Thank you for the video. Had to laugh when you were talking about getting oil on the blacktop, some people just have no clue. Never travel to and from a job without getting paid.
Thank you Warren. You do the same work I do up here in Canada. You are an invaluable resource to the farmers/construction industry equipment owners in your area. Good to see how much "give a crap" you put into your jobs. I wish everyone was that way.
Busy and a nice day it seems is a good combo. Replaced a handful of water pumps on New Hollands as well. Not fun having to fiddle, clean, and seat everything properly in a tight space CAN'T SEE CRAP!
Shit !! Warren you don't whistle any better than me ! I have more fun just listening to you talk, make fun of yourself. You must be the WORLDS BEST tractor mechanic. Keep making them videos
Warren, What I use to keep my head clear is Zyrtec. I get this at Costco, if there is a Costco down there around Klamath Falls. But I still like your channel. Keith McDaniel
Great video good friend of mine had a Mack kept over heating.. I told him water pump well after new radiator thermostat and all kinds is shit .. guess what Oly propeller has fallen off the water pump who knew 🤷♂️. Lol 😂
I was in the tour bus business while i was at a indy racetrack the bus i was in developed a antifreeze leak on the pit area of the track. It was a tiny leak caused by a motor rebuild where a metal antifreeze hose was rubbing against a bolt. You would have thought I peed in their cheerios they went nuts. By the way you work 3 times as fast as any mechanic That ever worked for me.
I have a 6150R at my place that everybody hates. 2200 hours, 1 complete engine because of a pin hole in the block drained all the water, and ever since the engine change at 754 hours, we have burnt 7 or 8 turbos on warranty because of what we believe is because of the EGR and the like. Can’t wait to get it out of warranty so we can delete the thing. The 6145r we have on loader duty is a little better even though we had to send it back because the cab controller went flat dead. 7430 or 7710 would be much appreciated if you want to send one my way.
Thank you all the way from Ukraine. You helped us figure out new to us used jd6920 (tractor was overheating, turns out that big pipe from radiator was dead cold). After laughing my ass of reactions and comments of my father while I was translating English to him we dig out completely screwed that plastic fan/flange?(don't know proper english term. Sorry). So thank you for video. Keep up the good work.
I go down to the paving outfit 1 mile from me and pick up some millings. Put it on the driveway and mix a little oil in and guess what it turns into?Drive over it and it gets as hard as a wedding haaaa well you know.
I was just wondering if you ever seen a 7810 with the 8.1 litre with the snap ring removed (had to as it was jammed in there ) Fab a puller and it’s pulling the impeller off .
warren i had jd 9500 combine that said it was hot changed the thermostat's still said it was hot so figured sending unit so changed it started combine up seemed ok,started driving to the field hot engine buzzer went off by then i was pissed. called jd mechanic to come out he put heat gun on differnt parts of engine temp was saying around 185 pointed at gear driven water pump it said150s,pulled it off it was busted.he said that was the first pump he ever seen do that.
Any info on how to change alternator belt on that same tractor. Alternator doesn’t seem to have any slack adjustment ,does it just unbolt off then bolt back on ?
When I was young my friends would make fun of me and call me the Blue goo king but sure as shit I never had a leak. I have laid off the gasket sealer for quite a while now.
Jim Detchon I Agee 100% why do they always have to change something that is proven itself not only reliable but mechanic friendly. It’s a win win ! I guess they call it progress? Lol!
Great Video warren 👍👍👍 How much did you paied for your texa software??? Is it really that good?? Do use also use or have the service advisor from John deere? Thanks Greets from Austria in Europe
@@westerntruckandtractorrepa1353 Ok thats nearly the same price here in Austria .... i saw sometimes the service advisor in our local JD workshop. Fucking great impressive thing. But only for the deeres Are you self employed ? 🤔 Can imagine that you earn a lot of money with your work and Knowledge.i see sometimes that you have to travell long distances to your repairs. Hope thats paid also (here in Austria you will earn a lot of money with this job when you are good)👍👍 Good Day warren
My chuckle for the day " shut up man, go away" coming from the guy who is usually so mindful of how he speaks to others... lol lol You should have told him that he needs to" proceed with making sure that his top lip is making full contact with his bottom lip" heheh
I am sorry but I do not understand why you would not get payed on their property. It's the machine of them you repair. Isn't it possible to make picture's of you're job, and the machine before you start anyways?????? Greets from the Netherlands
I want a stand alone John Deere water pump petrol fueled or solar powered or single phase electricity ( 220-260V) with head 40m and suction of dirty water 15m deep, and pump 450m away
Well i'm thinking asphalt is made with diesel fuel, Sand, Rock and heat... Once asphalt hardens and oil is spilled and left there... It softens the pavement. Not that it matters though...
Rick O'shay Asfalt is made of bitumen oil, a Bi- Product of crude oil refining. “Crude oil” is the pure oil coming out of the ground... And as flat is a mix of bitumen, gravel rock, and a few other ingredients that make it stiff as it get cold, ( as of under 200˚ F)
Yeah I know this is an old video but holy crap the amount of people who don’t know anything about the number things they use on a daily basis are part or in whole made from oil and it’s byproducts. It’s not all used for fuel 90+% of the plastic is used too make every phone or iPad or laptop computers but they wouldn’t give up their devices to save the climate. Then the meds that millions if not 100s of millions use daily all the capsules and pill bottles the filler in tablets and millions of other products made with big scary monster oil. So if you ban fossil fuels it would shove the whole world back to the Stone Age.
When your in the field and you think they might not wana pay it's good to leave something un hooked ((intentionally)) that will grenade the machine but of course if they do pay just tell them you wana do a once over befor you leave to make sure you didn't forget something then hook it back up.
I got my ass chewed on for spilling hydraulic oil from a roller on new asphalt by the jobsite foreman, apparently when the inspectors run the sonar over new asphalt different oil can come up as a void in the mat and the state will make you grind it out. Doesnt hurt anything but the pocket book.
I prefer working on older equipment. The company I work for has an average fleet age of 19. The oldest is pushing 30 years old. Can't work on modern equipment if you can't work on the technology it was built on, in my opinion.
If you believe that, then you need to rip up every asphalt highway in the country, their primary ingredient is oil and it's laying on top of the ground. You're obviously not a field mechanic and from an urban area.
New tractors run about 1,300 or so before a water pump job. That's a good tractor 🤘
Thank you for the video.
Had to laugh when you were talking about getting oil on the blacktop, some people just have no clue.
Never travel to and from a job without getting paid.
Didn’t expect to find a video on this model made job 10x easier thanks
those clamps are hard to get off, are the best thanks for a show. you spend a lot of time for us.
Thank you Warren. You do the same work I do up here in Canada. You are an invaluable resource to the farmers/construction industry equipment owners in your area. Good to see how much "give a crap" you put into your jobs. I wish everyone was that way.
Busy and a nice day it seems is a good combo. Replaced a handful of water pumps on New Hollands as well. Not fun having to fiddle, clean, and seat everything properly in a tight space CAN'T SEE CRAP!
Your videos are great Warren. As an Ag mechanic i always enjoy it when people say how many hours are on the machine they are repairing.
Thanks for sharing and thankyou again for that info this morning much appreciated! 👍have a good week bud !
Warren. Your a professional, the customer just didn't care.
Shit !! Warren you don't whistle any better than me ! I have more fun just listening to you talk, make fun of yourself. You must be the WORLDS BEST tractor mechanic. Keep making them videos
Warren, What I use to keep my head clear is Zyrtec. I get this at Costco, if there is a Costco down there around Klamath Falls. But I still like your channel.
Keith McDaniel
Great video good friend of mine had a Mack kept over heating.. I told him water pump well after new radiator thermostat and all kinds is shit .. guess what Oly propeller has fallen off the water pump who knew 🤷♂️. Lol 😂
I was in the tour bus business while i was at a indy racetrack the bus i was in developed a antifreeze leak on the pit area of the track. It was a tiny leak caused by a motor rebuild where a metal antifreeze hose was rubbing against a bolt. You would have thought I peed in their cheerios they went nuts. By the way you work 3 times as fast as any mechanic That ever worked for me.
Environmentalism, the new extremist religion.
I have a 6150R at my place that everybody hates. 2200 hours, 1 complete engine because of a pin hole in the block drained all the water, and ever since the engine change at 754 hours, we have burnt 7 or 8 turbos on warranty because of what we believe is because of the EGR and the like. Can’t wait to get it out of warranty so we can delete the thing. The 6145r we have on loader duty is a little better even though we had to send it back because the cab controller went flat dead. 7430 or 7710 would be much appreciated if you want to send one my way.
I started lmfao when you said I can't find my two knuckle heads
Thank you all the way from Ukraine. You helped us figure out new to us used jd6920 (tractor was overheating, turns out that big pipe from radiator was dead cold). After laughing my ass of reactions and comments of my father while I was translating English to him we dig out completely screwed that plastic fan/flange?(don't know proper english term. Sorry). So thank you for video. Keep up the good work.
Nice job warren as always!
Guessing that alternator fits something else, being the extra ribs on the pulley, or the belt is too skinny. Another great video Warren.
Take care!
Great videos ... Big fan thanks for making them .Have you thought of a magnetic mount for your GoPro?
I kept tilting my head to look around the fan shroud so I could see what he was doing in there lol.
Warren do you attract trains they seem to be everywhere you are including at your house
I go down to the paving outfit 1 mile from me and pick up some millings. Put it on the driveway and mix a little oil in and guess what it turns into?Drive over it and it gets as hard as a wedding haaaa well you know.
That water pump is a hell of lot easer than the one on my old 2640 you got to pull the rad. to change it.
great video warren could you do a vid on the injectors on the 6.7 please I have worked on 6.0 6.4 not 6.7
Alway good Warren thanks for sharing 👍👍
I was just wondering if you ever seen a 7810 with the 8.1 litre with the snap ring removed (had to as it was jammed in there )
Fab a puller and it’s pulling the impeller off .
It’s the water pump lol forgot to mention that it’s been a fun day with the 7810. I was wondering if you ever seen this and what you have done?
warren i had jd 9500 combine that said it was hot changed the thermostat's still said it was hot so figured sending unit so changed it started combine up seemed ok,started driving to the field hot engine buzzer went off by then i was pissed. called jd mechanic to come out he put heat gun on differnt parts of engine temp was saying around 185 pointed at gear driven water pump it said150s,pulled it off it was busted.he said that was the first pump he ever seen do that.
Sounds like it needs the t-stat and a few hoses also .
Any info on how to change alternator belt on that same tractor. Alternator doesn’t seem to have any slack adjustment ,does it just unbolt off then bolt back on ?
Front axle has a steering angle sensor,has the tractor got gps guidance?
When I was young my friends would make fun of me and call me the Blue goo king but sure as shit I never had a leak. I have laid off the gasket sealer for quite a while now.
There is no problem with the Parkingswitch. It is a
electronic immobilizer
whats a ETC.001 code 923.01 on a john deere 7330
Enjoyed your video. Thanks for sharing.
Take a big roll pin..... Braze a smaller one across one end and use the slot to slip on end of tube...... makes a good tube squeezer
Or get a Valco tube grip dispensing plier.
Warren I really hate the backing plate and how Deere wants you to put the sealant on? I'm like you I've put hundreds of them on
Notice a lot of stuff out there has really high hours, any insight as to why? 10k on a tractor out here in illinois is seen as extrodinarily high.
some hard working hands
You know! When they have a model that most everyone likes,why do they have change? Like the case dozer I told you about. They took away the tilt cab.
Jim Detchon I Agee 100% why do they always have to change something that is proven itself not only reliable but mechanic friendly. It’s a win win ! I guess they call it progress? Lol!
Love the videos Warren.
27:45 i had one guy do that to me and i keep the old parts for scrap and i just took everything back off and returned it to the dealer
Hi
Do you ever take a day off?
Great job !
I wonder why JD uses those hose clamp's? Price or does a robot install?
its pretty common on all most everything now days.
Holy shit 13000 hours
What's the model of electric impact driver you're using?
thanks warren
Plastic impeller, lovely!
You are the best
Great Video warren 👍👍👍
How much did you paied for your texa software??? Is it really that good?? Do use also use or have the service advisor from John deere?
Thanks
Greets from Austria in Europe
It was 7,000 6 years ago. No, I don't have service advisor.😄
@@westerntruckandtractorrepa1353
Ok thats nearly the same price here in Austria .... i saw sometimes the service advisor in our local JD workshop. Fucking great impressive thing. But only for the deeres
Are you self employed ? 🤔
Can imagine that you earn a lot of money with your work and Knowledge.i see sometimes that you have to travell long distances to your repairs. Hope thats paid also (here in Austria you will earn a lot of money with this job when you are good)👍👍
Good Day warren
Warren, isn't it an idea you let all customers come to you're shop? So you would be sure they pay??
Greets from Holland
Jur
My chuckle for the day " shut up man, go away" coming from the guy who is usually so mindful of how he speaks to others... lol lol You should have told him that he needs to" proceed with making sure that his top lip is making full contact with his bottom lip" heheh
I would put a thermostat in it also
ciao vorrei chiederti puoi aiutarmi a capire un problema su un 7810 autopower mi rimane in P. parcheggio
codice di errore UIC 187
The manufactures should put a hose on the drain valve so u can collect it
Is that a 12v ratchet Milwaukee ?
I think you used a whole tube of sealant... The bigger the gob, the better the job.
But it’s hot oil that holds all the rocks together
Patent that coolant gutter.
I am sorry but I do not understand why you would not get payed on their property. It's the machine of them you repair. Isn't it possible to make picture's of you're job, and the machine before you start anyways?????? Greets from the Netherlands
A ton of hours...
That's so funny. Shut up man go away lol
unless joe strippit has already rounded off the bolts.!. and mr. broken bolt was there...
"Joe strippit " Never heard that that's Super funny
Yikes, all that RTV makes me cringe! What a mess it will be for the next guy (you) working on it.
Marching or fighting, it all pays the same...
I want a stand alone John Deere water pump petrol fueled or solar powered or single phase electricity ( 220-260V) with head 40m and suction of dirty water 15m deep, and pump 450m away
👍
Thats more like 13000 hours
Whatever the equipment it all pays the same
you do good work god bless you
Well i'm thinking asphalt is made with diesel fuel, Sand, Rock and heat...
Once asphalt hardens and oil is spilled and left there... It softens the pavement.
Not that it matters though...
Rick O'shay
Asfalt is made of bitumen oil, a Bi- Product of crude oil refining. “Crude oil” is the pure oil coming out of the ground...
And as flat is a mix of bitumen, gravel rock, and a few other ingredients that make it stiff as it get cold, ( as of under 200˚ F)
The filter said 13256
Yeah I know this is an old video but holy crap the amount of people who don’t know anything about the number things they use on a daily basis are part or in whole made from oil and it’s byproducts. It’s not all used for fuel 90+% of the plastic is used too make every phone or iPad or laptop computers but they wouldn’t give up their devices to save the climate. Then the meds that millions if not 100s of millions use daily all the capsules and pill bottles the filler in tablets and millions of other products made with big scary monster oil. So if you ban fossil fuels it would shove the whole world back to the Stone Age.
Had a 250 Cummins in a ready mix truck do the same thing. Scratched our heads for days trying to figure it out. Would only get hot loading.
As far as the guy being shoved I am like you Warren you only get one chance then it is my turn............
When your in the field and you think they might not wana pay it's good to leave something un hooked ((intentionally)) that will grenade the machine but of course if they do pay just tell them you wana do a once over befor you leave to make sure you didn't forget something then hook it back up.
Look at the hours written on that filter, 13256. There's your answer right there my friend.
The guys with the old equipment can afford to pay to fix the equipment because they aren't making payments on it.
I got my ass chewed on for spilling hydraulic oil from a roller on new asphalt by the jobsite foreman, apparently when the inspectors run the sonar over new asphalt different oil can come up as a void in the mat and the state will make you grind it out. Doesnt hurt anything but the pocket book.
I prefer working on older equipment. The company I work for has an average fleet age of 19. The oldest is pushing 30 years old. Can't work on modern equipment if you can't work on the technology it was built on, in my opinion.
could you use that coolint in a gas motoer
13000 hours you are right u cant comeplan
It would be better for the environment if you did a better job of containing engine fluids instead of contaminating the ground.
If you believe that, then you need to rip up every asphalt highway in the country, their primary ingredient is oil and it's laying on top of the ground. You're obviously not a field mechanic and from an urban area.
Look up ethylene glycol, that's what antifreeze is, if you notice in the description it says it's an organic compound.
western truck and tractor repair would you want your dogs to drink that antifreeze you spilled on the ground.?
They are smarter than that.
Cry me a river its obvious you never do any kind of mechanical work do you?
Man i was only watching to see how you got the metal tube out of the top of the pump and you didnt even show it. 🫤
Sounds like it needs the t-stat and a few hoses also .