My first car was a 03 350z I really fumbled! I got caught with just thrashing the car & just goofing around! I don’t regret it! Cause , I hope one day to own another one & go turbo De. Hr too pricey
Nah HR is the way to go brother. Spend a couple more thousand and you can make alot more power.. DE isn't bad either though lol. Get you another one bro!
Based on this Video Alone, you should have more Subs. I just subbed. Love the sound of this car. Nice work, now post some more videos. Those look like RPF1 wheels... Love those on the rear.
@@1MADZit sounds good brother yea wouldn't expect any chop with 264s. I barely have any with my 272s lol. It would more if mine was idling correctly though. It's idling at 1100rpm lol
@@fastcarfootball8710 i seriously appreciate it ! Im planning on getting a Z before the year ends as my second car so seeing how clean your build is is inspiring 🤞🏽🔥 keep grinding!
@@fastcarfootball8710 oh, thanks I have 10.5 in the rear too I have a 275 at home but not sure if I wanna put it bc my coils are maxed out and dont wanna rub lol, by any chance are you dumped and what coils you got ?
@@luisc2425 it would prolly fit but I'm not sure. I know I have room to spare on mine lol. Coils came on the car when I bought in years ago so idk what they are set at. They are Ksports
Hi again, I also have 350Z HR, and thinking to go cammed route 🙂... I would appreciate some more info from you: Is your engine stock, besides cams/retainers/springs?....Is 272 10.8 lift, max you can go without valves touching the pistons? Was it necessary to change to billet oil pump? Also, was it necessary to change the fuell p/p and larger injectors? What is your max RPM with that setup? Sorry for bothering you too much. I am just trying to collect as much data as I can, before I start ordering things.
Alot 🤣. ISR Longtubes Full Tomei exhaust Tomei Titanium valve springs and retainers Suckerpunch billet oil pump Z1 ported upper and lower manifolds EPS 70mm tbodies Admintuning 3" intakes ID1050x injectors Walbro 255 That's what I can remember off top of my head 🤣
My first car was a 03 350z I really fumbled! I got caught with just thrashing the car & just goofing around! I don’t regret it! Cause , I hope one day to own another one & go turbo De. Hr too pricey
Nah HR is the way to go brother. Spend a couple more thousand and you can make alot more power.. DE isn't bad either though lol. Get you another one bro!
Hr is better for a turbo build. I’d suggest a centrifugal supercharger for a de
@@purgatorysplayground7501 to me a cammed HR 350z is such a perfect set up, For a boosted z i would put a centrifugal from z1 on a 370z
@@fastcarfootball8710HR is the way to go for sure. Your Z sounds really good bro!
Hr is worth the money, a good de/hr go for around the same in my area depending on mileage.
Based on this Video Alone, you should have more Subs. I just subbed. Love the sound of this car. Nice work, now post some more videos. Those look like RPF1 wheels... Love those on the rear.
Thanks brother much appreciated! 🙏. I agree hopefully will be posting more videos soon 🙂. Yea they are SBC RPF1s. I have all 4 matching now lol
Everyone runs these RPFs tbb
I subbed. This is sick. Id love to cam my HR
just subbed, i wanna see more too!
Sounds great! Did you do any mods on the intake side? Guessing 3" intakes
Are you tuned? If so how much whp did the 272 tomei cam give you?
Yes I'm tuned by Dynosty and they added about 15-30 whp
that angle is sexy... what kind of power does the cam/fbo set up net you on these? bet she sounds amazing doing some WOT twisty runs
Thanks bro and it was dynoed at 342whp 296wtq. She's definitely a screamer 😂
@@fastcarfootball8710need to hear more vids of this car 🔥🔥
@@redline350zHRwill be posting more soon 😊
Nice z bro
Hey bro, did installing the cams and valve springs increase your valvetrain noise?
Naw bro didn't make any difference at all. That noise you hear in the video is power steering... 😂 I had ran with no power steering for a month lol
Sounds like some 272s. I run BC Cams stage 2 (264/264 10.82) in my Roadster. **Easier for daily
Yea Tomei 272 procams 10.8 lift. Thats whats up bro can't go wrong with those either.
@@fastcarfootball8710 when I installed them I was hoping for really noticable chop chop but it has a mild chop.
@@fastcarfootball8710 th-cam.com/video/OyyP2pFVCvk/w-d-xo.html
@@fastcarfootball8710 did you do valve springs and retainers ? Or running stock
@@1MADZit sounds good brother yea wouldn't expect any chop with 264s. I barely have any with my 272s lol. It would more if mine was idling correctly though. It's idling at 1100rpm lol
What size cams dawg and do you have insta
Tomei 272 10.8 procams brother. Yea @treefiddyz94
More would have been ok lol
More what? 🤣
Longer video
You cut it too short I was enjoying that 😅
@vmiramon69 I'll have to make another at some point lol
What cams. Poncam?
Tomei 272 10.8 Procams
super clean bro! what are your wheel specs?? as well as the name of the front wheels would appreciate it bro
Thanks brother I appreciate it. Front wheels are ESR SR02 19x9.5 +22mm. Rear wheels are Enkei RPF1 SBC 18x10.5 +15mm.
@@fastcarfootball8710 i seriously appreciate it ! Im planning on getting a Z before the year ends as my second car so seeing how clean your build is is inspiring 🤞🏽🔥 keep grinding!
@@s0nch0z thanks again brother. You won't regret getting a Z. Cars are a blast to drive 🤘
All it needs now is matching wheels.
They been marching for a good while now though lol. This was a long time ago.
@@fastcarfootball8710 Hell yeah brother
wich are the rear rims??
I think it's an ENKEI RPF1
What final drive you running?
Stock
this sounds fyee
Thanks brother
Whats your rear tire specs?
275/40/18
@@fastcarfootball8710what wheel size is it on ?
@@luisc2425 I have the fronts matching the rear now lol. Front 18x9.5 +15mm Rear 18x10.5 +15mm Enkei RPF1 SBC
@@fastcarfootball8710 oh, thanks I have 10.5 in the rear too I have a 275 at home but not sure if I wanna put it bc my coils are maxed out and dont wanna rub lol, by any chance are you dumped and what coils you got ?
@@luisc2425 it would prolly fit but I'm not sure. I know I have room to spare on mine lol. Coils came on the car when I bought in years ago so idk what they are set at. They are Ksports
What are your front tire specs?
I have all enkei rpf1s now so tires are different than this video. Lol those in the video were 265/35/19 I believe.
what power you making with this setup?
350whp
Hi, is your car tuned with Uprev or something else?
Uprev. It's the only one you can use with stock ECU on all 350z's lol
@@fastcarfootball8710 thanks man
@@ivanjuras9450 anytime buddy.
Hi again, I also have 350Z HR, and thinking to go cammed route 🙂...
I would appreciate some more info from you:
Is your engine stock, besides cams/retainers/springs?....Is 272 10.8 lift, max you can go without valves touching the pistons?
Was it necessary to change to billet oil pump?
Also, was it necessary to change the fuell p/p and larger injectors?
What is your max RPM with that setup?
Sorry for bothering you too much.
I am just trying to collect as much data as I can, before I start ordering things.
@@ivanjuras9450id like to know the answers to these questions also. I have a 350z hr as well
What supporting mods are you running?
Alot 🤣.
ISR Longtubes
Full Tomei exhaust
Tomei Titanium valve springs and retainers
Suckerpunch billet oil pump
Z1 ported upper and lower manifolds
EPS 70mm tbodies
Admintuning 3" intakes
ID1050x injectors
Walbro 255
That's what I can remember off top of my head 🤣
@@fastcarfootball8710have a link for the valve springs retainers ?
@@jordanbash7213rawbrokerage.com/products/tomei-titanium-valve-spring-retainer-set-vq35de-vq35hr-vr38dett
@@jordanbash7213conceptzperformance.com/tomei-valve-spring-set-vq35de-vq35hr-nissan-350z-infiniti-g35-fx35-m35-ta304a-ns02a_p_11776.php
@@fastcarfootball8710 the cams you running poncams ?
freaking mint bro 👍🏼. btw what spoiler is that? looks super good
Thanks brother I appreciate it and it's a Blitz Evo-R spoiler. Lol