Hunter MP Rotator Nozzle

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.พ. 2016
  • Rotačné trysky Hunter MP Rotator určené pre postrekovače Hunter ProSpray, PRS 30, PRS 40. Spotreba vody: cca 1/3 spotreby trysky rozprašovacieho postrekovača.
    Možnosť regulovať dostrek až o 25%.
    Nastaviteľná výseč.
    www.aquagarden.sk/obchod/actio...
    -----------------------------------------------
    Automatic matched precipitation
    The MP Rotator has the unique to control the amount of water flowing through the nozzle at various arc and radius settings, resulting in matched precipitation regardless of the nozzle settings.
    Double-Pop
    The MP Rotator’s nozzle pops up from its protected position only after the riser is fully extended, providing superior defense against dirt and debris.
    Distribution uniformity
    The various streams of the MP Rotator allow it to target all areas of the landscape evenly, yielding superior uniformity over traditional spray nozzles. Each stream targets specific areas to achieve higher efficiency and even coverage.
    Low precipitation rate
    Since the vast majority of soils gave an infiltration rate of less than 25 mm/hr, irrigating at a low precipitation rate is essential to achieve efficiency.
    The standard MP Rotator line applies water at 10 mm/hr, while the SR Series has a precipitation rate of 20 mm/hr. Either choice will avoid runoff, saving water and preventing erosion.
    Short radius (SR) Series
    Achieve efficient irrigation in narrow spaces with the SR Series. MP800SR allows for radius adjustment down to 1,8 m, providing opportunity for overhead irrigation in smaller spaces than ever before possible.

ความคิดเห็น • 7

  • @user-filiformis
    @user-filiformis 2 ปีที่แล้ว +1

    THE BEST

  • @ashokbhaipatel8412
    @ashokbhaipatel8412 ปีที่แล้ว

    Good

  • @cindy450
    @cindy450 ปีที่แล้ว

    Too fast. Makes products much more confusing.

  • @gb595
    @gb595 3 ปีที่แล้ว +2

    These rotators does not work efficiently. No waterring adjacent to the sprayer and waste of time to adjust screw on top of the rotator. So water not properly and evenly distributed over the whatever distance.

    • @cheefussmith9380
      @cheefussmith9380 2 ปีที่แล้ว +2

      That makes no sense

    • @CR-ow2wp
      @CR-ow2wp 2 ปีที่แล้ว +3

      I believe the MP rotators are intended to provide nozzle to nozzle coverage. So the area adjacent to a given spray head should be covered by another spray head nearby, and vice versa, ensuring complete overlap of water coverage across the lawn.