The antisparkle red cable is a must on 8s and above,very nice touch(correct me if i'm wrong)combine that with on/off UBEC switch great hobbywing upgrade captain!
I did an 8s conversion with a 1900 KV 4082 motor with a 12 bladed edf fan and the gecko 8's ESC. Going vertical seem unlimited and straight-line speed seem well over 100 mph....... Well over..!
So I just bought a f22 8s ultra performance from freewing. I noticed the conversation comes with a bigger 150a esc. My plane only came with the 120.. "The one that is running the 6s that your replacing " What is the benefits of running that bigger esc? And why didn't that come with my plane? But the conversation already comes with it?
Having problems getting the ele and rudder to work. Plugged them into the junction box, then plugged out of that into the receiver right? Also, where does the ubec black/red wire plug in??
Blake Parker Mike likes running them in his jets. I tend to fly the jets without for the videos You all see. Sometimes afterwords I’ll add one. Nothing on any of my F4 though
Has anyone ever had a problem with the stock bec on the 8s power systems? im wondering whether i should use it or upgrade to a castle creations cc bec 2.
The antisparkle red cable is a must on 8s and above,very nice touch(correct me if i'm wrong)combine that with on/off UBEC switch great hobbywing upgrade captain!
I did an 8s conversion with a 1900 KV 4082 motor with a 12 bladed edf fan and the gecko 8's ESC. Going vertical seem unlimited and straight-line speed seem well over 100 mph....... Well over..!
wow amazing power
Great video!! Amazing plane and pilot!
So I just bought a f22 8s ultra performance from freewing.
I noticed the conversation comes with a bigger 150a esc.
My plane only came with the 120..
"The one that is running the 6s that your replacing "
What is the benefits of running that bigger esc?
And why didn't that come with my plane?
But the conversation already comes with it?
Use a little low tack masking tape and wrap the wires together before using the pull wire!
He ended up bagging them in a ziplock then getting it through.
Having problems getting the ele and rudder to work. Plugged them into the junction box, then plugged out of that into the receiver right? Also, where does the ubec black/red wire plug in??
Ryan, Are you guys running an AS3X on the 90mm Jets?
Blake Parker Mike likes running them in his jets. I tend to fly the jets without for the videos You all see. Sometimes afterwords I’ll add one. Nothing on any of my F4 though
Is there a link to what motor and EDF fan to get
Has anyone ever had a problem with the stock bec on the 8s power systems? im wondering whether i should use it or upgrade to a castle creations cc bec 2.
we shall call you
scruffy
I thought this was 8s stock. So its 6s stock?
DivisionRc we have 2 versions. 8s or 6s stock. Ryan didn't need a new aircraft and people with 6s can always upgrade etc.
What flight time can I get out of this setup with 8s 5000 mAh?
Around 10s