu estava procurando a uns dias atrás sobre como montar pranchas de TCC no Illustrator. É um programa tão simples, que chega a me chocar. Juro. Eu prefiro o Illustrator, porque ele faz mais o meu estilo de trabalho. Tenta fazer um vídeo sobre os básicos do Illustrator por favor.
@@LearnUpstairs Adorei a ideia, eu estou encantada com você ! Eu amo essa parte gráfica e infelizmente não pude me aprofundar durante a faculdade, mas é algo estarei correndo atrás agora que estou terminando !!
I’m so grateful for these videos Oliver! You are such a straight to the point teacher 👍🏽👍🏽👍🏽 please consider creating videos or courses for sketch up modeling
Congrats for the 80k subs, you deserve it! Your channel is one of the bests about architectural illustrations on TH-cam by far! Do you think that’s possible for you to do an example of parasitic architecture? It is getting very famous around the world, and I would love to see your take on it. Thank you
i want to learn illustrator but since i have my hand set over Photoshop working on it gets really annoying. If you can, make a basics of illustrator video please
Me too! And I think the best is to use both at the same time. Start in Illustrator and then place the .Ai file linked in Photoshop. Then you can work simultaneously in both 😁
Hey! Wonderful tutorial, really love your work. It would awesome if you could do a video or a series of videos about Illustrator and all an architecture student/architect should know about Illustrator and how to use it. It would be awesome if we could be shown a lot more about Illustrator and working with it, within the bounds of architectural presentation. Thank you! Big up!
i like the illustrator tutorials better, only because i'm not really familiar with photoshop because i don't have it. i find i personally use your illustrator vids more. so, i'd say make both.
Imo there is a lot of channels with mostly photoshop architecture tutorials, your illustrator makes your channel unique so i would advise to stick to Ai more but mby with other topics techniques and styles ;)
Mixed use is always better for variety and I use almost all adobe programmes. looking to move to blender for 3D so hope to see content on that as well. New follower here and like your videos thanks for sharing!
Hi Johny! Photoshop works with pixels, so it is best to use textures, soft shadows, gradients, adjustment layers, ... And Illustrstor is a vector based software, so it is best to use when you are working with lines, different stroke widths, and so on Also anything done in illustrator can be scale infinitely. You can print in any size and will remain high quality. Photshop you can't do that for example. There are lots of other big differences, but I think this sums it up
I tried exporting from Rhino as a PDF and it did not open correctly. You had fills and lines when exporting but I just had lines and it did not look right. Do you know how to export from rhino?
Hi Ksenija! I use the pathfinder tab to do these shape modifications. Make sure to have the icon above the circle, then select both and chose Subtract from the pathfinder tab. That should work correctly! Oh and make sure to have the icon as a vector shape and not image. When downloading the icon from the website, make sure that it is a .svg file and not an image file (like jpg or png), otherwise, it won't work. Cheers
Oi Murilo! Vc tem que arrastar ele como um arquivo novo. Não pode ser em um existente. E depois "explodir" ele usando o ungroup e o "release compound path". Ou usar o atalho A que é a seta de seleção individual
Hi Sara! It can be done in many softwares, even in photoshop. But I did using Adobe Premiere, which is the video editing software I use to edit these videos. I key framed the hand with the block moving, then swapped the hand for one without the block, and moved it away. Very simple for a video edit. I just wanted to create a fun intro
Don't just show Photoshop because it's what most of us (including myself) are most familiar with. I learn more from seeing you using software that I don't use as often, and that makes me drop Shop for illustrator and such for some particular tasks, because it's more efficient. If I would not have seen your tut (or someone else's) on how to illustrator, I would've stuck to my inefficient Photoshop routine on such tasks, losing precious time.
Hi, I follow your step by step but somehow the icon creating process didn't go well since I couldn't compound them together. I did download the icon from Flaticon with PNG option, is that right?
Thank you so much for your efforts and tutorials! i have a quick question, why did you delete the original strokes and then re-add it later? why not just keep them?
@@LearnUpstairs could you tell me how to do this? I've looked up video's and haven't found a solution. BTW your graphics are amazing, keep up the work!
Hi Diego, it's simpler than you think. I just print screen the color palette from the website. Then create one square and duplicate it how many times I need. Then using the eye dropper I pick then color from the screen shot.
Olá, descobri seu canal recentemente e estou fazendo uns testes de estudo. Na parte que você coloca a linha grossa em volta do grupo, como vc tirou o preenchimento depois de adicionar todas as formas no pathfinder? Estou amando seu trabalho e já sinto que vai me ajudar demais a partir de agora na faculdade!
Oi Rafa, seja bem-vinda ao canal! Assim como em qualquer shape você pode tirar ou colocar stroke/fill usando os símbolos em baixo dos quadrados das cores. É um quadradinho pequeno branco, com uma linha em diagonal dentro vermelha. Clica nele pra tirar o fill. Fica difícil explicar por texto, mas qualquer coisa vc consegue achar no google procurando por "how to remove fill in Adobe Illustrator" Espero que ajude! 😁
Hi sushil tank! The intro was made using Adobe Premiere and Adobe After Effects. You can learn more about these softwares, specially about motion graphics. Which will help you achieve this simple effect.
Hi, first of thanks for your great videos they are sooo helpful, but i have a problem, I cant get edges and lines from sketchup when I export to pdf, and when i open in Ai it comes just a image and there is no lines, how can i fix it?
Hi Oliver, I cant drag and drop the pdf, my Photoshop doesnt allows drop it and I dunno whats going on. I’m paused on your video in 2:50, I hope you help me please!
I'm not really a Revit user, sorry. I know it works in Archicad and should work in Revit. But theoretically, if you have your view in black and white and export as PDF, it has to work
That looks awesome thank you for the tutorial. One question, which software do you use for screen capture and for adding the arrows and call out rectangles?
thank you for your work...i am one of your new subscribers from few days ago. Till now I've been using photoshop for my projects but now it seems illustrator could be a quite handy too. I am up for both software. Also I am recently interested in small scale animating to explain the concept or diagram. like the part you did in the beginning of the video putting the box in place by hand. can you teach us how to do that?
Hi Vaidas! Make sure to set the sketchup style to have fill as well. If you've got the line style applied it will result in a lines only pdf document. I hope this works for you 😁
Hi Nick! The shadow was done in photoshop. I just duplicated the hand and painted fully black. Then distort it and lastly reduced the opacity. I didn't show because I wasn't part of the illustrator workflow
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Please do more videos using illustrator. I learned a bunch of things watching this video and you really show how useful illustrator is 👍
Alright Camila! I really appreciate your feedback 😁 I'll work more on that
eres el mejor profesor de diseño!
You are the best design tutor!
你是设计的最好的老师
ты лучший учитель дизайна!
Thank you! I really appreciate it 🙏
I follow you from a long time ago and everytime you upload a video and i see it, i learn something i didn’t know.
Keep up the good work! You’re doing great and i’m sure you’ll get somewhere
I'm happy to know that! Thanks for your feedback Agüita! 🙌
I like videos like this with all the work flow, from modelling software to graphic and publishing ones. Thank you for this video!
I am an architecture student and I really appreciate your videos, these are very inspiring and useful! Thank you
I'm glad I could help Sergio! Thanks for the feedback 😁
where have you been all my life! I just recently graduated in Spatial development and only now after 5 years have I found your channel. You could have saved me so much time and my drawings and presentations would have looked so much better. Damn I hate my school.
Yes please, more illustrator! I learned so much just from this video, even if a bit fast.
Was Searching for one of a kind video. OU finally did it !
🙌🙌🙌
Hey OU Graphics,
congrats! 80K.
I always appreciate about your video tutorials.
It helps a lot.
Thanx
Thanks Bunz! 🙌
congratulations bro for the 80k you deserve 80m the best graphic channel in TH-cam by far 👍👍👍
🙌🙌 Thanks!! I really appreciate it 😁
This is one of the most helpful videos i have found for illustrator till now.....thank you so much and keep up the good work
I'm a Chinese student preparing the portfolio, it's really hard for me to use VPN to get there, but it is worthwhile to see videos like yours, thx a lot.
Thank you so much for your effort and for being here. I hope it pays off 👍
Good luck on your portfolio!
More illustrator and please more stuff for landscape / urban planners. Awesome videos man
Great point! I should definently bring more of what you said. Thanks Jan!
@@LearnUpstairs yees would be very great, in my opinion it would make your tutorials more helpful for a big number of people - > especially good graphic tutorials for urban planners and landscape architects are not so popular so you might be one of the first
photoshop and illustrator are very useful keep making videos of both please !!
Alright Sergio! 😁
That was awesome, I particularly like Illustrator tips much more than photo shop.
Thanks for the feedback Henrique!
Eu amo os seus tutoriais. Era exatamente o que eu estava procurando a uns dias atrás sobre como montar pranchas de TCC no Illustrator. É um programa tão simples, que chega a me chocar. Juro. Eu prefiro o Illustrator, porque ele faz mais o meu estilo de trabalho. Tenta fazer um vídeo sobre os básicos do Illustrator por favor.
Illustrator é muito bom mesmo! Eu gosto muito também. Pode deixar, vou adicionar na lista de tutoriais. Valeu Douglas!
@@LearnUpstairs Adorei a ideia, eu estou encantada com você ! Eu amo essa parte gráfica e infelizmente não pude me aprofundar durante a faculdade, mas é algo estarei correndo atrás agora que estou terminando !!
Amazing work man! , thanks much. I remembered a lot of tips after two years of not using Illustrator. Awesome work :)
Congrats! Your hard work pays off! Keep up the great work!
Thanks for the feedback Vlad! I really appreciate it
I’m so grateful for these videos Oliver! You are such a straight to the point teacher 👍🏽👍🏽👍🏽 please consider creating videos or courses for sketch up modeling
Congrats for the 80k subs, you deserve it!
Your channel is one of the bests about architectural illustrations on TH-cam by far!
Do you think that’s possible for you to do an example of parasitic architecture? It is getting very famous around the world, and I would love to see your take on it.
Thank you
Thank you so much Ernani! It means a lot 😁
Loved your suggestions! It does look like a challenge, but I'll add to future videos
Instead of using the select same function, you can use the magic wand tool (shortcut is Y)! It’s a lot faster that way
I think I learnt more from your channel than in my college , but will be lot of help if you do a video on zoning !!
Thank you so much, this videos are most helpful content to work on architectural drawings. Easy and important
I'm glad I could help salome! Thanks for the feedback 😁
While i use more Ps, i think you should do your videos based on the best workflow you've found since you are the one teaching us stuff. Great vid btw
Alright, I'll take that into account! Thanks Valkiria
Great! :) I was planning on learning this program for a long time...
Amo mt o ps pq foi o que aprendi. Usar o illustrator me dá panico kkk pq já estou habituada com os atalhos do ps kkk mt obg pelos vídeos! Ajudam mt!
Valeu pelo feedback Fernanda! Quem sabe faço um vídeo mais introdutório do illustrator 😁
i want to learn illustrator but since i have my hand set over Photoshop working on it gets really annoying.
If you can, make a basics of illustrator video please
Alright! Will add that to the list, great suggestions Priyansh
Love having a choice of tools to work with!
Me too! And I think the best is to use both at the same time. Start in Illustrator and then place the .Ai file linked in Photoshop. Then you can work simultaneously in both 😁
Hey! Wonderful tutorial, really love your work. It would awesome if you could do a video or a series of videos about Illustrator and all an architecture student/architect should know about Illustrator and how to use it. It would be awesome if we could be shown a lot more about Illustrator and working with it, within the bounds of architectural presentation. Thank you! Big up!
i like the illustrator tutorials better, only because i'm not really familiar with photoshop because i don't have it. i find i personally use your illustrator vids more. so, i'd say make both.
U RE THE BEST! THANK U FOR HELPING US
I appreciate your comment Aznar! 🙏 thanks!
Imo there is a lot of channels with mostly photoshop architecture tutorials, your illustrator makes your channel unique so i would advise to stick to Ai more but mby with other topics techniques and styles ;)
Good to know that Merry! Thanks 😁 I'll work on that
@@LearnUpstairs Counting on it ^^ ;) Big fan of the channel
amei seu canal! Já assisti vários vídeos e estão sendo muito úteis! Parabéns!
Valeu Manoela! 🙌
bro this is so cool and so helpful
Please more Illustrator videos Upstairs!
A lot of both but I would really enjoy learning more about Adobe Illustrator
Awesome! Alright then 😁
I would suggest more of both photoshop & illustrator .
Thanks for your suggestion Fazle!
This was extremely helpful! Thanks!!! :)
this is awesome and well-explained thank u so much!!!!
Vídeo sensacional, simples, direto e muito bem explicado. Parabéns!
Muito obrigado pelo feedback Guilherme! 😁
This helped me alot! Thank you!
You are doing a great job brodaaa
Awesome, you earned a follower!
Welcome aboard! 😀
I'm a newbie but I prefer Illustrator since it keeps the line quality while Ps seems like a quick solution or good for final touchup.
Thank you sir, this really helps my work :)
I'm glad I could help Bezaliel! Thanks for the feedback 😁
Thanks! Can u do a tutorial on how u made that arm move?
It was a basic move from Motion Graphics using Adobe After Effects. If you google motion graphics basics in AE you'll find it easily
The waht???
I adore photoshop since I'm 12 but this video just made me reconsider going to illustrator
Yes illustrator videos
Very cool video thank you but can you tell us how did you animated the hand at the start
Hi Ash! Thanks!
The hand was done in Adobe Premiere, which is the software I use to edit these videos.
Photoshoot and Illustrator equally... both programs!
Alright! 🙌😁
Mixed use is always better for variety and I use almost all adobe programmes. looking to move to blender for 3D so hope to see content on that as well. New follower here and like your videos thanks for sharing!
More of Illustrator Videos
Nice video but i am still waiting for the ferneyra style interior in illustrator
Yep, I know. But I'm trying to diversify the content before repeating a video. Thanks for the feedback Fosey at!
How do you choose whether using Photoshop or Illustrator? What are the advantages and differences between them?
Hi Johny!
Photoshop works with pixels, so it is best to use textures, soft shadows, gradients, adjustment layers, ...
And Illustrstor is a vector based software, so it is best to use when you are working with lines, different stroke widths, and so on
Also anything done in illustrator can be scale infinitely. You can print in any size and will remain high quality. Photshop you can't do that for example.
There are lots of other big differences, but I think this sums it up
I tried exporting from Rhino as a PDF and it did not open correctly. You had fills and lines when exporting but I just had lines and it did not look right. Do you know how to export from rhino?
Hi Nick! I never used Rhino to be honest. But you might want to try different view modes (view styles) to see which one exports better
Caramba, que tutorial! Parabéns, Oliver
Obrigado, Fabio!
Keep working bro, good job!
Thank you Gonzalo!
How did you subtract icon from the circular I can not manage it. Do I need to do something with icon firstly?
Hi Ksenija!
I use the pathfinder tab to do these shape modifications.
Make sure to have the icon above the circle, then select both and chose Subtract from the pathfinder tab. That should work correctly!
Oh and make sure to have the icon as a vector shape and not image. When downloading the icon from the website, make sure that it is a .svg file and not an image file (like jpg or png), otherwise, it won't work.
Cheers
@@LearnUpstairs Thank you!
Please do more videos using illustrator.
Alright, Dominike! Thanks for the feedback 😁
Arrasto o PDF para o Illustrator porém o mesmo não vem com preenchimento e linhas separadas
Oi Murilo! Vc tem que arrastar ele como um arquivo novo. Não pode ser em um existente.
E depois "explodir" ele usando o ungroup e o "release compound path". Ou usar o atalho A que é a seta de seleção individual
can you please explain how did you move the hand and place the block in to its position.
Hi Sara! It can be done in many softwares, even in photoshop.
But I did using Adobe Premiere, which is the video editing software I use to edit these videos.
I key framed the hand with the block moving, then swapped the hand for one without the block, and moved it away. Very simple for a video edit. I just wanted to create a fun intro
@@LearnUpstairs Thanks!
I love your videos!
Thank you! ❤
Don't just show Photoshop because it's what most of us (including myself) are most familiar with. I learn more from seeing you using software that I don't use as often, and that makes me drop Shop for illustrator and such for some particular tasks, because it's more efficient. If I would not have seen your tut (or someone else's) on how to illustrator, I would've stuck to my inefficient Photoshop routine on such tasks, losing precious time.
Alright Sulnim! Got your point. I'll try to bring the best workflow for both softwares. Thanks for the feedback 😁
photoshop please you have brilliant ideas!
I'd like videos on illustrator and photoshop.
Ok 😁😁👍
🔥🔥🔥 saludos de México 🇲🇽
buen video
Hi, I follow your step by step but somehow the icon creating process didn't go well since I couldn't compound them together. I did download the icon from Flaticon with PNG option, is that right?
Can i use revit generic model instead of sketch up for this?
Try Affinity Designer and Photo!
Thank you so much for your efforts and tutorials! i have a quick question, why did you delete the original strokes and then re-add it later? why not just keep them?
Wow!!! Excellent thank you🥰🥰
Thanks for the feedback! 🥰
Can you export 3d views in revit like this to be able to manipulate the lines?
Yes for sure! Just make sure to export as pdf
@@LearnUpstairs could you tell me how to do this? I've looked up video's and haven't found a solution. BTW your graphics are amazing, keep up the work!
Cool tutorial, thank you very much ❤
I'm glad you liked! Thanks for the feedback 😁
Congrats!
Thanks Hylke!
Hello! How do you put your color palette in the little boxes and beside the project?
Hi Diego, it's simpler than you think. I just print screen the color palette from the website. Then create one square and duplicate it how many times I need. Then using the eye dropper I pick then color from the screen shot.
Você é o cara!!!
Olá, descobri seu canal recentemente e estou fazendo uns testes de estudo. Na parte que você coloca a linha grossa em volta do grupo, como vc tirou o preenchimento depois de adicionar todas as formas no pathfinder?
Estou amando seu trabalho e já sinto que vai me ajudar demais a partir de agora na faculdade!
Oi Rafa, seja bem-vinda ao canal!
Assim como em qualquer shape você pode tirar ou colocar stroke/fill usando os símbolos em baixo dos quadrados das cores.
É um quadradinho pequeno branco, com uma linha em diagonal dentro vermelha. Clica nele pra tirar o fill.
Fica difícil explicar por texto, mas qualquer coisa vc consegue achar no google procurando por "how to remove fill in Adobe Illustrator"
Espero que ajude! 😁
Can you do videos for final project presentation
I'll add that to the list! Thanks for the suggestion M.!
can you make video on how do you make video on this website i mean like starting animation
Hi sushil tank! The intro was made using Adobe Premiere and Adobe After Effects.
You can learn more about these softwares, specially about motion graphics. Which will help you achieve this simple effect.
amazing! thank you!
love thiss omg thankssss
Hi, first of thanks for your great videos they are sooo helpful, but i have a problem, I cant get edges and lines from sketchup when I export to pdf, and when i open in Ai it comes just a image and there is no lines, how can i fix it?
Hi Oliver, I cant drag and drop the pdf, my Photoshop doesnt allows drop it and I dunno whats going on. I’m paused on your video in 2:50, I hope you help me please!
is there a tool in illustrator that adds shadow to an object?
btw look your work
Yes there is, just like Ignace pointed out! But it is a drop shadow and not like a 3d shadow.
Amazing one
Thanks Suchet! 👍
Brilliant
Nice video but I gotta ask does the pdf thing only work with sketchup?
I think it might work with any 3d software. Which one do you use?
OU Graphics ok I use Revit, does it work the same or is there something I have to do when exporting the file?
I'm not really a Revit user, sorry. I know it works in Archicad and should work in Revit. But theoretically, if you have your view in black and white and export as PDF, it has to work
OU Graphics ok then thanks a lot I’ll go try it out then👌🏾
Very nice very helpful
That looks awesome thank you for the tutorial. One question, which software do you use for screen capture and for adding the arrows and call out rectangles?
Hi Dave! I use OSB for screen recording and the arrows and call outs are added in Adobe Premiere while I'm editing the video. Thanks for the feedback!
more Illustrator!
thank you for your work...i am one of your new subscribers from few days ago. Till now I've been using photoshop for my projects but now it seems illustrator could be a quite handy too. I am up for both software. Also I am recently interested in small scale animating to explain the concept or diagram. like the part you did in the beginning of the video putting the box in place by hand. can you teach us how to do that?
very nice buddy
Thanks Mohd! 👍
can you make a tutorial which file is imported from AutoCAD
Hi! That was great video! I am wondering if you know any resource for line art? You know, especially when you are drawing a line art section.
Hi Wei! Yes, there's a book called Manual of Section:
amzn.to/38PcOBP
It is brilliant!
u r amazing!
When I export PDF from Sketchup it exports as a lines only PDF with no fills. Do you know how to change that?
Hi Vaidas! Make sure to set the sketchup style to have fill as well. If you've got the line style applied it will result in a lines only pdf document. I hope this works for you 😁
How can i develope U-net archetucture? do you have idea bro
Where is the "Shadow" in thumbail?
Hi Nick! The shadow was done in photoshop. I just duplicated the hand and painted fully black. Then distort it and lastly reduced the opacity.
I didn't show because I wasn't part of the illustrator workflow
HI，I was wondering how to make the first step in Rhino？ Make 2D???
Hi Zhang. Sorry, but I'm not sure how to do it in Rhino. Never used it before
i love illustrator, i dont use so much photoshop. my goal is to have a good relationship with photoshop
Diana Sánchez same