#MRHEATER

Show your support for THEMOWERMEDIC1’ www.amazon.com/hz/wishlist/ls...
Help support my Channel by checking out my extensive parts store here on amazon
Check out this page from THEMOWERMEDIC1
➡️www.amazon.com/shop/backwoods...
PTOOLS I USE DAILY
MILWAUKEE 3/8 socket set
➡️ amzn.to/3N3ulda
1/4” socket set
➡️ amzn.to/3MTyQaf
Oil evacuator
➡️ amzn.to/3MQM33P
Lawn mower lift
➡️ amzn.to/38lKhsr

[@Big_Johns]

As long as the wives are happy we are all happy. 🙂👍

[@jimbrewer2893]

In the jet engine business, we call that a compressor stall with flameout.

[@THEMOWERMEDIC1]

Photo eye was dirty

[@lavernperkins5569]

5 gallon #2 diesel and 1 gallon gas thins diesel so don’t smell up with fumes because some say you can run jet fuel in them.

[@sswcustomsewing4276]

I remember the old blue reddy heat torpedo heaters had a screw to set the mixture if that got clogged with dirt they would do the same thing. Moisture in the fuel tank will make one act up. Blistered, wore, or improperly gapped spark plug will make one act funny. Also fuel tank cap or tank vent not breathing or plugged with debris will do this. Dirt or moisture accumulated in the fuel system will do this to these heaters. If you add a little isopropyl alcohol to your fuel it reduces the odor and helps with any moisture in the fuel tank. I remember my dad used a good funnel with a water separating filter for racing fuel every time he filled his torpedo heater because it made a difference in heater performance.
Great video 👍

[@martinflanagan2506]

Happy wife, happy life, no strife.

[@marks79luv]

Spitting fuel means that the fuel pump flow needs adjusting on the back next the gauge with flat blade screw driver, under troubleshooting

[@speedy94-]

Thanks fella , just fixed my heater!

[@philliphall5198]

I have the 50 year old ones and air filter and clean spark plug
It’s very reliable, both are

[@mr1pearl]

Thanks for the tip glad it was an easy fix 👍

[@randallwegman1028]

Have a newer Craftsman that wouldn't start or stay lit. Cleaned the nozzle out real good and it fired right up.

[@THEMOWERMEDIC1]

Taryl did a video on just that

[@dosiodosev740]

You are soo diverse tech, fun to follow

[@wendyfincken5931]

What if u changed the photo cell still isn't igniting new filter everything is a go except kerosene might be bad as everything else is working we don't get it. We worked the psi too and still not igniting. What eider can it be other than kerosene or the board?

[@philliphall5198]

Clean plug

[@THEMOWERMEDIC1]

I would, if it had one lol

[@joeknipp6698]

What happened to that front tire ? Got flat and sat for a while ?

[@THEMOWERMEDIC1]

They haven’t held air since day one, time to go to Harbor freight and get some flat free tires

[@darthjar9117]

Diesel burns dirtier than kerosene

[@THEMOWERMEDIC1]

Nah

[@lilvedo1]

Mine runs fine for about 10 minutes then turns off any suggestions

[@zakwall4435]

nozzel probly getting pluged or need to adjust psi check for cracked fuel lines.

[@danielf7055]

awesome thanks i was having same problem now i know how to fix it thanks for your time and efforts