CZ P-09C Nocturne Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ม.ค. 2025

ความคิดเห็น • 44

  • @michaelreid2793
    @michaelreid2793 2 หลายเดือนก่อน +8

    Thank you . I have been following this issue since the honest outlaw problem . I really wanted the gun to work right . Thank you for following through ! 😊

    • @maybe5883
      @maybe5883 หลายเดือนก่อน +1

      I bet outlaws issue is optic install related. Or a one off issue. Too many others having no issue. Just bought one yesterday, hoping it makes a great edc unit.

  • @jmaldo1076
    @jmaldo1076 3 วันที่ผ่านมา +1

    Buckeye here,,, Old eyes! Right with you,,,, Nice job. Thanks!

  • @hardcore4476
    @hardcore4476 หลายเดือนก่อน +1

    The prior P-07 had same omega trigger where you could switch between safety or Decocker. You can tell when you shortened the optic screw the ejection pattern looked more consistent and better.

    • @OhioGunRunner
      @OhioGunRunner  หลายเดือนก่อน

      @@hardcore4476 thanks for the clarification I wasn’t sure if the 07 came with the safety.

  • @pulido6974
    @pulido6974 2 หลายเดือนก่อน +3

    1st time watching your videos. Good job, sir..

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน +1

      @@pulido6974 thank you

  • @elvigia7091
    @elvigia7091 3 หลายเดือนก่อน +6

    I recently purchased my P0-9c Nocturne and have fired about 470 shots with no problems at all, without an optic, only with the factory sight. Congratulations Sir, very, very good video, thank you.

    • @OhioGunRunner
      @OhioGunRunner  3 หลายเดือนก่อน +1

      @@elvigia7091 thank you.

  • @RichB804
    @RichB804 2 หลายเดือนก่อน +3

    First time viewer. Enjoyed your video. Seems to be some controversy about optic screws causing issues. I think you proved that to be true. I just picked my nocturne up yesterday. Have not shot it yet. Will try first without an optic. I subscribed and look forward to viewing your future videos.

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน +1

      @@RichB804 thank you

  • @iwasrel0ading138
    @iwasrel0ading138 หลายเดือนก่อน +1

    Thank you wise sir, i was upset after others review and they didn’t try to see what the issue was

    • @OhioGunRunner
      @OhioGunRunner  หลายเดือนก่อน

      @@iwasrel0ading138 your welcome, my guess is most people don’t know what to do.

  • @Jeff-xn1ew
    @Jeff-xn1ew 2 หลายเดือนก่อน +1

    The p07 had the same trigger safety option as the 09c. I have 2 p07 models with the omega trigger. Nice shooters.

  • @ThePatriotsway
    @ThePatriotsway 10 วันที่ผ่านมา

    Excellent work 👍🏻

  • @j.m.youngquist419
    @j.m.youngquist419 2 หลายเดือนก่อน +2

    The only thing that I don't like about mine is the lanyard loop. Why did they add the lanyard loop?

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน

      @@j.m.youngquist419 for police contracts that require it. Somebody has a fix for that. Can’t remember the name of the company google it.

  • @DirtyHarry-lo8fr
    @DirtyHarry-lo8fr 2 หลายเดือนก่อน +2

    Excellent review

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน

      @@DirtyHarry-lo8fr thank you

  • @christopherparker415
    @christopherparker415 2 หลายเดือนก่อน +2

    Nice vid. Just got my P 09 F and loving it. No optic yet though. What holster are you running?

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน +2

      @@christopherparker415 thank you. I make my own holsters.

  • @Erodz76
    @Erodz76 หลายเดือนก่อน +1

    Good Job sir.

    • @OhioGunRunner
      @OhioGunRunner  หลายเดือนก่อน +1

      @@Erodz76 thank you.

  • @quiquedaboub
    @quiquedaboub หลายเดือนก่อน +1

    Hello, Thank you for sharing your experience, I just purchased one. Please could you tell me which model of CAT X PRO Multi-Reticle Duty Red Dot fits this CZ P09 C NOCTURNE weapon? And what other brands do you recommend?

    • @OhioGunRunner
      @OhioGunRunner  หลายเดือนก่อน +1

      @@quiquedaboub the Cat X Pro is RMSC and direct mounts no plate needed.

    • @quiquedaboub
      @quiquedaboub หลายเดือนก่อน +1

      @@OhioGunRunner Thanks a lot!

    • @davidepperson6560
      @davidepperson6560 วันที่ผ่านมา +1

      I just got mine 2 weeks ago and I put a holsun 507c red dot and have over 600 rounds already and no problems.

  • @alainaragon3942
    @alainaragon3942 2 หลายเดือนก่อน

    Sir what is your holster? Where did you buy it?

  • @JoseNunya
    @JoseNunya 2 หลายเดือนก่อน +1

    Are these 09C's still using CZ's inside rail on the slides ??

  • @vincentlr4129
    @vincentlr4129 2 หลายเดือนก่อน +1

    Good job 💪

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน

      @@vincentlr4129 thank you

  • @quiquedaboub
    @quiquedaboub หลายเดือนก่อน

    Hello, I have a question, do you know if the SWAMPFOX SENTINEL II 3 MOA RED DOT 1X20 SNL2120-RM RMSc scope fits the CZ 09 C Nocturne? Please.

    • @OhioGunRunner
      @OhioGunRunner  หลายเดือนก่อน +1

      @@quiquedaboub yes it is milled for any RMSC optic.

    • @quiquedaboub
      @quiquedaboub หลายเดือนก่อน +1

      @@OhioGunRunner Thanks!

  • @nickukasiewicz3367
    @nickukasiewicz3367 หลายเดือนก่อน

    Is that a vedder p07 holster youre using? Some p07 holsters dont work with the nocturne according to the internet. I couldnt find any info if the vedder p07 was compatable and ofcourse i find this video a day after ordering a different holster.

    • @nickukasiewicz3367
      @nickukasiewicz3367 หลายเดือนก่อน +1

      nvm i saw you make your own. very cool, very resourcefull. gr8 video!

    • @OhioGunRunner
      @OhioGunRunner  หลายเดือนก่อน

      @@nickukasiewicz3367 thank you. Yes sir that’s a Gun Runner holster.

  • @kwisatzhaderach1458
    @kwisatzhaderach1458 2 หลายเดือนก่อน +2

    It's sad that a mere optional screw was not tested by CZ in the package offered and caused PR damage like Sig had with the P320 launch.

    • @OhioGunRunner
      @OhioGunRunner  2 หลายเดือนก่อน +6

      @@kwisatzhaderach1458 no sir CZ doesn’t provide screws they were provide by the optics company

  • @jboss007
    @jboss007 3 หลายเดือนก่อน +1

    Sir good video!
    The thread depth is 6mm. There is no part of the extractor visible in the hole or any other part that the screw could hit. The screw that holds the cover plate has a thread length of 4mm. The 11mm long screw has a thread length below the red dot of 3.8mm. So why should there be a problem with a screw that goes into the hole a shorter length than the one that held the cover plate and the gun works fine without optics. This fairy tale with screws is just a placebo.

    • @davidpacitti8942
      @davidpacitti8942 2 หลายเดือนก่อน +2

      I understand. So it could be a coincidence. Or perhaps there is some mechanical malfunction being caused by the longer screw? Perhaps it is making it protrude further down?
      I don’t know. But for the additional 50 rounds that he ran there were no malfunctions…
      Only additional rounds through the gun would need to confirm that it is really resolved.

    • @jboss007
      @jboss007 2 หลายเดือนก่อน

      @@davidpacitti8942 It's a coincidence. The hole has a solid bottom and it is not possible for the screw to hit anything even on the sides. My P09c without optics out of the box without problems with reload and after installing Voortex Defender with M4x11mm screws again without problems.