How to replace Sony Xperia Z3 Compact LCD Screen? - Repair Tutorial
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- OEM LCD Screen Assembly Replacement for Sony Xperia Z3 Compact ：zegsu.com/s/di81u
Replacement Parts for Sony Xperia Z3 Compact : witrigs.com/d2vc5
Fix the cracked Sony Xperia Z3 mini LCD screen step by step. Following this video you can do repair broken Xperia Z3 mini screen yourself.
00:05 Step 1 Remove back cover
Heat up four edges at 150 degrees for one minute.
00:40 Step 2 Unscrew five Phillips screws
00:52 Release NFC flex
00:53 Step 3 Remove back frame
01:11 Release screen cable
Pry open a small gap for passing the screen cable through it.
01:21 Step 4 Remove the broken screen
Heat up the edges at 150 degrees for three minutes.
Pry the screen up from the top edge; so heat up the top again for one minute.
02:28 Step 5 Remove the earpiece.
02:42 Step 6 Install earpiece
Cut a piece of 3M or front housing adhesive sticker for fastening the earpiece.
02:53 Put the original LCD supporting frame adhesive sticker on the phone.
03:01 Step 7 Install LCD screen with Digitizer
03:28 Step 8 Install back frame
03:35 Step 9 Screw five Phillips screws
03:45 Step 10 Place the NFC cable in its position
03:51 Covering the back glass, you need an original back cover adhesive sticker.
04:00 Step 11 Install back glass
Tips: The phone will be not waterproof after replacing the screen.
The must-have items
Suction cup - zegsu.com/s/dj2cm
Guitar pick - zegsu.com/s/dj43z
Phillips screwdriver - zegsu.com/s/dj44o
Spudger - zegsu.com/s/dj437
Sony Xperia Z3 Compact Playlist - bit.ly/1ypgswb
Original Sony Xperia Z3 Compact Replacement Parts- bit.ly/1E6rQNZ
Witrigs offer not only phone accessories review video but also mobile repair tutorial including disassembly, assembly, and components replacement guide on TH-cam.
Publisher: Witrigs - bit.ly/1Avo6o3
Witrigs TH-cam Channel - bit.ly/1HZTLkL
If you have interest in DIY phone repair or latest phone accessories review,
Subscribe Us on TH-cam: bit.ly/1xNoHlm
Follow Us on Twitter: bit.ly/1yIu32C
Like Us on Facebook Page: / witrigsphonerepair
Contact us on Facebook Message: messenger.com/...
Add Us on Google+: bit.ly/17oOFBN
Subscribe Us on Blog: bit.ly/14xGAJ6
We will upload Sony Xperia Z3 Compact Full Teardown and Back Cover Replacement videos next week. If you have interest, subscribe us now!!!
~-~~-~~~-~~-~
Like Us on Facebook Page: / witrigsphonerepair
Donate now if you feel our videos so helpful. www.paypal.me/...
~-~~-~~~-~~-~
![The Wall Song ร้องข้ามกำแพง | EP.213 | กรีน อัษฎาพร | 3 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/3KrlLbCsadI/mqdefault.jpg)
OEM LCD Screen Assembly Replacement for Sony Xperia Z3 Compact ：zegsu.com/s/di81u
Replacement Parts for Sony Xperia Z3 Compact : witrigs.com/d2vc5
Do not use adhesive sticker, use a glue B-7000 (buy on eBay or at local store). Adhesive sticker does not keep the screen tightly on the left side and bottom corner due to a design ledge. With the glue it's even possible to make the phone water-proof again. The glue allows to open the phone again with the same technique.
I literally just finished replacing my screen and back cover, thanks to this video. Thank you!!
Thanks for this great tutorial video.
I could fix my phone because of this. I dropped mine a few times. No cracks but the screen was getting so loose that it was only hanging by its screen cable. The phone was miraculously still working. I ordered the back and front sticker, a new ear speaker and usb cover. After good cleaning and successful assembly it is now working again. Yes the phone is fragile but so are many others as well. At least this one is easy to assemble. My next purchase will be a tough phone.... in 2-3 years.
Just followed your video and fixed my phone easily. Thank you!
Successfully used tutorial and mentioned material! Thanks for the great
and easy to understand tutorial, the prepaired links and fast shipping!
(PS: Maybe you could change "Test display before closing back cover" from tip to mandatory. I just saw your tip right before closing and then realised the screen cable got unfixed...worked for me but someone else might overlook it)
Thanks for your kindly suggestion, we fix this problem for repair guide coming in 2016.
Mi Ka
Excellent video, I just replaced the screen & back cover on mine by following this.
Bougth a new lcd, front and back side from the site and followed the instructions. Worke out fine and the phone working correctly. Although the front is a tiny bit loose but it doesn't matter to me. Im happy I got away cheaper then buying a new phone :)
Just remember the 150 degrees are Farenheit and not Celcius (150 F = 66 C). I used a heater gun (200 degrees celcius) and used it for about 10 seconds and the layers came of just fine.
STAFFFFFFAN Hi, I checked out your profile since I suspected that you were swedish (from your name) and you seem to be! I have a question, where did you find the LCD screen here in Sweden? I only found really expensive parts, like 1500 kr. Which is about as much as I would have to pay for the reparation itself...
Du får gärna svara på svenska också :-P
Fröken NH I bought them from witrigs, shipment with DHL was $24.
Hittade inga svenska återförsäljare som sålde billigare, många sålde inte ens enskillt, men kanske går att ringa dom och fråga om ett undantag... Mitt gick på ca 1500 kr, men hellre det än en ny telefon.
Same problem. The precut adhesive simply do not stick at all. Left side of the screen, right above the magnetic useless charger port, is lifting up. Thanks for this vid, now I know it's not just my incompetence ... time to use different adhesive.
Worked brilliantly. Pity it's not waterproof anymore but at least it works & saved me money. Many thanks.
GraceandFrank Ingram Just be careful in your future use.
GraceandFrank Ingram If you want to check if your phone is still waterproof, you can go to service menu (press: *#*#7378423#*#* )
In the service menu, you go to "Service tests" and "Pressure Sensor"
whatever the number it is, when you push the phone, the numbers should go up (mine goes from 996 Millibar to 1009 Millibar). If the numbers stay the same, it's not waterproof anymore (if they go up when you press but you're not convinced, you can repeat the experiment with open USB port and you'll see the numbers stay the same)
On my phone, when you press it, it will equalize in like 3 seconds, I think the phone does have some equalizing mechanism (So it doesn't explode when it heats up)
Thank you so much! With your help i have defeated with my hands one of the main little fears of contemporary age, the broken screen :) I won't fear anymore 'cause i know i can fix it by myself
3 little suggestions that don't come out clearly from the video:
1_ the 5 screws are slightly different, so be careful (the 3 on top and bottom are bigger than the 2 on the sides if i remember well)
2_ It takes a lot of care in keeping away the old stickers and the little fragments because i've read somewhere they can cause the screen to be badly positioned and the break of it.
3_ You can use hairdryer to melt the glue
Thank you so much you gave me belief and instruments to make it
Yeah, it is not easy to fix and replace it by yourself.
Thank you for the video and the replacement parts!! I just got the replacements and replaced the screen of my Z3 compact. It works great!!
With the right tools and this tutorial, replacing the Z3 Compact LCD Screen was a breeze.
Simple, yet brilliant. Was a great help to replace my screen!
Followed the video and I repaired my
Sony Z3C 👍🏿
Thank you
Dear Wit rigs, I have the same problem. Took care replacing the cable. Backlight is on but not graphics on the screen... :( I would really appreciate any feedback with regards to solving this as its not a cheap repair. Thanks for your help!
I have repaired a few screen on the past, a xperia active + motorola defy + iphone 3. It wasn't easy but not impossible. And even with my fingers the size of a banana, every phone have returned to life but, after read this comments (and other forums) I have decided to say goodbye to this xz3c and to sony. Never-ever again
is it possible to change the lcd glue without removing the back plate?
Thanks! Worked for me after 4-5 hours..
Great Video! I had no previous experiences with electronics and I was able to fix my broken screen with no problem.
If you are like me doing it PUNK DIY style and don't have anything from the items apart from the screen you can still do it.
Instead of a screwdriver, I used my paper cutter with trimmed top edge and instead of the blue plastic pads I used my guitar pick. And most importantly I had no original adhesive. Instead I used double sided tape that I cut in the right shape and dimension and it worked altho I recommend to use the original. It holds well, but I had a hard time to fit it as the tape is thicker than the original adhesive pad.
Спасибо спасибо за видео!!! сама заменила экран!!! все очень понятно и доступно!!!! Очень вам благодарна!!!!
Great video thanks. I have one Sony Xperia Z3 Compact and I love very much this phone and as well I have Sony Xperia XZ Premium and I very happy with this phone too
Really helpful video. I got my screen replaced by following these steps! Thanks a lot.
Laisa Mariano thanks for your post, if a woman can fix it than it cant be difficult lol
Erwin Holland I don't know if being a woman has helped (maybe yes), but being a chemical engineer was really helpful. LOL
Laisa Mariano why would being a chemical engineer help to fix a phone? lol
Erwin Holland Dang, burnt. Thats what happens for being sexist. Chemical engineer in your face.
Byron Ortega Haha you girls really have eatchoters back
Nice video. I've followed the steps but still nothing is happening with the screen. At what point do you realise it's worked? Does the screen start working once the digitizer is attached?
It really helped me! I did exactly like the video and it worked out just fine.
Thanks!
I have broked all 2 glass, i buy it new online, i hope it works good after my reapair, it rang when it was broke...
Im planning to use a welding torch to heat the screen up, how would I know when it is 150 degrees?
I am planning to use a hair dryer to heat it up, how will i know when it is around 150 degrees?
+Alec Bowditch i know its been 3 weeks but i just thought i would say depends on your firemaking level the easier it will be to find out. good luck kid stay away from draynor.
+Notor Rious loool
***** ;)
Hi mate
Is the procedure same for Sony Xperia Z3 D6603?
Thanks
Yes :)
Thanks, you tutorial was userful for me.
My lcd came off spontaneously... Great sony quality
Does the speaker and earpiece not work when the screen & back cover are not in place but connected?
I've just taken my phone apart as per the video but behind my sony logo there is a part that is not shown in your video - is this the microphone?
Awesome! Got it to work so far
+TheNotoneofakind OK, that's good!
The display of my Sony phone is broken. Can't find anywhere. Where did you buy your Sony phone display? I would be very helpful if you could tell me a little bit.
I'm having trouble getting the digitizer cable to connect.
Is there a specific method of doing this?
Is it possible I could have stripped the connectors when I took off the original screen?
+thehamburgerman you could make the connectors aligned to each other then press it down,it's impossible to strip the connectors when took off the screen.
how does the earpiece connect to the phone... I didn't see a cable it being disconnected? thanks..
+Stuart Johnston Use some adhesive.
I followed this video and had (almost) success. The problem is after putting on the LCD frame stickers, the screen is coming off the phone. There's light peeking out from the sides and I've already done it like 3 times with the same outcome.
The back is even worse, the back panel just doesn't sit flush. I have done that thrice too and still the back panel starts coming off after like half an hour or so.
Is there any way to ensure that I can make the panels sit flush with the phone and they don't come off? I need to sell my Z3C but nobody is gonna buy when light is leaking out from the sides.
Thanks!
Ankur Kapoor super glue
Tried that too. Didn't work.
Ankur Kapoor Clean the surfaces well before applying the adhesive. Then put on the back/screen (whatever side you're doing) fold up a paper towel on it and then stack thick books on top of it and let it sit for a few hours. The added weight ensures a tight glue.
Tikograph Yeah that worked. For about half an hour. I put 7 Kg worth of my GMAT books and it started creeping back up after like half an hour.
I did this like 4 times going through 4 stickers. I even put drying clips all around the phone for 2 hours and it came off again. My guess is as you use the phone and it heats up, the adhesive just stops working. As of now, both the screen and back cover 1-2 mm off the phone.
I'm sorry to hear that. I've done 2 back covers that way and they've been solid for months without any issues. I'm guessing bad adhesive or the contact points not clean enough?
This sounds like 80's porn music
that music is dope and 80s porn must be too dope
Hey there, I have a question for you! The magnet charging pins on my z3c are somehow unglued (if I attach magnetic cable and then try to deattach it, one of the two pins gets away from the phone's frame with the cable. Is there a quick way to fix this?
Hi, i wan to change display touchscreen for my Sony Xperia z3 compact but confused which one to buy d5833 or d5803. I can't check it becoz of broken display. Thanks
great video. think ive got a bit of a naff kit though as the front screen doesnt stay flush at the sides. the back and both ends on the front are fine. ive now got it under a tower of books to see if it helps at all
+doodlleus Use 5min 2-part epoxy. I used a small needle to apply it. (for sowing) Put the 2 part epoxy on a piece of paper, mix the epoxy and hardener, then , dip the needle into it, then put the needle in between the screen and the frame. Wipe off the excess glue on the sides of the phone. Then hold it down for a about 1-2min, then put some heavy books on the sides of the frame, I used C-Clamps. Let it sit for about 12hrs. Then your set. Also make sure to wear goggles and a breathing respirator because the chemicals give a bad reaction to your eyes and will make them burn. As well as smelling the epoxy is not good for you. Also wear gloves because if the epoxy sticks to your skin it is very hard to take off.
+amberlampz Could you elaborate more? I am about to replace my screen. Are you not using the sticker provided in the video at all? Additionally, are you applying said epoxy directly on the frame below the screen? i would like to try your method, as all I'm hearing is that the adhesive they provide isn't strong enough!
+Wael Dreegia I ended up not using the sticker at all and using super glue on the frame where the screen would contact it. don't use too much or it will seep out. seemed to work fine though i wouldn't trust getting it wet anymore
What kind of super glue do you recommend? Heading to a hardware store after work today.
+Wael Dreegia I used Loctite Superglue but I'm in the UK so it may not be available wherever you are
i have my screen popped out like its not sticking good with the adhesive thing.. can i do something to it without opening the backdoor? (coz the backdoor is just fine)
My screen is all cracked I took it in a shop to get an opinion and they said it would be 200euros because the screen was broken inside and outside, the phone doesn't work as in touching the screen nothing will work only the buttons that are not related to the screen work such as the camera button or the power button... what is your opinion will this method work what will be the cost?
is it not waterproof after the change, because of low quality of the adhesives or the imperfect fit of the plastic? Even a OEM? Are there significant difference between Custom and OEM? You recommend a silicon adhesive glue, but if i need to replace it again?
Yes, sure it is not waterproof. even if you use original sticker.the key is Sony Assemble the screen by machine, it is difficult to make 100% fit and waterproof.
Thanks for making a video :). Need to replace my front lcd screen lol. overheating make it crack easy >:( grr.
Sos un genio saludos desde argentina
display is lifting up from right side, no other issues. how to fix it? whether a new screen is necessary or the orginal can be refixed?
I think the problem is sticker, it is not strong enough.
My screen went black forever . it can be touch but does nt show up anything other than black screen . whats the problem? can i fix or change the cable? Hmmm
Ive just done this and everything went ok but when booting it back up it will no longer charge. Any suggestions?
I just want to replace the mesh on the speakers. I have bought the mesh but do I have to do all this and buy new stickers just to install it?
Front screen of XPeria Z3 Compact is a bit peeled off on the top-right corner. Is it possible to stick with adhesives? Is it necessary to take out back cover also?
i've connected the lcd connector as shown in the video and now i'm testing it to see if it works before reattaching the back cover. unfortunately, the screen remains completely black when i turn on the phone (which appears to be working fine). any ideas what i may have done wrong?
The 3M 300LSE sheed should it be 1mm or 1.5mm thick?
hello is there a place where i can just buy the connector between the phone board and the screen? thanks!
how much does it cost to get a screen replacement at my nearest phone store?
so people know you really do not need to heat up the back or front, i removed the front and back easily without heating up, the only issue i had which a few other stated is front glue is a bit weak, also another tip is the top speaker/microphone bit ( not sure what its called ) that you pull of the screen, rather than reattaching it to the new screen i found it easier to slot it into the gap on the phone, the weight of the screen will hold it in place, doing it this way stops you from putting it in the wrong way and in the correct place aswell
+nay0r Thanks for your kindly suggestion. you can take the screen without heating if you have a broken screen.
+Wit Rigs that is true as it would break so easily just putting it out there for people changing their screens as it dosent matter if it's already cracked, thanks for the video through really good
Hi. I replaced lcd screen with digitizer and all went well. But after few hours I noticed a light coming out from the side. Gently pulled digitizer and found that digitizer is separating from lcd screen. It got separated all the way to the bottom part and now I cant take whole screen out without separating lcd and digitizer and I dont know nothing about the cables if I separate lcd and digitazer. Now thinking to remove mother bord and try that way somehow to push it out all bits together. Maybe there is some other way to take it out? Any solution for that? Thank you.
how can I get the original LCD screen with adhesive sticker and the tools? Joy from Philippines
I have tried to replace 2 Z3 compact screens and both of them the display is not showing just black but touch is responding.
Tried connecting original screen and same thing happens - no display, prior to taking it apart display was working :/
I have fixed Z1 compact phones before and bought screens from same place so pretty sure not new screen at fault.
I am unsure what is problem?
Have you encountered anything similar?
Thanks
Very nice video just sucks that after paying so much money for the z3 compact after replacing screen it will no longer be waterproof just sucks
erick peralta
Only when the phone is replaced by professional phone
maintenance personnel with original replacement parts, can the phone be
waterproof again.
+Wit Rigs Awesome. that answered my question that I was just about to ask. I'm sending mine into Sony to have it replaced. what makes the difference for it to be waterproof again?
Good tutorial, Thank you
I will never buy another sony phone. Had this about 2 years ago and never dropped it, the glue wore away and both front and back panels came away after 6-9months. Both my old Samsung S4 mini and S7 have never had a problem and still work perfectly today
Well, alright! So, I can order everything here (even the tools (I see the guitar picks))? What kind of other heat source can you use (blow dryer?)? And, WAS it waterproof, lol? I just turned on this phone and the dog knocked it into the street -- screen crush. Thanks!
Hello. I have a problem. I have the same phone, laptop fell on it and my glass broke, but not too much, just a little bit at the bottom of the phone, upper half of the phone is working and bottom half is not. What I have to fix, just a glass ? or complete display ? Please help. Please.
hi i never put my z3(not compact) under water but is always good to be sure it is rly water proof and the thing is you se that thing above sony logo at min 1:38 idk if it makes the phone water proof but my z3 like half of that seems to be torn , its is still under warranty idk if i can do something or i need to replace the screen just for that
if I just want to re glue the front frame do I need to remove the back cover and unplug the screen still???
Yes
I can't get the screen and back to stay flat, they wont stick down nicely like in the video, why?
My z3 compact is cracked in the corner, and the top area of the screen is unresponsive to touch. The picture, however, displays fine. Would I need to buy an entire LCD+digitizer combo, or just the digitizer to replace?
***** In theory you just need to replace the digitizer part.
In fact it is hard for professional repairer to separate the digitizer from the lcd without any damage and combine them, let alone the nonprofessional. So we suggest you to replace the LCD screen with digitizer, www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z3-compact-white
I can't get the screen to stick to the frame. It is lifting up on the sides, I've used the pre-cut adhesive, that didn't work, I tried using red VHB adhesive, that didn't work. I even tried using super glue to stick the screen to the frame, but that didn't work either.
those aftermarket adhesive pre cut tapes seems not hold the strength for lcd or battery cover,have to use plastic glue,after that found red adhesive tape,seems to be lot better than pre cut black.
+wachman666 What red adhesive tape did you use and where did you buy it?
ebay
I crashed both my screen and hardcase and now the screen touch doesn't respond but it can charge well but I can't access anything. .... am in Saudi Arabia, where can I take it for repair and how much will it cost me for the screen and hardcase? ? I have Xperia Z3
the models Sony Xperia Z3 and Sony Xperia Z3 Compact uan the same LCD screen, hanks
I have only broken glass . should I replace the screen as well ?
yasser aboamoud
The lcd screen , touch screen and glass are attached
together tightly, so it is hard to replace neither of them by a DIY repair work.
If you want to replace only the glass, you should ask the professional
for help. Or you can buy the original lcd screen with digitizer ( also called
as touch screen ) and replace all these parts together by
yourself.
Hello
I replace a broken lcd with a new one but when I switch on the phone touch screen is not works, I checked the connector from minutes 3.07 but the touch screen still not working
kiitti. Näin pohdinkin.
Will it still be waterproof after replacing the back cover only?
01olk With original replacement parts and professional skill, the phone can keep waterproof after replacing back cover.
So I tested the screen before installing it but the touch won't work, I can see the screen, it's awesome Glad it's working but what about the touch? do I need to install it completely so that the touch will work?
Thanks
Adam Efrati Yes, and plz check out if all the connectors have been connected tightly in the correct position.
The phone needed a rest, luckily for me the battery had only 5% so after I charged it again it's working perfectly, now all I need is the '3M' Double-sided tape I forgot to buy it after buying your screen, too bad you don't offer it as well.
Thank you for your quick reply.
Adam Efrati Sorry to cause you trouble. If you need some 3m adhesive in your next time shopping, plz contact us and mention it via support@witrigs.com. Thx!
You said the phone will not be waterproof after replacing the screen. Why?
How do you remove the cracked screen with the suction tool when there are cracks spread throughout? Wouldn't it create a mess or have shards of glass flying out?
No. They are all stuck to a backing.
Thanks! Well done!
You forgot to disconnect the battery!!!
i have the sony Xperia z3v from verizon is the same process?to replace the screen?
+Wit Rigs . Could you help me please? I have an issiue with no backlight. I found some tutorials how to fix it. I have to do a jumper or change the fuse. Do you know or could you tell me where can i find an infromation about the fuse? Which type do i need?
it looks like the front screen isnt all the way down on the left side! by the way I took this to a shop to be done!
Hello wit rigs,
I tried to record some underwate footage ( for around a minute and in the water at a depth of around 20~30 cm ). my screen is not working now, touching wont help nor will it light up, after getting the back off with out any scratches or bends i dried the back ( the battery was indeed slightly wet ) and now it gives some sort of black light with out any pixels on the screen and my touch it selfs wont get recognized. is there any way to fix this sollution of the ''water proof phone''?
I dropped my z3 compact on the floor a while back. there is literally thetinest crack in the screen ever. but the screen no longer works. im purchasing the tools i need to repair it myself. do i need to do this demonstration on it? thankyou
My Z3C doesn't even have the tiniest scratch, and still the stupid screen went off partially. Sony is a big thief, never buying their crappy stuff again.
Rebecca Mottram did you fix your phone?
happened the same to 2 z3 compact here... the screen just fall out...
Hi, Please tell me what temperature of hot air are you using? Thanks,
TheBigMaras It is above 150 celcius.
I followed this tutorial to the letter, however after connecting the new LCD screen I can see it lightens up but remain black and unresponsive... I tried to reconnect the old one and it is the same. I can access the phone from the PC and take screenshots, however I can't see anything on the display.
Did I damage the phone when replacing the screen?
Kotetsu51 Have you found an answer? I have the same problem
Jean-Marc Vogel any luck on solving problem?
Kotetsu51 I have the same problem. Took care replacing the cable. Backlight is on but not graphics on the screen... :( I would really appreciate any feedback from someone with some knowledge. thanks
Nigel Hyland you sure you put the electric ribbon the right way round?
Daniel Stringet yes it is the right way for sure. to put it the wrong way would mean you would have to twist the ribbon. I guess the digitiser i bought is faulty. Looking for a reliable supplier if anyone has some tips
Same screen is compatible with all corría models
Hi the bottom half of my z3 compact is completely unresponsive to any touch after a friend dropped it by accident, I've gone to various phone repair stores and most say that they cannot do it due to the phone being moulded in a certain way at the Sony factory. Unfortunately I couldn't afford insurance therefore don't have it, do you know if mobile phone companies such as Vodafone (my contract) are able to repair them? Don't wanna call them as they always seem to keep me on the phone trying to pay the price without giving me time to think lol
ive changed the screen but the touch is not working any ideas?
Wit Rigs
My Display is still working but the touch isn't.Does this fix it ?
+keanu farias Yes, but this video shows how to replace the whole screen assembly. To replace the display only asks for sepcial tools and professional skills, so it is not easy to fix the broken display just by DIY repair work. If you want to replace the phone by yourself, you'd better replace the whole screen with digitizer.
Hello, I followed the video. My new screed is beautiful but does not respond to touch. What should i check???
coronan1 Plz check if you have connected the connector correctly.
I have connected the screen, however it does not work (no backlight, no graffics); im pretty sure i did not damage anything on disassembly. and advice?
+Agata _ First make sure that the screen you use is in good quality and then check out again if the connectors have been connected in the correct position.
+Agata _ screen is defective, return it and get a new one.
Good work
I own a Xperia Z3V is the process similar to this?
Hi question.can an xperia z3 use an replacement lcd from an xperia z2 since both have a 5.2 inch screen.?? Since im thinking of using a z2,lcd in a my z3. But unsure b4,i buy online
Hello friend. It has screen and change the screen of the sony model xperia Z3 tablet compact
SPG621?
As you can see, at the end of this guide.
The LCD has already separated from the frame. the adhesive they supply is BAD, not fit for the job