Darkglass Suite connects to my X Ultra. However, the cabs and mics do not appear in the chain at the top of the screen. There is also no sound change when the cab sim button on the pedal is used. Please help
Question: the cab sims only work when using DI out, correct? If I plug my pedal with 1/4" in and outs, I am only getting the standard signal from the pedal itself, not the cab sims?
Can we activate or deactivate the noise gate per preset? I don't want any noise gate on my lower gain setting but on higher gain ones it can be really useful.
Are these impulses just cab sims ? I would have thought an IR would be the whole set up, an amp plus cab. If not then is the phrase impulse and cab sim just being used interchangeably here ? When they can mean diff things
Well, the problem is.. why my B7K Ultra v2 is not saving the cabinet I set? When i change it in Suite it sounds the same... tried v4.5 and 4.6. After Suite restart, it's showing the old cabinet
Try selecting a microphone after loading the cabinet, if you're not getting the green successfully loaded banner at the top nothing changed yet. After loading a cabinet I don't get any change either until I select a mic.
How do you change the 6 band eq on the app? The other one is the generic? Also is preset D,E,F 3 additional presets we can load up? This was really helpful, so if you use presets D,E,F can you still access the tuner, and the other options that require pressing both switches?
no matter the computer I connect to usb, the the amp is not recognized as a device. as if nothing is connected. Switched usb cords and still nothing? any suggestions? Is it a lemon?
Hey! I'm so sorry to hear you're experiencing problems with your Suite. Could you please send us an email at support@darkglass.com? We'll assist you in no time!!
Yes! The blue LEDs correspond to the Omega drive channel of the amplifier. In order to toggle it, the Super Intelligent footswitch is required or a MIDI footswitch controller to engage/assign a preset-program with the Omega engine.
Yes! All of our current products having the cabinet simulation feature available, will work the same way with the cabinet and microphone selection of the Suite.
On my computer the "fetch IR" go on the microphone logo so I can't select differents positions, I need to use phone for that. And when I click on microphone logo i need to go higher where the mic logo isn't to click on it
Please contact us at our support email with a screenshot of the issue in order to determine the cause of it and help you sort this out. It could probably happen due to the resolution and scaling used in your system.
VERY helpful! Just received my Infinity today and, frankly, I'm a dog looking at a watch. I think I understand much better now - THANKS!
Just ordered the Photon!
Darkglass Suite connects to my X Ultra. However, the cabs and mics do not appear in the chain at the top of the screen. There is also no sound change when the cab sim button on the pedal is used. Please help
Can you send us an email to support@darkglass.com? We will help you in no time!
Thanks Bro, can't wait to get going on mine..
Question: the cab sims only work when using DI out, correct? If I plug my pedal with 1/4" in and outs, I am only getting the standard signal from the pedal itself, not the cab sims?
Can we activate or deactivate the noise gate per preset?
I don't want any noise gate on my lower gain setting but on higher gain ones it can be really useful.
What is the maximum IR length, bit depth and frequency that can be used with Element?
Can you explain to me why Spotify and TH-cam are on the Suite?🙏🙏
I have a secondhand B7KUv2...there doesn't seem to be any IRs loaded on it.
I have only the android version because I run Ubuntu Studio. It looks like I can not load 3rd party IR's from the android app. Is this correct?
Hi How come my darkglass suite dosn`t show the presets i got the alpha omega ultra
Do you know if the b7k ultra v2 comes with factory ir’s ?
Are these impulses just cab sims ? I would have thought an IR would be the whole set up, an amp plus cab. If not then is the phrase impulse and cab sim just being used interchangeably here ? When they can mean diff things
Well, the problem is..
why my B7K Ultra v2 is not saving the cabinet I set?
When i change it in Suite it sounds the same... tried v4.5 and 4.6. After Suite restart, it's showing the old cabinet
Try selecting a microphone after loading the cabinet, if you're not getting the green successfully loaded banner at the top nothing changed yet. After loading a cabinet I don't get any change either until I select a mic.
Do i need to connect an interface to start the whole thing or i need a darkglass processor to start ?
You just need to connect your pedal, amplifier, or combo to your computer via USB and open the Darkglass Suite!
Hey, can this latest firmware updates allows us to add compressor in the chain and noisegate for the darkglass element?
The current firmware only allows you to add a Noise Suppressor, tube power amp simulations, cabsim and EQ.
How do you change the 6 band eq on the app? The other one is the generic? Also is preset D,E,F 3 additional presets we can load up? This was really helpful, so if you use presets D,E,F can you still access the tuner, and the other options that require pressing both switches?
It seems we can only load the D E F by cellphone or PC.
@@孙川-h7p midi controller can assign D E and F
Please explain but for the daskglass b7k ultra v2
no matter the computer I connect to usb, the the amp is not recognized as a device. as if nothing is connected. Switched usb cords and still nothing? any suggestions? Is it a lemon?
Hey! I'm so sorry to hear you're experiencing problems with your Suite. Could you please send us an email at support@darkglass.com? We'll assist you in no time!!
@@darkglasselectronics will do, thank you
what is your favorite darkglass pedal? do you recommend the photon or infinity? or do you prefer the ultra versions?
Adam
X7 would be a good starting pedal. Or B7K
Is it possible to import other users presets from the cloud?
Currently the preset code is required to be shared and pasted on the import menu. Stay tuned for the next updates of the Suite :)
@@darkglasselectronics thanks so much
Is it possible to change the led lights on the Alpha Omega 900 to blue?
Yes! The blue LEDs correspond to the Omega drive channel of the amplifier. In order to toggle it, the Super Intelligent footswitch is required or a MIDI footswitch controller to engage/assign a preset-program with the Omega engine.
Can I do this with the Alpha Omega 900 head w/ the smart intelligent foot switch?
If it has a USB port then yes. i have the 500 and i can use the editor.
Yes! All of our current products having the cabinet simulation feature available, will work the same way with the cabinet and microphone selection of the Suite.
I just change my AOU for the Photon, and the Photon are a real gaz factory 😅 Wow not easy for understand ....
I wish I could blend the IR in rather than have it at 100% in the signal path
On my computer the "fetch IR" go on the microphone logo so I can't select differents positions, I need to use phone for that. And when I click on microphone logo i need to go higher where the mic logo isn't to click on it
Please contact us at our support email with a screenshot of the issue in order to determine the cause of it and help you sort this out. It could probably happen due to the resolution and scaling used in your system.
@@darkglasselectronics I have a 16,5" screen with standard 1920x1080px
Ačiū chebra
Is the noise gate doable on a x ultra?
i dont think so, the x ultra isnt programmable....
@@labassproject2897 The Noise Suppressor is only available on the Programmable pedals!
Sorry mate but I literally couldn't understand half of what you said, thus rendering this explanation video kind of useless
Pointless comment! Perhaps, you need to upgrade your headphone.
How do i update the firmware on the element?
You can update it from the Suite by clicking on the settings (left bar) and then clicking on your Firmware version.