The LS laid the base down nice and smooth and the same with the WS for the clear, I don't think you would get a better finish than what these guns can deliver. I don't have the older WS400 but if it's anything like the Series 2 WS400 then it will be a great gun, I only have the WS400 series2 1.3HD Digital as the LS uses to much air for my setup. I've heard there is a quality control issue with the new WS and LS Digital versions where the black chrome plating is flaking off so the release of them has been delayed for you good folks in the USA, I think this only applies to the digital versions, I don't know how true this is as mine has been flawless since I got it around last October🤔👍John UK
@@outdoor_lifestyle_0149 The series 2 has minor changes made to the fan control. The older Supernovas would have a dry spot in the middle with full fan, the Series 2 attempted to fix that as well as the split nozzle orientation on the gun. A properly adjusted Series 1 will spray exactly the same as the Series 2. Don't buy the digital version because of the peeling chrome issue. The digital version is made in Italy and has some quality control problems.
I have the Entec 1.2 ETS for base , works great for me since we are in a state where its really dry and the elevation is high , it keeps the base nice and wet and doesn't modle at all , i will eventually get the 1.3 nozzle tip set for when it gets really hot in the booth , for the WS400 1.3 HD I use the 530 and the 2021 clear with it and I feel like iwata was made for Envirobase lol.
I’ve tried many guns for clear but always go back to my WS400 and been using it for years .My LS400 Entech is also my go to base gun.I was using the Sata Jet 5000 Rp when we were spraying spies water but now that we switched to solvent my Entech sprays it great .I would love to get a new WS400 HD I think mine is getting aged .
Looks sick! Great guns love them both! I want a pair of the new series 2 just not sure if it’s worth buying those since these are phenomenal spray guns. Thanks for the review keep up the good work as always!
I've used these guns over the years when custom paintig ( full resprays) great gun but not for me now . I've bought the new generation and don't use them much it may be me i don't know !!! Great vid .
If you get the chance I really recommend trying out EC530 clear it’s my favorite to spray as an everyday clear and it has better gloss retention then the DCU2021 and it lays down better as well as being able to build the car right out of a bake cycle
Kandy Man. Spray Guns Direct in England is basically just about giving away these Series 1 Iwata guns as they already have the Series 2. Don't forget since we don't live in the EU we don't pay VAT tax so you can remove the VAT from the price shown. If you're serious about getting these now is the time to strike. The GB Pound is also at a relatively low level with respect to the USD which also helps.
I didn't know the originals had plastic knobs. There's a gold cap for the ws400 that had people split. I don't know much about it but supposedly it was like a c2 cap situation it was just better for some people. Others hated it with a passion.
Damn that hood is super flat and no dirt or anything that I can see… awesome finish! I currently use the same gun for PPG essential fleet single stage and it’s hard to get a finish like that!
I spray clear with WS400 EVO 1 year all day in shop with brutal results! Mirror finish! I just buy a Devilbiss DV1 C1 cap its ok in cold days but gun is verry slow and compare to iwata bro... no chance all day long EVO for custom and mirror finish! I like Devilbiss has short trigger and it's ok in hand!
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
![Виноват ли КРАСКОПУЛЬТ[как наносить серебро на авто или металлик].](/img/n.gif)
That clear coat finish is AMAZING!!! Super flat & hardly any peel in the finish!!! BADASS!!!!
Iwata airbrushes are great guns as well thanks for sharing k man 👊👍
Best auto painting channel on TH-cam hands own!!👌🏾
Glad to hear that spread the word 💪💪
The LS laid the base down nice and smooth and the same with the WS for the clear, I don't think you would get a better finish than what these guns can deliver.
I don't have the older WS400 but if it's anything like the Series 2 WS400 then it will be a great gun, I only have the WS400 series2 1.3HD Digital as the LS uses to much air for my setup.
I've heard there is a quality control issue with the new WS and LS Digital versions where the black chrome plating is flaking off so the release of them has been delayed for you good folks in the USA, I think this only applies to the digital versions, I don't know how true this is as mine has been flawless since I got it around last October🤔👍John UK
Good to know! I was wondering when they were coming to the US!
@@outdoor_lifestyle_0149 The series 2 has minor changes made to the fan control. The older Supernovas would have a dry spot in the middle with full fan, the Series 2 attempted to fix that as well as the split nozzle orientation on the gun.
A properly adjusted Series 1 will spray exactly the same as the Series 2.
Don't buy the digital version because of the peeling chrome issue. The digital version is made in Italy and has some quality control problems.
I have first gen supernovas and I love them. You couldn’t ask for a nicer job than what you did with those guns.
Appreciate it 👊
I have the Entec 1.2 ETS for base , works great for me since we are in a state where its really dry and the elevation is high , it keeps the base nice and wet and doesn't modle at all , i will eventually get the 1.3 nozzle tip set for when it gets really hot in the booth , for the WS400 1.3 HD I use the 530 and the 2021 clear with it and I feel like iwata was made for Envirobase lol.
Super clean job
😅😅 my bad you said that ok yea man looks good
Ive just been demoing the series 2 and I'm sold! Been a sata guy for 20 years and these new ones have sold me on a switch
Thay are awesome
Thanks, really good bro, Brazil thanks you.
I’ve tried many guns for clear but always go back to my WS400 and been using it for years .My LS400 Entech is also my go to base gun.I was using the Sata Jet 5000 Rp when we were spraying spies water but now that we switched to solvent my Entech sprays it great .I would love to get a new WS400 HD I think mine is getting aged .
👍
Looks sick! Great guns love them both! I want a pair of the new series 2 just not sure if it’s worth buying those since these are phenomenal spray guns. Thanks for the review keep up the good work as always!
You are an excellent Painter sir!
Thanks for the support
Just what I needed mate ..I got one but can’t seem to get on with it lol 😂..
I've used these guns over the years when custom paintig ( full resprays) great gun but not for me now . I've bought the new generation and don't use them much it may be me i don't know !!! Great vid .
Great guns
Knee walking it 💯
check out the wider4L , picked one up and it sprayed flawless flat for base and clear
If you get the chance I really recommend trying out EC530 clear it’s my favorite to spray as an everyday clear and it has better gloss retention then the DCU2021 and it lays down better as well as being able to build the car right out of a bake cycle
Thanks for the insight 👍
Kandy Man. Spray Guns Direct in England is basically just about giving away these Series 1 Iwata guns as they already have the Series 2. Don't forget since we don't live in the EU we don't pay VAT tax so you can remove the VAT from the price shown. If you're serious about getting these now is the time to strike. The GB Pound is also at a relatively low level with respect to the USD which also helps.
Thanks for the insight 👍
I didn't know the originals had plastic knobs. There's a gold cap for the ws400 that had people split. I don't know much about it but supposedly it was like a c2 cap situation it was just better for some people. Others hated it with a passion.
The air caps are the same on the old Gold edition and the new chrome EVO WS400.
The knobs are available to replace on the older plastic ones.
Damn that hood is super flat and no dirt or anything that I can see… awesome finish! I currently use the same gun for PPG essential fleet single stage and it’s hard to get a finish like that!
Thank you
I spray clear with WS400 EVO 1 year all day in shop with brutal results! Mirror finish! I just buy a Devilbiss DV1 C1 cap its ok in cold days but gun is verry slow and compare to iwata bro... no chance all day long EVO for custom and mirror finish! I like Devilbiss has short trigger and it's ok in hand!
Evo sick gun for sure 👊
I hope this will be my next clear gun. I'm ready to pull the trigger on this one.🔥
The "HD" is High Deposition, meaning it puts out more fluid than the standard 1.3, 1.4 etc.
👍
Please tell how setting usualy you use iwata ws 400 clear thank you so much!
I thought about buying one but I’m wondering if it would work the same with solvent or if it would atomize it too well.
I'm sure it will work great 👍
Just started following u. Do u have a video that shows how u mask ur cars
If you were buying a new gun for hard to spray solvent base coat would it be the Ls400 or Dv1?.great videos
Dv1
Can you spray clear with the Ls400 entech?
It is not my gun, so I don't want to put clear in, but I heard from many people it sprays great with clear slower but flater
HD is High Delivery
Can u give us the custom formula
Reach out on Instagram
Sagola 4600 or evo for UHC? Thanks.
Evo
Thanks for reply, enjoying your videos.
Good man ,May I know the name of the mask?
3m versaflo
Sell me your old iwata that you lost the cap to
Lol it's my original first iwata can't sell it was a gift from my old boss
We need a boss like that 😅