Homemade faceting machine 6. Experimental handpiece 2. Project suitable for learning gemstone faceting . Handpiece quite good is made of a little scrap material ...
Stunning hand piece. I am a Toolmaker, but with early hand tremors. I don't want sympathy but can you share some basic sizes and materials used. I am an excellent Wood and Stone letter engraver. My last before retiring before I have to is to do faceting. I have 200 cts of Garnet, tasvsorite and rough green stones. I'm joining a Lapiday club to learn, but as a Toolmaker who enjoys using old techniques in doing one off unusual repairs...clients have not had success elsewhere...I am referred as a last resort...he thinks differently !!! They say..I think the way a craftsman thinks. I also do Laser Welding so I have fine hand motor skills...but a developing tremor in my left hand...not the right. Can you help me out as one craftsman to another. I wish to make a celebration of life, study, success overseas in Architecture for my God Daughter. A ring with stones that are important to here. I wish to create that before I can't blow my nose anymore. Dementia when it sets in will spare me from remembering I didn't complete the task. Regards Mike
@@bustergonad3975 Hi Mike I'm sorry to hear you have health problems, my health is even worse, I will not list my problems, I just want positive views of the future. That's why we chose a wonderful hobby - gems, a world of special beauty. Feel free to contact me on FB facebook.com/liburnidesign or at liburni.design@gmail.com I don’t have blueprints because I did everything from the material available in the workshop. Aluminum, wood, iron and the main dimensions are 18 x 11.5 cm. My experimental handpiece 1 is even easier to make and provides quite good features. I'll make some more super simple ones soon .... regards
You are awesome sir!! You make it looks simple and doable. I only make cab but after watching your channel I wanna learn to do faceting too. I'll make one of these in the future. Thanks for the idea sir.
Thanks for the compliments and for watching the video. I am not selling, it was made only as an experiment, like two other experimental handpieces. They served me well for learning to cut gems. Then it was easy for me to switch to the diamond tang professional tool ....
I use red wax. It is a wax that is also used for sealing doors or boxes. It is hard, brittle and has a higher temperature than other waxes. You can find it on ebay to buy under the name "dop wax". It comes in different colors that indicate the melting temperature, and they are all based on shellac. Thank you very much for following my channel. Best regards Predrag
Sorry but this was just an experimental model, but you can draw the index yourself as you wish in one of the programs "CorelDraw" or similar. You can also use different materials and sizes. One day I want to make a Thai handpiece that has no index at all.Thanks for watching and commenting.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Hey! Nice job my friend! You have only basic tools, but have an idea, and you made it! Congratulations!
thank you very much, that the idea was as simple as possible, I have some more plans for simple handpieces that I will make in the next period
Stunning hand piece. I am a Toolmaker, but with early hand tremors. I don't want sympathy but can you share some basic sizes and materials used. I am an excellent Wood and Stone letter engraver. My last before retiring before I have to is to do faceting. I have 200 cts of Garnet, tasvsorite and rough green stones. I'm joining a Lapiday club to learn, but as a Toolmaker who enjoys using old techniques in doing one off unusual repairs...clients have not had success elsewhere...I am referred as a last resort...he thinks differently !!! They say..I think the way a craftsman thinks. I also do Laser Welding so I have fine hand motor skills...but a developing tremor in my left hand...not the right. Can you help me out as one craftsman to another. I wish to make a celebration of life, study, success overseas in Architecture for my God Daughter. A ring with stones that are important to here. I wish to create that before I can't blow my nose anymore. Dementia when it sets in will spare me from remembering I didn't complete the task.
Regards
Mike
@@bustergonad3975 Hi Mike
I'm sorry to hear you have health problems, my health is even worse,
I will not list my problems, I just want positive views of the future.
That's why we chose a wonderful hobby - gems, a world of special beauty. Feel free to contact me on FB
facebook.com/liburnidesign or at liburni.design@gmail.com
I don’t have blueprints because I did everything from the material available in the workshop.
Aluminum, wood, iron and the main dimensions are 18 x 11.5 cm.
My experimental handpiece 1 is even easier to make and provides quite good features.
I'll make some more super simple ones soon .... regards
You are awesome sir!! You make it looks simple and doable. I only make cab but after watching your channel I wanna learn to do faceting too. I'll make one of these in the future. Thanks for the idea sir.
thanks
Muito top amigo parabéns pelo seu trabalho muito interessante mesmo hein like
very nice idea Thnks for sharing this information sir.
thanks
@@Liburni
I need this
Great...!!! 👍👍👍
thanks Ade
good job
Cool..!
Gracias.gracias.gracias me alludo muchisimooooo
Parece ótimo!
thanks
Show 👏👏👏
Nice job!
thanks
Good Job
thanks
mantab bro 👍
💯
Well done.
Cliff thank you very much
Best sir .. For many, you can sell, it's hard to get this holder...how much you sell..
Thanks for the compliments and for watching the video. I am not selling, it was made only as an experiment, like two other experimental handpieces. They served me well for learning to cut gems. Then it was easy for me to switch to the diamond tang professional tool ....
Hello you are very talented and I wonder that you made it.
Do you have any idea for making a slicing machine?
Thank you very much 🙏
thank you very much, I hope my plan is to build a saw for stone but in the summer, ordinary for cutting smaller pieces. thanks for watching
@@Liburni thanks a lot🙌
Works ;)
of course it works :) thanks for watching
i made 95% of those and it goes well. im stuck at those spring lock for the index gear, do you have any direction how to make it? thanks in advance
Jonathan I made it from a piece of aluminum, if you give me a contact I can send you a few more photos.... liburni.design@gmail.com
what is the name of the wax sir that u use in ur dop stick..im ur subscriber have a good day ..thank u for yur reply
I use red wax. It is a wax that is also used for sealing doors or boxes. It is hard, brittle and has a higher temperature than other waxes. You can find it on ebay to buy under the name "dop wax". It comes in different colors that indicate the melting temperature, and they are all based on shellac. Thank you very much for following my channel. Best regards Predrag
@@Liburni thank u very much idol..
@@sarisaringkalikottv9516 Thank you for the kind words.
Nice sir
thanks
Boa noite amigo Quanto custa
Wellington Bomfim , not for sale, I made only one piece for an experiment, thanks ...
NICE HAND MADE tool 📏😵 WOOW ❗🙋👍
thanks
Teacher good day ...Can you make lifting plate for the faceting arm...
of course it can be done, but as this is just an experimental model then I adjusted the height by laying the boards and so I got different heights
@@Liburni tank very mush
Can I ask for a schematic diagram please. thank you very much and sorry if my english is not good.
Hello
I ask if you could send other index 32, 64, 72, 74, 80,88,120
Ola Pergunto se poderia enviar outros index 32, 64, 72, 74 ,80,88,120
73s
Sorry but this was just an experimental model, but you can draw the index yourself as you wish in one of the programs "CorelDraw" or similar. You can also use different materials and sizes. One day I want to make a Thai handpiece that has no index at all.Thanks for watching and commenting.
Kalau pesen brapa itu om. 🙏
sorry, it's not for sale, it's just one piece made for experiment
Price
NFS Not For Sale
Maestro falta el plato asensor...para que se siente el braso facetador...gracias
I'm sorry, I didn't understand you well, what's missing?(falta el plato asensor)?
Si falta el plato asendor
Bayım bana ölçüleri göndere bilirmisiniz.
Sorry, but I built this experimental handpiece without a blueprint
Facet. How much?
Sorry, it's not for sale, I made it as an experiment, just one piece.
@@Liburni
I wanted to get information from you about where I can get the facet arm.
@@Liburni
Do you know how much facet processing cost?
Price
Sir, I want to buy this Tool.
What is the price of this? And can you teach me to make this Tool?
@@mohsinali1269 This is not for sale, it is experimental