Would have been good to see a comparison of the factory led and this light. I have more questions than answers at this point. ☝️ mainly being why anyone would wanna switch out the factory LED for this, 🤷🏻♂️ makes no sense.
KC HiLiTES I had a feeling it was meant for halogen equipped Jeeps. They will be an awesome upgrade for those Jeeps, plus y’all have awesome quality. Thanks for the reply, and for making awesome lights.
Just installed on 2020 JT. High beam works for a few seconds and then no high beam at all... Low beam is fine. I zip tied the harness. What could be the problem?
I have the model #42341 from my Jeep Wrangler. I just bought the '22 Gladiator. What can I buy from you to help me install these headlights on the new vehicle.
@@kchilites it’s tough. Mopar makes a hella lot more lights so they can build them cheaper and sell them for more with the financing of the vehicle. Plus it’s KC so you can’t make them look insane, they need to fit the look of the lights that will be mounted to the roof. . Personally, I think a non projector setup with the led chips mounted on a perpendicular tongue to the back of the reflector (parallel with the ground) proving high and low beam plus an “off-road use only” switch that increases the width and brightness would be a killer setup. With a projector you have less room for all the led you’d need, and well-designed reflector housings work well-enough.
No one talks about the great color flicker the KC's have. The remind me of my HID rerofits.
How do you insure the drl feature works with the halogen light replacement?
Would have been good to see a comparison of the factory led and this light. I have more questions than answers at this point. ☝️ mainly being why anyone would wanna switch out the factory LED for this, 🤷🏻♂️ makes no sense.
Yea,, what he said ??
Why ?? The factory LED halos are awesome
KC HiLiTES I had a feeling it was meant for halogen equipped Jeeps. They will be an awesome upgrade for those Jeeps, plus y’all have awesome quality. Thanks for the reply, and for making awesome lights.
Just installed on 2020 JT. High beam works for a few seconds and then no high beam at all... Low beam is fine. I zip tied the harness. What could be the problem?
Just another 7” light with an adapter. Put some effort into your lights and make some true 9” lights. So lazy
Will these give a dash error light for non-LED JL?
a trick: you can watch series on flixzone. I've been using it for watching lots of of movies recently.
@Louis Ernesto yea, I've been watching on Flixzone for since december myself =)
@Louis Ernesto yup, been using flixzone for months myself :)
@Louis Ernesto yea, have been using Flixzone for since november myself =)
@Louis Ernesto definitely, have been watching on flixzone for since november myself :)
Does it work with drl in 2021 sahara trim in canada
I have the model #42341 from my Jeep Wrangler. I just bought the '22 Gladiator. What can I buy from you to help me install these headlights on the new vehicle.
No antiflicker needed for halogen headlights for sport models?
Do they generate enough heat for deicing snow?
Are they the same as the jk 7 inches or are they bigger?
Are these better then stick?
Do these have the daytime running feature?
Awesome 👍
When are these going to be back in-stock?
What’s the benefit of these over stock?
@@kchilites thanks for your honesty
So these are only 7”. Folks, get yourself 9” like the originals.
Thought wow, till I saw the price.
@@kchilites it’s tough. Mopar makes a hella lot more lights so they can build them cheaper and sell them for more with the financing of the vehicle. Plus it’s KC so you can’t make them look insane, they need to fit the look of the lights that will be mounted to the roof.
.
Personally, I think a non projector setup with the led chips mounted on a perpendicular tongue to the back of the reflector (parallel with the ground) proving high and low beam plus an “off-road use only” switch that increases the width and brightness would be a killer setup. With a projector you have less room for all the led you’d need, and well-designed reflector housings work well-enough.
I have the stock halogen lights, so if i switch to these, do i need to worry about flicker issues? Is it plug and play?
So than what does the inline capacitor (jeep jl/jt led hdlt ea) do? And where does it go? @@kchilites