Help me create more videos Consider Donating a couple bucks at the link below Thank you so much for all your great comments and support! www.buymeacoffee.com/cPnDUTmjl
Hey man, I have little (successful) experience in electronic tinkering, but I just restored a thrift store Memorex personal CD player back to playability following your directions, and I'm blown away! Thank you, you're my hero.
THANK YOU SO MUCH!!! I have ZERO experience in these kind of things and I could fix my discman all thanks to you!!!😭😭😭 It wasnt hard AT ALL, now I can listen to my taylor swift cds😭😭
your old trick really helped me. I am very grateful for that trick of yours. I repaired my Samsung MAX-B450. He is working now, and I am happy. Cheers 🥂 bro 😘
Thanks for the advice, if I don't watch your video I would buy another one, although mine got a little broke in upper cabinet, but it doesn't matter, cosmetically it's not distracting and more importantly it's Working! (Model: Sony D-EJ365)
Thanks for the video. Adjusting the potentiometer worked worked on my Aiwa boombox. I had to use needle nose pliers on the potentiometer, because the screwdriver didn't turn it.
Thanks for the super video! I opened my technica CD player and the problem was with the cd platter, I just put like 4 plastic washers so that it wouldn't fall down and needed adjusting again. For now it works again. And looking on the inside of these CD players they're not that complicated so if you're wondering if you're gonna be able to find the solutions by opening it, there is probably a 70% of finding the solutions within. I would call myself a beginner to intermediate in knowledge in electronics knowledge. If you're just a bit unsure just taking it slow is better, could take 30 minutes to days depending on how careful you want to be. If you're gonna throw it away anyways just use it as a training in diagnosing electronic.
I opened the disk thinking there's no way this would work for me, it actually did and funny enough i turned the pot clockwise it worked but then battery died so quickly so i put it back and it worked fine, well thanks sir for this lazer diode juice trick
Hi, thanks for putting this video up. I have an aiwa portable video cd player with a small screen from ages ago. I used to use it a lot back then but it hasn't been used in over 15 years. It's switching on but the disc doesn't rotate and it keeps showing a no disc message. I was wondering if you could take a look at it. Hoping to hear from you. Thanks.
it seems that on my thomson cd player the potentiometer is not accessible. but I'm a beginner so chances are I'm just not finding. Any hints? There's only screws holding the pieces together it seems.
Thank you so much Electronicle, you are Awesome 😎👍 by watching your video I literally brought back to life my Sony Car Ready ESP MAX CD Walkman D-E356CK. So simple, just by adjusting 1one little screw Thank you once again much Love & Respect 🤙👍😁God Bless🙏
Hey there. My Sony D-Sj01 reads no disk and looks like the lense housing keeps sliding inwards and makes 3 rapid clicks every couple seconds as it hits the ledge. The Discman is in pristine condition otherwise. Im stuck! Literally lol
This really helped me trouble shoot, there is a piece that is broken away from its mount, it looks like one of those fat little tubes… can that be replaced?
I have a Philip DBB portable CD player. I accidentally used 6v than it required which is 4.5v and it got very hot I turn it off right away. The sceen still turn on but just keep saying no disc. Do you think I burnt the laser part or I could actually fix it? Thank you!
I have a venturer cd / radio discman that I just picked up. The radio works fine the sound sis surprisingly really good. But when I change the switch from radio to cd and press play the display comes on for literally one second then it turns off and nothing happens. Disc doesn’t spin. Any suggestions what it could be ?
En fin de compte , tu fais bouger le petit potentiomètre ? Et tu le remets dans sa position initiale ? Merci de ta réponse. . In the end, do you move the small potentiometer? And you put it back in its original position? Thank you for your answer
Georges MILLION no. U adjust it to increase the current. If u put it back Itll just go back to not working. If you buy a new part it will come preadjusted.
IPA is not the best to use on a pot, even though it may appear to "fix" the issue. Crappy grades less than 90%+ leave not only films, but also strip away any potential lubrication left in them which in turn causes scratching over time.
Help me create more videos
Consider Donating a couple bucks at the link below
Thank you so much for all your great comments and support!
www.buymeacoffee.com/cPnDUTmjl
Oh wow! My Sony discman "died" about 4 years ago and I revived it back to life because of your video! I'm so happy. Thanks a lot!!
Thanks a bunch! You just helped me fix I CD Walkman with "no disc" I received free today! Made the current adjustment so slightly! Now I know!
Hey man, I have little (successful) experience in electronic tinkering, but I just restored a thrift store Memorex personal CD player back to playability following your directions, and I'm blown away! Thank you, you're my hero.
Saw the cd print pattern and I was like... no way... I know that disc! Thanks for the help!
THANK YOU SO MUCH!!! I have ZERO experience in these kind of things and I could fix my discman all thanks to you!!!😭😭😭 It wasnt hard AT ALL, now I can listen to my taylor swift cds😭😭
your old trick really helped me. I am very grateful for that trick of yours. I repaired my Samsung MAX-B450. He is working now, and I am happy. Cheers 🥂 bro 😘
Thanks for the advice, if I don't watch your video I would buy another one, although mine got a little broke in upper cabinet, but it doesn't matter, cosmetically it's not distracting and more importantly it's Working! (Model: Sony D-EJ365)
Thank you very much !!!!!!!
I managed to bring my broken sony discman from my childhood back to life!!!
Thank You
Thanks for the video. Adjusting the potentiometer worked worked on my Aiwa boombox. I had to use needle nose pliers on the potentiometer, because the screwdriver didn't turn it.
Good staff, learning, and teaching is good for everybody to learn at least to recycle part before goes to the land field.
Thanks for the super video! I opened my technica CD player and the problem was with the cd platter, I just put like 4 plastic washers so that it wouldn't fall down and needed adjusting again. For now it works again. And looking on the inside of these CD players they're not that complicated so if you're wondering if you're gonna be able to find the solutions by opening it, there is probably a 70% of finding the solutions within. I would call myself a beginner to intermediate in knowledge in electronics knowledge. If you're just a bit unsure just taking it slow is better, could take 30 minutes to days depending on how careful you want to be. If you're gonna throw it away anyways just use it as a training in diagnosing electronic.
I opened the disk thinking there's no way this would work for me, it actually did and funny enough i turned the pot clockwise it worked but then battery died so quickly so i put it back and it worked fine, well thanks sir for this lazer diode juice trick
Hi, thanks for putting this video up. I have an aiwa portable video cd player with a small screen from ages ago. I used to use it a lot back then but it hasn't been used in over 15 years. It's switching on but the disc doesn't rotate and it keeps showing a no disc message. I was wondering if you could take a look at it. Hoping to hear from you. Thanks.
Thank you electronicle I was able to fix the disc error of Panasonic portable disc player CT 720
Yes - Talk CD. It bottoms out my subwoofer easily.
it seems that on my thomson cd player the potentiometer is not accessible. but I'm a beginner so chances are I'm just not finding. Any hints? There's only screws holding the pieces together it seems.
Thank you so much Electronicle, you are Awesome 😎👍 by watching your video I literally brought back to life my Sony Car Ready ESP MAX CD Walkman D-E356CK. So simple, just by adjusting 1one little screw Thank you once again much Love & Respect 🤙👍😁God Bless🙏
Hey there. My Sony D-Sj01 reads no disk and looks like the lense housing keeps sliding inwards and makes 3 rapid clicks every couple seconds as it hits the ledge. The Discman is in pristine condition otherwise. Im stuck! Literally lol
Feel the calling of a miracle In the presence of the word
He'll yeah. The song never gets old for me.
Thanks dude for this video.. Now I know how to fix my discman problem...
In my aiwa XP-V731 I can't remove the screws. Some idea?😅
I've tried this it worked but then when I ressemble the case, the problem was back, and the potentiometer did nothing, did anybody known why ?
Hi,
Thank you very much for this reveal/fix. 😎😆🖒
Much Appreciated. Subscribed.
Best Regards,
This really helped me trouble shoot, there is a piece that is broken away from its mount, it looks like one of those fat little tubes… can that be replaced?
Use to have this model and loved it.
AIWA are decent players ?
Please tell me how to fix the portable cd player Philips exp 3481 without reading the disc
My sony discman broken regulator chip including smd capasitor. its to small and hard to get replacement
thanks, it helped me a lot.
no one's caught on yet lol... Awesome. Electronicle
I have a Philip DBB portable CD player. I accidentally used 6v than it required which is 4.5v and it got very hot I turn it off right away. The sceen still turn on but just keep saying no disc. Do you think I burnt the laser part or I could actually fix it? Thank you!
I have a memorex cd player that will only say "hold" when I start it up
many portable cd players had a hold switch.. what is the model?
I just got myself a 2019 Craig it’s making some kind of weird noise and also in the volume. Can you tell me what that is?
I have a venturer cd / radio discman that I just picked up. The radio works fine the sound sis surprisingly really good. But when I change the switch from radio to cd and press play the display comes on for literally one second then it turns off and nothing happens. Disc doesn’t spin. Any suggestions what it could be ?
Thanks for tutorial video i also have discman aiwa same with you and work 100% thanks a lot bro
i have one XP300...but it does not work. The CD does not spin. Good Video !!
Why does Panasonic sl-sx 325 read most cds then not others . Readout shows 0000 and then f15
En fin de compte , tu fais bouger le petit potentiomètre ?
Et tu le remets dans sa position initiale ?
Merci de ta réponse.
.
In the end, do you move the small potentiometer?
And you put it back in its original position?
Thank you for your answer
Georges MILLION no. U adjust it to increase the current. If u put it back Itll just go back to not working. If you buy a new part it will come preadjusted.
Merci pour la réponse .... Thank you for the answer .
Como le saco el beep a un discman aiwa??,,,, gracias
Does laptop dvd have these adujustments
it's work!!!! thanks a lot!!!!
You save my diskman
Does this play CD-Rs?
thanks a lot !
Mine fukin doesnt turn on with the top anymore
Plus the black part(spindel and laser part) is connected to the board by rubber circles now it wont go backstraight
fuiste de mucha ayuda !!! gracias !!!
IPA is not the best to use on a pot, even though it may appear to "fix" the issue. Crappy grades less than 90%+ leave not only films, but also strip away any potential lubrication left in them which in turn causes scratching over time.
rubber gloves just to handle discman😂😂