Y&H Solar Charge Controller SY Series MPPT 60A/80A/100A Operation Demonstration
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2023
- This is a multifunctional LCD display solar controller with a clock display function and 7 operating modes. The 7 operating modes are charging mode, light control mode, light control + delay control mode, general control mode, manual control mode, timing control mode and test mode. The test mode is only suitable for factory testing.
The charge control function is not limited to any mode restrictions, and charges as soon as the charging conditions are met.
The discharge control function is different according to different control modes. In the case of no fault, the specific instructions are as follows:
1. Charging mode: under any conditions, it cannot be discharged.
2. Light control mode: When the controller detects that it is night, it will start the discharge with a delay of 10 minutes; when it detects that it is daytime, it will stop the discharge with a delay of 10 minutes.
3. Light control + delay control mode: When the controller detects that it is night, the discharge will be delayed for 10 minutes, and the countdown will begin. When the timer is 0, the discharge will stop. The delay time is up to 23:59.
4. General control mode: In the case of no fault, it will always maintain the discharge state.
5. Manual control mode: use "▼" to start discharge or stop discharge.
6. Timing control mode: turn on the discharge at a fixed time, and turn off the discharge at a fixed time.
7. T est: Same as light control + delay control mode, but the delay time is less than 10 minutes.
8. After the controller is under low-voltage protection, if you still need to discharge, you can press and hold the "▼" button for 5 seconds to still output, but you can only stop discharging manually. Note that this function may damage the battery, please use it with caution!
Instructions:
(1)
"▲" value and mode adjustment button;
"■" set/confirm button;
"▼" shift and forced start/stop button.
(2) Time setting
Immediately after power-on, it enters the time setting state, the load output state and the first digit of the 4-digit numerical display in each parameter display area (most
Left one) flashes, indicating that this digit can be adjusted, press "▲" to adjust the value. To adjust other digits, press "▼" to shift and adjust
all. If you need to adjust the time again, you can press and hold "■" for 5 seconds to enter the time setting state.
(3) Mode adjustment
Press "■", the current control mode will flash, then press "▲" to call out the desired control mode, and then press "■" to enter
OK to confirm.
(4) Delay stop time adjustment of light control start + delay stop control mode
When the "Light Control and delay" control mode is selected and confirmed, the delay stop time parameter will pop up automatically, and the operator can
The method is the same as the time setting operation, the load output status and each parameter display area will display "Time OFF", after the adjustment is completed, press
Press "■" to return to display mode. If you need to modify the delay stop time parameter again, directly press "■" twice to enter the delay stop time parameter.
stop time parameter adjustment.
(5) Adjustment of start time and stop time of timing control mode
When the "Timing" control mode is selected and confirmed, the start time parameter, operation method and time setting operation will pop up automatically
Similarly, "Time ON" will be displayed in the load output status and each parameter display area. After adjusting the start time, press "■" to automatically
Automatically enter the stop time parameter adjustment, the load output status and each parameter display area will display "Time OFF", after the adjustment is completed, press
Press "■" to return to display mode.
Product Links:
www.yonghuisolar.com/products... - แนวปฏิบัติและการใช้ชีวิต
Is it compatible with Lifepo4 ? 24v 8s.
I can seem to find a mode where it simply disconnects the load if the battery voltage gets too low and reconnects the load when the battery voltage rises to a level?
i used this solar charged controller for almost a year now , its not an mppt but its better than pwm , its cheaper than other controller, its cost 1000 philippine pesos for the 100 amperes solar charged controller
It is a PWM, I have been checking the input with an Oscilloscope, all it does is delay the PWM to make it look like it is working out the max power.
the input is 48v and get the output load 12v how it is?
Fake mppt
Why?
@@user-up1tc7qg1x There is no internal pulse transformer. MPPT must have it
@@nam7a8c55 tnx
dont know whats inside but mine stopped working at a 5v charge on 12v cells. it just flashes the screen intermitently.
@@luminousfractal420 Isso pq ele é pwm inferior, para resolver isso a bateria tem que ter a mesma tensão das placas.
Até o controlador azul é melhor que ele.
Mantap.. ❤
Why if it if showing pault
how to reset?
Hi I have had this controller for a while and it's been great but today started flashing 60 in the middle box and cutting out then away again there is no way 60 amp is coming in it does this even with the panels turned off
ANY IDEAS much appreciated 👍
mines doing that with the 80A symbol on the display. cells show a 5v charge. noticed the power supply blinking so maybe it needs an 80A power supply..which is insane.
Нагрелся, надо поставить вентилятор снизу...
У меня уже год работает, самое большое было 76 ампер. Это лучший за свои деньги
this is PWM controller, not MPPT, no toroidal choke coils inside
Hello, it is a high quality compatible MPPT + PWM solar controller, not 100% pure MPPT.
Da ist nichts mit MPPT ohne Spule ist das physikalisch nicht möglich.@@yonghuisolar
You're kidding me so I spent all this money on something that isn't really an mppt, that sucks
Bullet dodged thanks.
Hazle una prueba con 100amperios?
Comprei esse controlador, e ele é mppt não é pwm
Aküyü sarj etmiyor ayarlarıni yapamadim
Not recommended to all.
Это не mppt,,и не надо верить рекламе,улучшиный pvm и не больше,нет здесь никаких алгоритмов mppt,и не может быть
Много других, которые до ста ампер в 12 вольтовой системе?