VW Polo 9N power steering fault
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- VW Polo 9N power steering fault with yellow power steering light on. This VW polo had no power steering and was very heavy displaying a yellow steering wheel light on the instument cluster.
Join the SimplyDiag Community for free at www.simplydiag.net
Subscribe and get more great videos weekly
/ @rmautodiag
Picoscope 2 channel scope
amzn.to/2C8MeYt
Picoscope 4 channel scope
amzn.to/3gvFWRB
Uni-T multimeter
amzn.to/3bSDT7J
decade/resistance box
amzn.to/3jWds5u
amzn.to/326vrjj
rmautodiag.com
home
/ rmautodiag
Disclaimer:
Due to factors beyond the control of RMAutodiag, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. RMAutodiag assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. RMAutodiag recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RMAutodiag, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
As an Amazon associate, i earn from qualifying purchaces.
great video my son has a polo 9N 2002 and without guys like you we would be changing so many things as a fault and found a fuse cracked could do a repair
Thank you!! You've just helped me fix my Polo steering 👍😁 (was the fuse on top of the battery)
Glad I could help. Thanks for the Comment 👍
Cheers for the video. Got me out of trouble when F7 blew on me on the Autobahn. I wouldn't have known where to look. Haynes Manual was useless
My friend has the same problem, but the warning is not always active, I turn off the car and the error disappears, but after a while it comes back on... I don't even want to imagine that the bomb is burned... I'll see if it's the same wire as yours... a hug🤗
I just charged my battery up and the fault light was gone. New battery would also resolve this issue.
S1 bro
I just bought a new one and its the same , don't know wtf to do
@@robbyyy69 Hi is the battery fully charged ? , please check. Just in case.
@mahendrapatel9915 i just did , it is fully charged , any other options?
Had a similar issue last year, however the crankcase breather box was clogged/faulty which was blowing the same fuse with power steering issue like yours all sorted now
How much did it cost to sort
@@gang-gang8325 I did it myself had to go with a genuine VW part as the patent parts didn’t quite fit. Was about £150 for the box
In my case, all the fuses are fine... New battery... It turns out that when I drive the vw polo 9n3 1.2 12v, the airbag, steering, abs light comes on, the 3 lights stay on, but if I turn off the engine they disappear, I can now drive normally, (strange) I managed to get an error code but, only when this happens, because if you do a scanner test there will be no errors, only when the light is on... error P0600 Serial Communication Link , does anyone have information? thanks
Hi thank you I found two blown fuses I changed but do you have any idea why they would blow? (50A under bonnet and 15 in the fuse box for the controller)
Bad pump module on the small fuse.
Bad pump if it blows mega (or a wire short)
When i had the light, it was the sensor at the bottom of the steering column which was shorting out against water which was seeping in through a seal in the rack. Had to replace the rack as its not serviceable.
Is that power steering not working or very hard before you fix it
Very explanatory & helpful, thank you.
Hello got same issue on same car. Local garage is stumped. Can you please assist?
My one all the dues are good but the fuse u changed was 7.5 instead of 5, is there a good chance cuz of that the power stealing pump blew ?
The fuse was 7.5 or 5 amp depending on model type and age.
Great diagnosis 👍👍
Thanks for your comment
I have an issue on my 08 9N, steering is really stiff at the min, my steering has locked twice when trying to pull out of my parking space at home. Also my handbrake and ABS light come on and been now and again.. lights flicker, dash lights flicker sometimes. Anybody know a possible fix and cost ££, Thanks
Same problem
I have the same problems. What can I do? Please help. Thanks
Any fix for this?
Iv got no warning lights but my steering has become very heavy , Iv check fuses but as I got no warning light im kinda scratching my head
Did you find any solution
fuse break down
Hello mate I have seat bocanegra 1.4 same issue with power steering and also abs lights are on too , checked the fuse all good that might be motor?
Have you checked the blade fuse? These are mostly on top of the battery or in the cover of it. Loosen the nuts there to see if they break apart. If they break apart, they were already broken and if not they are good and the problem is with something else.
Can the seatbelts be problem
I've a 2017 2k scanner ( very similar Snap-on ); with no comms steering assist, fuses good ( I'm a car trader not a mechanic with a good scanner ); I've got a cheap pump £30. How do you code these after replacement , thanks !!!
No need to code. Just match part number
Check the alternator
Thanks
Hi mate I have a 2007 polo I changed the power steering pump but my mechanic said it needs to be calibrated or something to the car using a VAG computer I currently get error code 01309
As in the video - fault code 01309 is no communication from the power steering module, usually because of the blown 7.5A fuse #7 in the side of the dash
Sir, what diagnose program/ hardware you use?
thanks
Amazing work 👏💯
Good job 👍
Thanks for the support
niceone great video
Thanks for the support
👍
Thanks for the support
❤
😂😂