Unlike you, I don't like flywheel blasters, not because of the accuracy, but because they are loud. Everyone likes what suits them, we prefer Gel Blaster. Nothing personal🙂
It’s possible that the bcars are pulling off a lot of your fps, they knocked off 20-40 on average on my lower fps protean cages. Also, idk how many darts you shot through your blaster before chronoing, but flywheel blasters tend to gain a decent bit of fps after the wheels accumulate a fair bit of dart dust on them bc it adds grip to the wheels accumulate
3d print will deform and warp long before this happens. Going to look at how my worker can be retrofit with the same to integrate the BCAR and try to fit brushless motors. The injected shell can fix most of the shortcomings.
The more surface area the flywheels can grab onto and the longer they are making contact with the surface area, the more energy is transferred to the darts. That's why the Bamboos are slower than the Sabres. Although, if the surface area between different darts are the same, the FPS drops as the darts get heavier. Bamboos are more suited for springers. The lesser surface area darts have an opposite effect of energy transfer from flywheels to springers. The lesser surface area darts have less friction going through a barrel and the sweet spot differs from different combos of plunger tube air volume, springs power rate, and barrel length to achieve the desired, or maximum, FPS. As far as the accuracy, it's best to know the FPS of the blaster one will be running for most games one plays and match it to the CAR(Centering Auto Rotating) barrel's degree of twist rate - whether it is a (P)rinted-, (B)earing-. (A)ir flow diffusing (and I only know of one in the hobby that I use by #FrantzFoamWorks, which are the printed and resin cast Accu-Saber - PACAR and RCACAR respectively)-, or (S)tring-CAR (the SCAR was used first in the hobby and the original String Centering Auto Rotating barrels). Unfortunately, the resin cast Accu-Saber option is no longer in production; but the PACAR has been updated to the Final Accu-Saber, which now has a collet and it's better than the old friction fit versions. Hope that helps and everyone had a wonderful holiday season and have a Blessed New Year. Stay safe and God Bless. Yosh...
@@BradleyPhillipsYT The only modular SCAR I own is the MS-SCAR (Modular Stackable SCAR by #ACFoamWorks229). It's actually a hybrid between a PCAR and a SCAR barrel, where the barrel's housing is printed to achieve the stackable feature of the SCAR and fishing line is used to center and auto-rotate the darts in a six-string pattern. The higher the FPS, the more segments one has to connect together to get the optimum accuracy for one's desired FPS. The drawback is one's blaster's length can become unwieldable when FPS climb above 400. I've only needed one segment as the games I've participated in and blasters I've used are limited to 200FPS and below -all springers. I've never used any CAR barrels on any of my Flywheelers. Unfortunately, ACFoamWorks's Etsy page have gone on vacation indefinitely, but you're still able to contact him through his Etsy store. I'm not familiar with the RipPCAR. Have you done a review on it? I've watched so many of your content that it's becoming hard to remember them all. :D I'll have to rewatch it if you have; and if you haven't done a review on it, I can't wait what your thoughts will be on it. Stay safe and God Bless. Yosh...
These definitely are an answer for some. I know a guy that loves springers, but he also has tendinitis and always runs his favorite custom built springer cause he easily detune it for the occasion that it flares up. He's been using AEGs.
0 degree makes no sense. It's been proven the spin is a contributing factor to accuracy otherwise people would use their adjustable SCARs set to 0 degree.
Flywheelers are definitely better suited to HVZ and lower-fps battles in terms of dart wear. I don’t know how common those types of wars are in Australia but around 160-180 fps seems to be the limit of what worker darts can repeatedly take in my experience.
The taper head Dartzone Ruby darts tend to hit the highest FPS in these extreme High Crush setups. Your 110% on the money about bamboo hurting performance. Dart damage will most likely be from the wheels not the BCAR ( Test a few shots without a BCAR to verify) but it could be an edge of the printed dart guide between or at exit of the wheels scratching the darts. A high wheel could be diverting darts off the center line into the guide. But usually its foam forced into the 0.5mm gap that gets shredded.
nice, seems like frontline had something wonky about the bcar tolerance, for everyone else, it is rock solid in there, also interesting thing to note, gryphon and protean are both from the same guy, but if you pull a gryphon's trigger and a protean's trigger, the protean will feel snappier and more crisp, this is because of the gear ratio used, believe it is like 4-1 or something like that
@@BradleyPhillipsYT yeah i just checked.. uh that voice sounded so AWFUL it felt like what asmr is supposed to feel like to turn the normal voice back up
Bradley reviewing flywh(vomit sound) Bradley reviewing flyw(vomit again, but harder) Bradley reviewing flywheellers (long pause to contain that vomit gag) is like Neil DeGrasse Tyson advocating for flat earth theory. Flywheels are dead ever since we have thing like colonel wasp 77. It's cheaper than this loud crap, WAY better quality than 3d printed (carbon fiber reinforced polycarbonate shell) Way more accurate and powerful. It will not ruin your darts Super reliable (yes, AEG have reach that point with this one) and also your eardrum won't feel raped and bleed.
@NateBenson-s6i pretty useless feature when you have accuracy lol. That's only a necessary means when you can't aim, you know, accuracy by volume 😂 There's a full auto on every AEG but I personally never wanted nor needed to use it.
@@BradleyPhillipsYT I never really bothered to think about it tbh, I mean don't get me wrong, flywheels are GREAT for throwing baseball and tennis balls around, because they're so incoherent, but darts? They're great for kids toys but on our competition level, I never thought they had their place there. Also that damn banshee scream.. my old leaf blower is quieter than that 😂 the only advantage I see to this noise is you can tape a trigger and leave the blaster on the ground as a decoy and since everyone love to tag a flywheel user.. you know what?? I guess they do have their place 😂😂
Protean Complete Blaster (Frontline Foam): www.frontlinefoam.com/product/protean?sld=8
Protean Hardware Kit (Frontline Foam): www.frontlinefoam.com/product/protean-hardware-kit?sld=8
Protean (Flygonial): www.printables.com/model/815521-protean-modular-takedown-blaster
Sabre 1.3gram Tdarts (USA): outofdarts.com/products/sabre-t-darts-heavyweight-short-darts-200-pack-1-3g?ref=RIa3bVI3vXYhUs
All Sabre Distributors: springblasters.com/pages/distributors
Nitroshot Darts (USA and Canada only): dartzoneblasters.com/product/nitroshot-half-length/?srsltid=AfmBOoo3VOvlIdAEKn9Q59BhgnxlWo_K2qZ-DhwZomX2XlZ3WQgGjZ2U
Do not buy from frontline foam, people. Poor qc, poorer quality, transphobic owner, just not pleasant. There are better alternatives out there.
Do not buy from frontline foam, for a myriad of reasons. TH-cam is deleting my comments about it.
I love flywheelers, but watching the dart dust with every shot makes me understand why some people hate them
My mags were covered with it sitting in front
Unlike you, I don't like flywheel blasters, not because of the accuracy, but because they are loud. Everyone likes what suits them, we prefer Gel Blaster. Nothing personal🙂
Love the shot for the conclusion part, well done on the review
It’s possible that the bcars are pulling off a lot of your fps, they knocked off 20-40 on average on my lower fps protean cages. Also, idk how many darts you shot through your blaster before chronoing, but flywheel blasters tend to gain a decent bit of fps after the wheels accumulate a fair bit of dart dust on them bc it adds grip to the wheels accumulate
@@IkAAris521 that's true also, unlike a springer the dart doesn't accelerate through the BCAR. It only loses fps.
3d print will deform and warp long before this happens.
Going to look at how my worker can be retrofit with the same to integrate the BCAR and try to fit brushless motors.
The injected shell can fix most of the shortcomings.
The more surface area the flywheels can grab onto and the longer they are making contact with the surface area, the more energy is transferred to the darts. That's why the Bamboos are slower than the Sabres. Although, if the surface area between different darts are the same, the FPS drops as the darts get heavier. Bamboos are more suited for springers. The lesser surface area darts have an opposite effect of energy transfer from flywheels to springers. The lesser surface area darts have less friction going through a barrel and the sweet spot differs from different combos of plunger tube air volume, springs power rate, and barrel length to achieve the desired, or maximum, FPS. As far as the accuracy, it's best to know the FPS of the blaster one will be running for most games one plays and match it to the CAR(Centering Auto Rotating) barrel's degree of twist rate - whether it is a (P)rinted-, (B)earing-. (A)ir flow diffusing (and I only know of one in the hobby that I use by #FrantzFoamWorks, which are the printed and resin cast Accu-Saber - PACAR and RCACAR respectively)-, or (S)tring-CAR (the SCAR was used first in the hobby and the original String Centering Auto Rotating barrels). Unfortunately, the resin cast Accu-Saber option is no longer in production; but the PACAR has been updated to the Final Accu-Saber, which now has a collet and it's better than the old friction fit versions. Hope that helps and everyone had a wonderful holiday season and have a Blessed New Year. Stay safe and God Bless. Yosh...
What do you think of the Rippcar? Telescoping rifling segments which supposedly works with a variety of different velocities.
@@BradleyPhillipsYT The only modular SCAR I own is the MS-SCAR (Modular Stackable SCAR by #ACFoamWorks229). It's actually a hybrid between a PCAR and a SCAR barrel, where the barrel's housing is printed to achieve the stackable feature of the SCAR and fishing line is used to center and auto-rotate the darts in a six-string pattern. The higher the FPS, the more segments one has to connect together to get the optimum accuracy for one's desired FPS. The drawback is one's blaster's length can become unwieldable when FPS climb above 400. I've only needed one segment as the games I've participated in and blasters I've used are limited to 200FPS and below -all springers. I've never used any CAR barrels on any of my Flywheelers. Unfortunately, ACFoamWorks's Etsy page have gone on vacation indefinitely, but you're still able to contact him through his Etsy store. I'm not familiar with the RipPCAR. Have you done a review on it? I've watched so many of your content that it's becoming hard to remember them all. :D I'll have to rewatch it if you have; and if you haven't done a review on it, I can't wait what your thoughts will be on it. Stay safe and God Bless. Yosh...
These definitely are an answer for some. I know a guy that loves springers, but he also has tendinitis and always runs his favorite custom built springer cause he easily detune it for the occasion that it flares up. He's been using AEGs.
I absolutely love this video. I am digging the more laid back feel. Did you get a new camera? The video quality is amazing!
@CaptainShotgun007 new camera yeah, first thing I said in the video 🤣
"better spread than entry level blasters like the harrier"
dude, what?
With the orange pcar it comes with
@@BradleyPhillipsYT I think they're astonished by the reference of the harrier as an entry level blaster, lol
@@AMSPawn06it is nonetheless an entry level lol
And by the way, I use cut down Adventure Force waffle heads for my highpower flywheelers.
Many are experimenting with 0 degree BCARS also, maybe worth trying
0 degree makes no sense. It's been proven the spin is a contributing factor to accuracy otherwise people would use their adjustable SCARs set to 0 degree.
@@BradleyPhillipsYTI think he meant it in the sense of keeping darts in "acceptable" trajectory without spin, because you know.. flywheelers 😂
I had this thought before you tested. Going 0 degree was previously the only semi-feasible way to try to ‘stabilise’ a flywheeler.
Flywheelers are definitely better suited to HVZ and lower-fps battles in terms of dart wear. I don’t know how common those types of wars are in Australia but around 160-180 fps seems to be the limit of what worker darts can repeatedly take in my experience.
Low fps games like 160-180fps are definitely not as popular here.
Good one bradly
How much variance does outside wind add to your accuracy calculations? Just wondering.
@@grantponciano9386 not much at all
The spanish track physically hurt me
@@santi-37919 Spanish track?
@BradleyPhillipsYT youtube included an audio track that translated the video to spanish, automatically I assume since you don't seem to know
@@santi-37919yeah I think that's a new feature. Can do it to multiple languages.
Oooof! 300FPS?! 😮
The taper head Dartzone Ruby darts tend to hit the highest FPS in these extreme High Crush setups. Your 110% on the money about bamboo hurting performance.
Dart damage will most likely be from the wheels not the BCAR ( Test a few shots without a BCAR to verify) but it could be an edge of the printed dart guide between or at exit of the wheels scratching the darts. A high wheel could be diverting darts off the center line into the guide. But usually its foam forced into the 0.5mm gap that gets shredded.
0:50 i love that reference!
nice, seems like frontline had something wonky about the bcar tolerance, for everyone else, it is rock solid in there, also interesting thing to note, gryphon and protean are both from the same guy, but if you pull a gryphon's trigger and a protean's trigger, the protean will feel snappier and more crisp, this is because of the gear ratio used, believe it is like 4-1 or something like that
This did feel nicer than a Gryphon.
@BradleyPhillipsYT yeah, it is extra noticeable when you use them both in a day, such a big difference
🤢 Flywheel....grrr.
🤮 3D print...grrr.
😵💫 Noisy....grrr.
Kill the darts? 😮.... garbage 🗑️
These are dead ends 🛑😅
am i just getting trolled or is this video in ai french voice?
@@masteredmello1959 you must have an ai voice selected?
@@BradleyPhillipsYT yeah i just checked.. uh that voice sounded so AWFUL it felt like what asmr is supposed to feel like to turn the normal voice back up
Time to upgrade lol
Bradley reviewing flywh(vomit sound)
Bradley reviewing flyw(vomit again, but harder)
Bradley reviewing flywheellers (long pause to contain that vomit gag) is like Neil DeGrasse Tyson advocating for flat earth theory.
Flywheels are dead ever since we have thing like colonel wasp 77. It's cheaper than this loud crap, WAY better quality than 3d printed (carbon fiber reinforced polycarbonate shell)
Way more accurate and powerful.
It will not ruin your darts
Super reliable (yes, AEG have reach that point with this one) and also your eardrum won't feel raped and bleed.
I can make a flywheel blaster shoot 30 rounds a second, show me the aeg that can do that
@NateBenson-s6i pretty useless feature when you have accuracy lol. That's only a necessary means when you can't aim, you know, accuracy by volume 😂
There's a full auto on every AEG but I personally never wanted nor needed to use it.
But, did you expect to ever see a flywheel blaster that can shoot like this? I did not. Hence why I made the video.
@@BradleyPhillipsYT I never really bothered to think about it tbh, I mean don't get me wrong, flywheels are GREAT for throwing baseball and tennis balls around, because they're so incoherent, but darts? They're great for kids toys but on our competition level, I never thought they had their place there.
Also that damn banshee scream.. my old leaf blower is quieter than that 😂 the only advantage I see to this noise is you can tape a trigger and leave the blaster on the ground as a decoy and since everyone love to tag a flywheel user.. you know what?? I guess they do have their place 😂😂
no way theres a accurate flywheel
There is now