I am curious on how deep you drilled into your stock in order to install your T-Nut? I purchased a 3/4" Forstner bit and just want to make sure that I get it right. I followed your lead, purchased the ARCA rail from Amazon (fits perfectly!) and am going to install it on my Manners stock on my 452 Varmint. Thank you so much for making this video!!!!!
It's refreshing to see good Ol' Canadian Ingenuity hard at work building these kinds of accessories in place of purchasing them! I'm not against folks that provide a good product like Area 419 does, making money, but in today's screwed up economy, saving money where you can makes a LOT of sense! Well done!
Thank you very much for the kindness. I actually cant believe how much the $60 investment changed the rifles ability so much. It almost seems worth it to go the DIY route to see what one is missing.
Sure do, but I’m in Canada, so the link will be .ca www.amazon.ca/SDENSHI-PU-300-300mm-Release-Tripod/dp/B0827H1MJF?pd_rd_w=DmHtg&content-id=amzn1.sym.799469aa-0a7a-4b73-8d57-8ce8c368b932&pf_rd_p=799469aa-0a7a-4b73-8d57-8ce8c368b932&pf_rd_r=2FJV6WVJ84VEDCFS2H9Q&pd_rd_wg=AsYXp&pd_rd_r=f2275151-ff37-4fb0-8c06-caf3579c575a&pd_rd_i=B0827H1MJF&psc=1&ref_=pd_basp_bia_rpt_ba_s_1_sc
Outstanding to hear! The T nut depth I judged using the factory Manners sling stud hole as a guide. I made sure to account for the “stud” of the T nut ( so it wouldn’t protrude) but if I recall I just set the drill press stop to not push through and then checked little by little as I went. I know the 452 Manners is a little different, so it may not make sense as I describe it!
This is the kinda thing I would look for after seeing it at the range and after weeks of searching finding out it’s all custom! Creative!
I am curious on how deep you drilled into your stock in order to install your T-Nut? I purchased a 3/4" Forstner bit and just want to make sure that I get it right. I followed your lead, purchased the ARCA rail from Amazon (fits perfectly!) and am going to install it on my Manners stock on my 452 Varmint. Thank you so much for making this video!!!!!
It's refreshing to see good Ol' Canadian Ingenuity hard at work building these kinds of accessories in place of purchasing them! I'm not against folks that provide a good product like Area 419 does, making money, but in today's screwed up economy, saving money where you can makes a LOT of sense! Well done!
Thank you very much for the kindness. I actually cant believe how much the $60 investment changed the rifles ability so much. It almost seems worth it to go the DIY route to see what one is missing.
well done, golden hands !
Thank you!
Great and informative. Thank's for sharing.
Make sure you lubricate stainless on stainless threads. Notorious on galling. Otherwise nice build . Great ideas
Does this stock fit in a 455 22 mag?
Thanks pal!
You’re next then?
Do you have a product link for the rail you used
Sure do, but I’m in Canada, so the link will be .ca
www.amazon.ca/SDENSHI-PU-300-300mm-Release-Tripod/dp/B0827H1MJF?pd_rd_w=DmHtg&content-id=amzn1.sym.799469aa-0a7a-4b73-8d57-8ce8c368b932&pf_rd_p=799469aa-0a7a-4b73-8d57-8ce8c368b932&pf_rd_r=2FJV6WVJ84VEDCFS2H9Q&pd_rd_wg=AsYXp&pd_rd_r=f2275151-ff37-4fb0-8c06-caf3579c575a&pd_rd_i=B0827H1MJF&psc=1&ref_=pd_basp_bia_rpt_ba_s_1_sc
Bravo, nice and helpful ! Grazie
Thank you!
Outstanding to hear! The T nut depth I judged using the factory Manners sling stud hole as a guide. I made sure to account for the “stud” of the T nut ( so it wouldn’t protrude) but if I recall I just set the drill press stop to not push through and then checked little by little as I went. I know the 452 Manners is a little different, so it may not make sense as I describe it!
Is the bottom of your forend flat ? Does the Arca rail sit flush against it?
Yes it does. The 455 Manners stock is flatter than the 457s
What rings are you using?
Sportsmatch UK if I recall correctly