Suzuki gs500 exhaust change, slip on, no exhaust. Sound, test, noise test
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- hi guys, if this video helps you out at all or you just enjoy watching then please feel free to tip enough to get a hot drink. The channel does cost a fair few pound to run so all tips would go towards continuing the vids and making them better.
thanks
paypal.me/moto...
In this video I literally hack away at the old exhaust and put the slip on can onto it. Sounds go but not running great at the moment. Possibly needs up jetting.
Please subscribe.
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
If your watching this video please support the channel and subscribe
Hi motorcycle rescuer been subscribed to your self for a while and luv the videos, wanted to get some advise if possible just brought a bit of a barn find suzuki GS 500 sat for 9 years any advise on main things to check please? Keep up the good work mate and main thanks for great content. Ian
@@ianbarclay6449 hi Ian, wow 9 years, the main things will be check that the petrol tank has no rust and flush out the old fuel, clean the carbs well to get rid of any old fuel that has gummed them up. A basic service I.e oil, oil filter and air filter, spark plug check and change if needed.
And finally the brakes will need a service including new dot 4 fluid.
The bike will need a new battery aswell.
I hope this gives you an idea of what to do and please do ask for any advice you want.
Thanks
@@motorcyclerescuer o brillaint thanks for the advise, I might very well be back in contact again 😂. I say it's a barn find more dry stored in garage for 9 years with every put on top of it. But to good a deal to miss out on, do the lifters every need a adjusting at all I belive it's on 30k? Many thanks again.
@@ianbarclay6449 you won't need to worry about the clearances yet until its up and running and serviced. They should be fine but we won't know until you hear the engine.
@@motorcyclerescuer ye fingers crossed all is well with it. Many thanks again and will keep you posted.
I'm actually liking these gs500s keep up the good work and keep safe pal
noce sound! Deep and not so noisy... is elegant :D
It did sound nice yes. It worked very well in the end.
Thanks for watching and please subscribe
Great couple of vids keep em coming,your long clutch lever is due to the switches and clutch hanger need to switch positions check the parts bike for reference maybe? 👍🏻
I don't think I switched them around mate. It's because the bars are shorter then the originals. I'll order some shorty levers if the bike runs better tomorrow. I think I'm going to put the original exhaust back on it. I'm not keen on the new one.
Thanks
I like the look of the new can! Probably right about the upjet though. Shame about the other GS! ...... already sent my entry email let me know if I forgot anything 🤞🏼.
Saw yours already mate. I like the look but can't be bothered messing with jetting. I may put the second original back on tomorrow. Best to be as standard and original as possible with the added bonus of the high rise bars.
motorcycle rescuer : yeah very true, bike still looks great love the gold levers too 👍🏼
@@woods146 they didn't work in the end. I'll order a new set for next week
motorcycle rescuer : yeah I saw that is a shame but definitely go for the gold ones they looked good against the red. Do you have a link to the chap you get them from?
@@woods146 if you write jakecorb into ebay his page comes up. He's the guy in the video today. He sells the parts. Be sure they fit though as the ones I got today didnt
I've yet to come across a GS500E that sounds good.
Yes it sounded great this one. Ran well too
um.. on the exhaust, isn't that thing the sound suppressor that goes into the exit side? Also why didn't you just use a step-down joint so it fit correctly without using all that paste stuff?... Also are you not using the choke on cold start up?
No it's not, it is a step down I was using but I bought the wrong one. I was always using the origins exhaust anyway and only did this to show people the sound and how to do it. So it went back to an ori exhaust. I had 2 anyway.
But yes a proper step down would have made life easier.
Also these bikes don't sound very god with louder exhausts in my opinion.
Thanks for watching and commenting. Please sub if you havnt done so.
Did you break the other GS and if so are the engine bars for sale at all please?
Great video by the way.
Sorry Marc these vids are 3 years old mate so parts are long gone. If it was a recent vid you would have been welcome to them.
@@motorcyclerescuer thanks for quick reply never mind it was worth a try after 3 years 😂
Buying some new one's £87.60 lol
Worth the new ones. Old ones are always scratched up lol
Love it
Hi, I can see they are both GS 500e but why do they have different stearing handle position. Im confused . 🙏
I put renthal bars on one as its much nicer to ride like that.
Did you have to rejet the carbs change air filter etc...? Looking to do the same on mine
If you change the exhaust and put a high flow filter in then it would be best to upjet by 4 on the main jet. It's fairly quick and easy to do. I do them in minutes now. I can't remember what the main jets are now so you may have to check and then order 4 higher. Otherwise it will be running lean which isn't great for the bike.
I went back to stock on this in the end.
@@motorcyclerescuer thanks for the reply I thought as much, thinking of going cafe racer/ street fighter on mine love your vids 👊🏽
Sounds like a plan mate. They make nice cafes and fighters so worth doing.
Dude, that lever comes out so far because on the left if the bike the brake lever is the wrong side of the controls.
Not sure what you mean?
@@motorcyclerescuer On the left handle bar. At the moment from the outside in, you have it bar grip, then brake lever clamp, then indicator controls. It should be, bar grip, indicator controls, then brake lever clamp :)
Oh I see, I think I only mocked it up at that time. It would have been good to go when I had finished. Its a old vid so I don't remember really lol.
Thanks for watching though and hopefully you will enjoy some of the more recent vids.
Is it possible to get an after-martket to the OEM pattern ?..........and is the OEM silencer welded to the pipe as one system ?
Aftermarket down pipes? Yes definitely.
I can't remember if the original end pipe is a 1 piece. I feel like it was yes. So to put a aftermarket end can on you would cut the old silencer off and weld the new one.
About to purchase this bike(suzuki gs 2009), it will be my first, it has 26k miles the seller is selling it for 2.4k. Is this a good choice to buy ? I don’t really know about bikes. Thank you
2,400 US dollars
Hi Turbo, its hard to tell really, these are cheap bikes in the UK. The 2009 model was pretty good though and a 600 or 650 engine I believe?
Basically do all the checks, make sure it looks clean, tyres are good, chain and sprockets are good and take it for a good 15 to 20 minutes ride before paying for it.
If it feels good to you then it will be. Any funny engine noises then don't bother buying, it has to sound smooth.
Sorry I'm not more help.
Good luck with finding a buying a bike. Suzuki bikes are strong over all.
motorcycle rescuer thanks for the feedback ! I’ll keep all these things in mind.
What a hacky job 😅 if it works and you are happy thats fine tho.
Of course it works
I want to put a Sc project escape.... I have to do something no carbs? I habe the original air filter...
Thanks fir r answer from Ecuador 🦾🦾🦾🦾
No problem. Please subscribe if you havnt already done so.
Thanks
How many mm does the exhaust pipe have?
No idea I'm afraid.
I miss this intro music lol.
Is it different? I'll have a look lol.
Lol I just re watched it. Its abit bland
@@motorcyclerescuer Reminds me of lockdown, had your channel on the whole time! 😂
Lockdown was so crazy as I was working big time but still had to get to the garage to release some stress.
@@motorcyclerescuer Ahh Yeahh I can imagine!, had the whole time offf, was pretty testing, but come accross your channel right at the beginning, watching ever since!, loving the content!.
11:08 .. larve on the pipe?
No idea mate. Can't remember lol.
Thanks for watching and please subscribe
Is it possible to drill more holes in the baffle to get a half way house between baffle and straight through or is it not work the effort? Looks good though!
I noticed that there was 1 more option which was to have the baffle in but take a gromit out of it. I will try that tomorrow. If I'm being honest I don't like the new exhaust and am tempted to put the second original back on. I don't want to mess with up jetting and stuff really.
motorcycle rescuer kinda with you on the idea but I suppose it’s all about the buyer!
What exhaust is that?
One is the original and the other is a cheap slip on mate from ebay.
Thanks for watching and please subscribe
What echaust did you yse i eanna do the same for mine??
Hi Dodge, just a cheap one that I found on ebay mate.
Bad carburetor
No, bad engine in the end. I swapped the carbs over from the other bike.
Thanks for watching and please subscribe