How To Replace Water Pump 97-04 Ford F150
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEW...
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1AEWP00026
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oJo/1AX...
• Phillips Head Screwdriver 1aau.to/oJo/1AX...
• Pry Bar 1aau.to/odx/1AX...
• Complete Metric Wrench Set 1aau.to/ogX/1AX...
• Complete Metric Socket Set 1aau.to/oiy/1AX...
• Fan Clutch Wrench
• Channel-Lock Pliers 1aau.to/oah/1AX...
• Needle nose pliers 1aau.to/oe5/1AX...
• Needle nose pliers 1aau.to/oe5/1AX...
• Ratchet 1aau.to/oJ5/1AX...
• Socket Extensions 1aau.to/oCP/1AX...
• Torque Wrench 1aau.to/okL/1AX...
• Rust Penetrant
• Drain Pan 1aau.to/oc7/1AX...
• Wire Brush 1aau.to/obY/1AX...
For More Info visit us at 1aau.to/h/ajE/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I have a great mechanic who is very honest and he has never done any work that is not absolutely necessary. That said, he has to make a living and labor in his shop runs over $100 an hour and he buys parts locally and marks them up to cover his cost of procuring the parts. As a result, I estimated that I would spend about $600 to do this job on my truck. I dreaded doing the job myself but this video showed me exactly what I needed to do. I bought the parts for less than $100 and did the job myself on my 1998 F150 in about 3 hours. This video made all the difference between struggling with the job and getting it done smoothly without any problems. I am retired and 75 years old and it really feels good that I can do something and make the equivalent of $500 on a Sunday afternoon.
I don't understand those 100+ thumbs down? Make a movie like this and show what you can do, donkey?
Hey, brother , thanks for great work !
+razor 50 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
very nice video lots of uncessary steps but needed for beginners.
Very helpful and the step by step details help alot thanks I'll be using this info soon to replace my water pump that went out today
+Anthony Hamilton Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/engine-water-pump/i/1aewp00026?TH-cam&CTA+Comment&AgTD61zlI
@@1AAuto
How long do the water pumps last on the 2000 4.6 L ? give or take ?
Is it age or miles that cause their demise ?
@@dfls5069 More or less age but you should replace atleast once on your truck then normally should last the life of the vehicle on the 4.6 and 5.4
Great job. My brother had a crack on the shroud it would over heat the engine. Put a new shroud no more over heating.
Thank you.you saved me $500.00.i do all my own work. But did not know how the pump came off my f150.have a nice day.
Thanks guys your videos really helpe me, keep making more and what I like is the way y'all explain small details but helpful.
Excelente... habia desarmado todo y no podia quitar la polea, gracias a su video cpmenze de nuevo y coloque la bomba sin problema ! Saludos
Thank you help alot got my f150 up and running thanks for the help
+Jason Laureano Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I would do star pattern on the pump if you want it even. it's not a big deal, just something different
That's a jack handle? Because I always thought it was to hold the hood up x.x lol
I just had my waterpump replaced and is now overheating just driving 1-2 miles. The thermostat was replaced also about 2 months ago.If i understand correctly on this vide for this model car the coolant system does not need to be burped like on another video on this channel which says some vehicles needs to be burn and some dont?
Mine is a 2000 and the ac compressor is on the opposite side so therefore the removal process is different.
what does it mean when my pulley or pump itself appears to be moving in and out like bobbing in and outward. I have a loud screech chip and a loud gravel in a barrel sound...
That is the first time I've ever seen someone wiggle out the fan right before taking off the shroud lol
Do you take your socks off before your shoes?
Too funny... Other that that little bit of humor, it's a great video. Very helpful, thanks.
Thanks for the comments and for watching! +Bruce L.
Very insightful thank u very much, now off to work I go
+Fuzzy D Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You put the wrong coolant in this truck. It’s should always be green coolant in pre 2004. Never orange. That’s for gmc and Chevy
Hey there just wondering if the fan is not put in the right way and broke the waterpump and bearing will that cause the truck not to move forward or backwards
Thanks for your videos friend.!!!!
+Alex Mejia Thanks for checking us out!
Instead of the factory plastic retainer clips I switched to self tapping screw it holds 10× longer
I need the clutch holding tool and thin nut wrench, your site does not list these. Any suggestions?
Cut the shroud in two pieces using zip ties or small lock nut and bolt, or.....best option go electric fan off a Lincoln Mark 8 fan , moves Hugh mount of air, but pigtail for it and buy a fan relay thermal switch kit, or thermal fan controller with relay , maybe over ride switch in the dash. Done, better power more mpg
I'm taking a 4.2 V6 out of a 97 f150 two-wheel drive do you have a video
Motor oil on the oring for water pump??? Nice.... that'll lead to premature failure. Silicon based lubricant is best...
Loosen bolts before removing belt
Thanks for making this video. I am in the process of chamging the water pump now. Can a bad water pump cause a loud tapping sound? Any reply would be gret!
it can depending on how it failed and the type of pump. if it is the pump, REPLACE IT ASAP!! there will be wear and metal shavings can plug up your radiator and cooling system requiring a replacement
Thanks for making this
+Peter Venkman Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I'm thinking it might be a good idea to, at least, inspect belts & hoses if not replace them with the water pump. They have the same mileage and age as the water pump. Sure there is an increase in money and time, but also peace of mind for us high mileage guys. Thanks for the video. My 2000 F-150 4.2L may be more difficult due to AC hoses & tighter space.
Thanks!
Good videos
Where do you buy the fan clutch tool?
Thank you!!!!!!very helpfull
Wow , I'm Loving my 95 f150 4.9 more . Oh wait , the oil pan ; never mind.
VERY GOOD .... THANKSS
So I replace my waterpump it cranks over but it won't start the coil is good but no spark
Good show only thing I would've done is disconnect battery
...
Does this work on V6 model? 4.2 engine
+Troy Trombley This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. The item in the video also will not be correct. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
What motor is this for?
Water is coming down from the front my oil pan, is it the water pump, ?
whats the little o ring for
Damn fine video sir, thank you!!!
I still think ford should have done a two piece fan shroud in these years
Grat video
thanks for the help bro
+von lastie Thanks for checking us out! 1AAuto.com
Thank you, your video helped me removed my water pump.
+Jaime Ritchie Thanks for watching. 1aauto.com
very good
+Tommy Helton Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/engine-water-pump/i/1aewp00026?TH-cam&CTA+Comment&AgTD61zlI
Very good job explaining how to do that. The only thing I would recommend is discontent the battery cable in case there might be an auto start device. If that fan comes on while your Working on it would be disastrous!
+Kraig Kearns Thank you for the feedback! 1aauto.com
Gracias no sirven ni para explicar bkencomoes que son mecánicos. ADIOS FOREVER
Can I replace the nose part when I was taking my fan off the threaded part broke off the clutch fan
can show how to torque the fan to pulley nut please
+ccprat We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
step 1 - take apart half the engine.
step 2 - good luck putting it back together
If you take apart your truck and don't know how to put it back together you should probably just take it to a mechanic lol
tanks .....ostad.....do not have any other way to get out ..cover fan.... in first step........tanks
your old fan was a wreck ! What happened ? Looks like schrapnel took out the shroud. Good repair though.
Wait, why do you keep saying my fan will be on and in the way? Dont you have to take the fan off?
Thank you this video help me a lot thank u now my truck starts to move now lol
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +jesus Madrigal
Do i have to drain the oil to change the water pump, noob question thnx
No
No
Why wouldn't you