Great video! I wish TH-camr's would do more of these. Please do more size comparisons with your other RCs. Though 6 inch preferred, I think the 5 inch may work if the seat back is adjusted but only because the Jiimny is a small vehicle.
Thank you for your comment. 5inch or 6inch will fit. The average height of Japanese men is 170cm. This One is properly 1/10 scale, so you might want a slightly larger driver for this one.
Hello! Thank you very much for such a useful video! I was just choosing between Marty McFly and MacReady. but in the end I bought Steve Rogers very cheaply (overall figure height is 150mm) and sawed off his boots. (I didn't cut off the pedals)
find the real scale based on dimensions (mostly wheelbase) and then look for proper sized figures (I tend to use scale figures for cca 180cm males and 160-170cm for womans) - then make them fit :D thats only way for driver not to look stupid small or big...
Great video mate. Really good guide for anyone planning to fix a mini driver 😊
Thank you. Was it helpful?
This kind of videos are always helpful. Thank you very much 👍🏻 i always like to put drivers in my RC
If I can help you, it will make me happy. I also have a driver in all my rc cars👍
凄く参考になりました。ありがとうございます
ご覧いただきありがとうございます！
This is such a great idea 👍🏼 Keep up the great work 👌🏻
Thank you so much!!
遅ればせながら参考になりました。
ありがとうございます。
シート加工してNECAのリプリー&ニュートを乗せようと思います。
@@Lodestone_Golem ご覧いただきありがとうございます。NECAのリプリーとニュートは持っていないのですが、男性よりもやはりちょっと小さいんですかね。ちょうどいいかもですね！
THANKS! The video helping me to choose right figure for my c74!
I hope this video is useful to you. Thank you.
Great video! I wish TH-camr's would do more of these. Please do more size comparisons with your other RCs. Though 6 inch preferred, I think the 5 inch may work if the seat back is adjusted but only because the Jiimny is a small vehicle.
Thank you for your comment. 5inch or 6inch will fit. The average height of Japanese men is 170cm. This One is properly 1/10 scale, so you might want a slightly larger driver for this one.
Hello! Thank you very much for such a useful video! I was just choosing between Marty McFly and MacReady.
but in the end I bought Steve Rogers very cheaply (overall figure height is 150mm) and sawed off his boots. (I didn't cut off the pedals)
Thank you for your comment. I didn't have surgery, but of course your method is also available.
Thinking about what to buy. Very good comparison!
Thank you for your comment! I hope my video helps you.
Parabéns! Excelente ideia fazer esse vídeo!
Obrigado. Espero que este vídeo seja útil para você👍👍
Muito bom o vídeo amigo está bem realista.👍👍👍👍👍👏👏👏👏👏💪💪💪💪
obrigado! Irmão👍👍
ナイス検証ありがとうございます
私はC74にはたしかマーティを載せたと思います
本物のシートは座ると柔らかく沈み、人間のお尻も座ると縮むので
頭はちょうどヘッドレストの位置に来るはずですが
キャラものアクションフィギュアは基本的に顔が小さく足が長く、
シートも固いのでＲＣの内装に乗せるとドライバーの上半身が妙に窓の上に露出して、
頭は屋根ギリギリになることが多いです
（あと、ハンドルも妙に大きいですよね）
なのでもったいないですが私は下半身を削除（マーティ）したり、シートを削ったりしてます
ちなみにタミヤのドライバー人形は太ももが半分の厚みで
頭も程よい大きさなので、結構リアルなサイズ＆ポジションになります
本物に近づけようとするとやはりシートか手術が必要になりますよね。
私も色んな動画を見ていて、いわゆるタミヤおじさんの大きさがC74には絶妙だなと感じました。
Cool
@@P.Trim69 Thank you
僕もジムニーに乗せるフィギュアを探している最中です。
すごく参考になりました。
なかなか1/10サイズのフィギュアってないですよね。
コメントありがとうございます！1/10のフィギュアは中々ないですよね。動かないものだと、タミヤのドライバー人形がいいサイズ感のようです。
I always have trouble finding the correct size figure. My wife had to make me one for my Fj40
Yes, I think so too. I've heard that a 12inch figure is too large for FMS FJ40.
@@MATTS_SCALE_RC it’s not exactly 1/10. It’s more like 1/7 or 1/8. Maybe a Barbie.
Maybe a 10inch or 11inch figure would fit FMS FJ40?
find the real scale based on dimensions (mostly wheelbase) and then look for proper sized figures (I tend to use scale figures for cca 180cm males and 160-170cm for womans) - then make them fit :D thats only way for driver not to look stupid small or big...
@@PachezZ thanks for the info. Took a screenshot
I think a 6-inch figure suits me best. However, I think the seat position should be set a little lower.👍👍👍
Thank you for your comment! As you say, I think the best way is to shave off the seat or have surgery on the figure.
これだけリアルなRCならリアルなドライバーを乗せたくなりますよね。
自分もネットで見つけた1/12スケール(約16cm)のものを乗せてます。
若干、座面(床面)が高いようなのでタイヤハウスの位置がボディーとツライチになるよう高さ調整してやると違和感がなくなります。
そこでできたダッシュボードとの隙間にサーボモーターを組み込んでハンドルも動くように改造中です。
各ドアも開閉式にして内装工事も計画中です。
実車同様にカスタマイズが楽しめるRCが増えて本当にうれしい限りです。
コメントいただきありがとうございます！座面の件参考になります🙇そしてすごい計画お持ちですね！C74のすごいカスタムをネットで沢山見かけて、私はまだまだ未熟だなと感じます。またぜひこのチャンネル見てください。