Vivaro project Pt7. Stripping down the front seats ready to repair.

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น • 36

  • @thetruth7633
    @thetruth7633 2 ปีที่แล้ว +2

    Thanks, they are nuts in The Netherlands, the breakers as 300-400 Euro for a worn seat!
    I used to buy good ones two years back for 75 Euro.
    I have found a company that sells new foam for 89,- for the driver seat, lower piece.

    • @LarcsWorkshop
      @LarcsWorkshop  2 ปีที่แล้ว

      Wow, that's expensive for used seats. I looked at new foam but decided to repair instead.
      Cheers Larcs 👍

  • @peakyparttimers9362
    @peakyparttimers9362 4 ปีที่แล้ว +2

    You can buy just the covers. I did and it was only £30. Got the fitting on one of my videos on me channel. Hope this helps in the future.

    • @LarcsWorkshop
      @LarcsWorkshop  4 ปีที่แล้ว

      Thanks for the info 👍.
      Cheers Larcs.

    • @tedy2009tedy
      @tedy2009tedy ปีที่แล้ว

      Where you found the covers?

  • @mattek1985
    @mattek1985 4 ปีที่แล้ว +1

    Fit Seats from opel vauxhall astra h looks nice

    • @LarcsWorkshop
      @LarcsWorkshop  4 ปีที่แล้ว

      Thanks. I'll have a look 👍.
      Cheers Larcs.

  • @colinlong2009
    @colinlong2009 2 ปีที่แล้ว +1

    I also have insignia seats which I was thinking of putting in my Vivaro. The only thing I was iffy about is the cable that goes into the seats. Would I be risking an airbag light?

    • @LarcsWorkshop
      @LarcsWorkshop  2 ปีที่แล้ว

      The only cables on my Vivaro seats goes to the seat belt pre-tensioners. If this is disconnected it will more than likely bring up an air bag light. If I do it (eventually?) I'll use the Vivaro pre-tensioners on the new seats.
      Cheers Larcs 👍

    • @colinlong2009
      @colinlong2009 ปีที่แล้ว

      I finally installed the Insigia drivers seat in my Vivaro. It took some modification but its much better than my old seat.
      I had to cut the brackets off the insignia seat that used to hook into the ground of the car. I then removed the metal box the vivaro seat rests on to allow me to line the rails up correctly.
      The insignia seat rails were about half an inch too wide for the box on both sides so I made 4 brackets from flat steel which made it all fit. I transferred the old seatbelt tensioner and seatbelt clasp to the new seat (old bolts fit the insignia) and all done.
      It was fiddly, but worth it. I have pics of the mods if anyone needs them

  • @kevinmill7965
    @kevinmill7965 3 ปีที่แล้ว +1

    So what the insignia seats for.... do drivers seat from insignia fit vivaro

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว

      Hi, no the insignia seats won't bolt straight in, I would have had to modify some bits. I got them when I was going to have 2 single seats in the front, and they were free😁.
      Cheers Larcs 👍

  • @callumraybould9860
    @callumraybould9860 3 ปีที่แล้ว +1

    Have you sold the swivel base yet

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว

      Sorry, I've fitted it and using it now. th-cam.com/video/wcFD5dnRp34/w-d-xo.html
      Cheers Larcs 👍

  • @johnTomsie
    @johnTomsie 3 ปีที่แล้ว +1

    Hi, I'm trying to take out a double passenger seat in my Vivaro. The bolts don't hold the socket it keeps slipping out, but if I go to tighten it more it's fine. Did you have any problems taking it out, what size torx did you use on the 5 bolts. Thanks John

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว +1

      Hi John, mine are T50 torx. They were tight but not a problem. Perhaps someone has damaged them previously? Good luck getting them out🤞.
      Cheers Larcs 👍

    • @johnTomsie
      @johnTomsie 3 ปีที่แล้ว +1

      @@LarcsWorkshop got them put earlier eventually.

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว

      @@johnTomsie Good news👍

  • @rambosskidlid2459
    @rambosskidlid2459 4 ปีที่แล้ว +2

    How much do you want for your swivel base larcs?

    • @LarcsWorkshop
      @LarcsWorkshop  4 ปีที่แล้ว +2

      Thanks, but I'm not going to sell it yet, just in case. You never know, things change, it might turn into a camper build? Unlikely, but like I said 'you never know' 😉.
      Cheers Larcs 👍

  • @ourvanviv8858
    @ourvanviv8858 4 ปีที่แล้ว +1

    Hi, im after a new seat base if your getting rid

    • @LarcsWorkshop
      @LarcsWorkshop  4 ปีที่แล้ว +1

      Thanks, I'm not going to sell an bits ATM until I know what is definitely happening to the Vivaro? Things change and don't want to have to 're-buy' stuff. Thanks again though👍.
      Cheers Larcs

    • @ourvanviv8858
      @ourvanviv8858 4 ปีที่แล้ว +1

      I dont blame you, i keep toying with the idea of a single seat for my build but still not sure

    • @LarcsWorkshop
      @LarcsWorkshop  4 ปีที่แล้ว +1

      @@ourvanviv8858 Same, but the double is so handy, especially with no back seats.

  • @Jake-sf3bj
    @Jake-sf3bj 3 ปีที่แล้ว +1

    What seats will go straight into a vivaro without modifying? Cheers

    • @Jake-sf3bj
      @Jake-sf3bj 3 ปีที่แล้ว

      #drivers seat?

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว +1

      I don't know, sorry.

    • @tedy2009tedy
      @tedy2009tedy ปีที่แล้ว

      Someone told me Audi tt driver seat is the perfect one. I haven't tried yet

  • @scottcoles8357
    @scottcoles8357 3 ปีที่แล้ว +1

    Have you sold the swing plate yet?

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว

      Not yet, we might be camping in it later this year so don't want to sell it yet👍.
      Cheers Larcs

  • @BrothersGrim2012
    @BrothersGrim2012 3 ปีที่แล้ว +1

    I’m looking for 2 single seats for my trafic do you still have the 2 single seats ?

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว +1

      Sorry, I'm keeping hold of it just incase I change my mind.
      Cheers Larcs 👍

    • @BrothersGrim2012
      @BrothersGrim2012 3 ปีที่แล้ว +1

      @@LarcsWorkshop that’s cool worth asking though 👍👍

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว

      @@BrothersGrim2012 No problem 👍

  • @keiths-teeth
    @keiths-teeth 3 ปีที่แล้ว +1

    A bit of a nightmare doing this job, I've put my findings in a video on my channel.

    • @LarcsWorkshop
      @LarcsWorkshop  3 ปีที่แล้ว

      Nice, I'll have a look 👍.
      Cheers Larcs