Selecting a Recurve target bow and setting it up
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2017
- There is so much choice for consumers when it comes to buying a recurve target bow. I wanted to run through the bits on the bow, how much it costs, what you need and basic setup.
www.archeryshop.com.au
Steven Hann
Archery Supplies - กีฬา
At least your an honest salesman !! That's worth a lot in my book.. There are archery shops that I know around me and 1 in particular that open up a 6 pack of cheap training arrows worth about 28 quid a box and sell the arrows for 13.50 each.. I never set foot near the place.. Grinds my gears that there selling those arrows to parents for there kids bows.. Some of the parents probably say no that's too expensive a hobby !!
If you are so stupid to spend that much on arrows, without reading first, you deserve to be scammed
Now 82 years and trying to get back into the sport. Great video. Thanks so much.
Edward Hanton wow! U still alive?
Hi Steven, top video, this is one of the best, if not the best intro to buying and basic recurve bow setup videos I have seen. Loved it!
This Is the Best for anyone to understand, you put this over Very very well with the details that are often forgotten >> Thank You !!
I'm just investing in my first recurve and this video has been extremely helpful - thanks a lot 👍
Been watching your videos the last couple of years and have learned so much from them. Thanks for sharing!
Some of the best advice I have found anywhere. Thank you.
Much respect for your honesty!
Steven, thank you for a very informative video. You do a great job and hope you keep them coming. One thing on the tie on nock set I like it as you can adjust it if need be. Thank you. Alan
Brilliant. This is very helpful. Thank you so much.
Appreciate your videos. If I lived in Oz I would buy everything through your shop.
I wish I could like this video more than once. Always humble and honest comments!!!
Thankyou so much once again.
Such good info Steve.
YOURE FINALLY BACK TO MAKING VIDEOS :DD
Such a great and informative video
love your videos, check every day and there is usually a new upload for me to watch. I'm a compound shooter but I still find myself watching your recurve videos all the same.
I now have a top quality Win and Win Recurve bow (with all accessories), which is my first bow ever owned. Have just ordered a new target. I'm now subscribed to your great videos Steven, as I need as much advice and help as possible. Looking forward to my new hobbie, and once I get more knowledge and experience I'll consider joining a local club (United Kingdom). Thanks for your tips & honest advice.
The other way round - you aquire more experience joining the club
Great looking bow. Love the colour coordination but you need red spin wings on your arrows!!😄😄😄
Wow ! "A Truthful Sales Person." Now that is "TRUEFULLY KOOL". Thanks for this great video.
You are a cool dude! I like your videos.
I have a B&R F156 basic shooting kit. Am planning to buy stabilizers soon🙂
The first decision should be to decide on your goal before spending this much money on a professional kit with all the potential bells and whistles. Also, consider whether you're up to shooting two to three hundred arrows a day every day to become good enough to shoot competitively.
Thanks Steven. Great post. Just bought a couple of target boys from your store for my sons - had about $500 each and was very happy.
Question - What is the red silicon? band around the top and bottom of the riser where the limbs slot in? I have never seen this before.
Steve, don't forget that there are those of us that are disabled. I now have to shoot a 64" so as not to catch the string on my wheelchair! I wish more companies, (such as Hoyt) would think about that! 😊😊😊
Very informative, thank you for the vid.
Your vids in the past, you've shown "premium" and "top price" Olympic style recurve bows.
Your mission, if you choose to accept it, . . . is to create an Olympic style recurve UNDER $800 complete, including arrows n release aid.
In short, for those on a budget.
Can you do it?
Hey Archery Supplies, What target recurve bow for a 9year old (been shooting with a club bow for a year now)
He's 130cm tall (4ft), and a 21" draw length. Budget is around 300euro
I have a very good Mybo V bar because it matches my chosen colour scheme which is grey and red! God, to have an artistic bent! 😅😅😅
Love your videos! Have a quick question - I've measured my draw length at about 28", from groove in nock to the deepest part of grip at the throat, as per the usual way of measuring. Is that my draw weight that I can use to gauge how much weight I'm pulling on my fingers? So in this case I'd be pulling approximately the weight specified on the limbs - ie. I'd be pulling 30lbs on the fingers for a pair of limbs marked 30# ? I've read on various websites that I should add another 1.75" to the initial measurement of 28", so that would give me a draw length of 29.75", so I'd be pulling more than 30lbs and probably nearer to 33/34lb on 30# limbs. So my question is - is my draw length 28" or 29.75", as this measurement has a drastic effect on when I'm choosing the weight of limbs to buy? I'm looking at Winners & Win & Win limbs just for example as I know manufacturers use different measurements for their limb weights. Thanks for any clarification on this. I'm sure this confuses a lot of people so would be good to know what's the correct measurement.
Mind, you can tune the arms in riser to get slightly more or slightly less draw force
Hi, I I see ee you use the Deut Tawant. Isn't too cheap for a high quality bow?
Greetings from Germany
How does not have more likes.....
Is that bow decut basha pro?
Metal nocking points hurts like hell if you get hit by the string, and miss the armguard. I Still have a mark from one, and it is two month ago since I shot a club bow that had metal nocking points and the wrong brace height and no armguard.
i find a brass nock can tear up the tab a bit as well. nice video Steve, i am new to the 'curve too, our rigs are very similar. as a long time compound shooter i find Recurve to be brutally unforgiving, immensely rewarding,supremely challenging and absolutely fun, i get the "newbie" joy of archery again.
HELLO STEVE I AM INTERESTED TO BUY RECURVE RISER HOYT FORMULA X SO I WOULD BE INTERESTED IF YOU CAN MAKE VIDEO ABOUT THAT RISER?? THANKS BY THE WWAY I LIKE AND FOLLOW YOUR VIDEOS .
Well about tab, i think you do not need a cardivan skin but cut out lether from belt or old shoes and make rorm u like and pinch em between two cheap tabs. heavy one hd avalon and light one xenia jw1 that has same shepe as seaker, 20€ price all. learher from old shoes and this tab i made lasts me a 3 years. sight is 20€ aluminim and i have expencive pin. screwai remeade holsremade to stainless steel, no loose screws for 2 years.Lkimbs well here i put uukha x1evo2 38 lbs in draw lenght 31,5 makes 43 pounda.
350€. riser sf forged and think do not need bether.
So money is no object.
I wonder if owners of expensive shafts cry when they break, I know I would
Hey I have the EZR too :D lol
With spray paint, everything can match the bow lol
I don't see these arrows on your website.
great, but no ones listen that, so sad
Hillary Cliton
Says it all as this wanker cannot speak for himself.Billiary is a disease,Clit on says what you are
How can you not know wether you want to shoot compound or recurve ?
Why does a semi-serious target archer buys a bow and gear for 3000 usd when he himself says he could get away with a setup 6th the price and wouldn't really shoot worse? Because he can afford it. Oh and it matches his colors. Important stuff.
sorry but im shooting with a £40 sight and didnt have anything on it come loose even once, suggesting that spending over $300 will give you a guarantee of quality is just false.
Now i wana know something mate, what the fuck is incompatible riser. Theres no such thing as ILF foam limbs not fitting an ILF riser. The limb can be twisted, the riser can made by a chinese dude in a shed with 0 quality control, the riser can have prioprietary fittings like the hoyt its-ment-to-be-paid-PRO but thats what warranty is for. Seriously if my ilf limbs did not fit ilf riser i would take them to the store myself and ask for manager immediately before the clerk can finish the word "incompatible".
Ex-appeal... Who thought that was a good name? 🤣
Hah my other lifetime obsession is bicycle racing. The world of carbonfiber. A decent CF wheelset is $2000. My race bikes are at least $7000-$8000 each. Archery is cheap. but same "marginal gain" investment trap :-)
$3,000 invested in a bow and has a cheap,crappy plunger button?? He would never be able to tell the difference between tied on or crimp on string nocks if he shoots crap anyway?
PSE is not a good brand
Your encouragement into archery giving a two fold to beginner into archery, it sound good and terrible.
If he was an elite archer he may notice the difference between a $500 and $2,000 bow? But he spends $3,000 on that PSE.What a contradiction!! Cannot believe anything he says!
I understand it like, because he just can afford it