GEPRC Cinebot30 is the new standard in FPV Cinewhoops
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- Wow! The CINEBOT 30 is really good! Beginners and Pros will enjoy this one.
You can find it at the links below:
-GEPRC STORE: geprc.com/product-category/dr...
-BANGGOOD STORE: www.banggood.com/custlink/mGG...
-DJI Action 2 Camera: amzn.to/3DTmcpW
-Insta360 GO2 Camera: www.insta360.com/sal/go_2?ins...
Follow me on:
Facebook: / captaindrone798
Twitter: / captaindrone798
Instagram: / captain_drone
****************************************************
BELOW IS THE GEAR I USE TO CREATE MY VIDEOS:
THE SOFTWARE I USE TO EDIT MY VIDEOS IS FINAL CUT PRO X
A-ROLL CAMERAS (without lenses):
Canon C70: amzn.to/3wnJzod
DJI RONIN 4D: www.bhphotovideo.com/c/search...
Canon EOS R: amzn.to/2W0qPq9
Canon M6 MkII: amzn.to/2n0ISiO
Canon XC-10: amzn.to/3sb9YTV
B-ROLL CAMERAS:
DJI OSMO ACTION 2: click.dji.com/AMlY5d2ucYWP3HL...
INSTA360 ONE R: store.insta360.com/product/on...
INSTA360 GO2: www.insta360.com/sal/go_2?ins...
INSTA360 GO: www.insta360.com/sal/go?insrc...
GOPRO HERO 10 (USA): amzn.to/3zIvWxM
GOPRO HERO 10 (CANADA): amzn.to/3EUzXmn
GOPRO HERO 9 (USA): amzn.to/3dlZasS
GOPRO HERO 9 (CANADA): amzn.to/30Ttmq2
GOPRO HERO 8 (USA): amzn.to/31BWboJ
GOPRO HERO 8 (CANADA): amzn.to/2MYs5WX
GOPRO HERO 7 (USA): amzn.to/2XXqeWv
GOPRO HERO 7 (CANADA): amzn.to/2Xjq6Vr
MOBILE OSMO POCKET2: click.dji.com/ABIkCjLwufxszCw...
ACTION CAMERA 3 AXIS GIMBAL: amzn.to/2DCrTJj
SOUND AUDIO:
TASCAM MOBILE AUDIO RECORDER (USA): amzn.to/2IKMr6n
TASCAM MOBILE AUDIO RECORDER (CANADA): amzn.to/2p3mExN
TENTACLE TRACK E: (CANADA): amzn.to/3rO11xY
TENTACLE TRACK E: (USA): www.bhphotovideo.com/c/produc...
ZOOM MOBILE AUDIO RECORDER (USA): amzn.to/3bHzh86
ZOOM MOBILE AUDIO RECORDER (CANADA): amzn.to/3sqFA5A
RODE STUDIO BOOM MIC (USA): amzn.to/2LqTzrL
RODE STUDIO BOOM MIC (CANADA): amzn.to/2XIX3s6
STUDIO VOICE OVER MIC: amzn.to/2TlTjJt
RODE WIRELESS: amzn.to/2LS2nqp
LIGHTING:
STUDIO LIGHTING (USA): GVM: amzn.to/35HcV2K
STUDIO LIGHTING (CANADA): GVM: amzn.to/3bG0kAD
STUDIO LIGHTING: FalconEyes SO-40TD: amzn.to/2N9pp7J
OTHER CAMERA GEAR:
Action Camera Hat (USA): amzn.to/2OFz5Hu
Action Camera Hat (CANADA): amzn.to/2NwT7Zh
Gorillapod 5K Tripod (AMAZON USA): amzn.to/368TFtH
Gorillapod 5K Tripod (AMAZON CANADA): amzn.to/2Tg3G39
Cool Orange Mini Tripod (AMAZON CANADA): amzn.to/2Xk5vNV
Cool Orange Mini Tripod (AMAZON USA): amzn.to/2X4JYsn
DRONE ACCESSORIES:
Lipo Batteries I use on most FPV Drones: genstattu.ositracker.com/1912...
Round Landing Pad: amzn.to/2HBqp2w
Square Landing Pad PRO SMALL (USA): amzn.to/3e9Us2c
Square Landing Pad PRO SMALL (CANADA): amzn.to/3BQou5Y
Square Landing Pad LARGE: amzn.to/2nukqqH
================
#GEPRC #CINEBOT30 #FPV #Drone #captaindrone - วิทยาศาสตร์และเทคโนโลยี
![☀ Маленький, но злой. Синевуп по фен-шую [GepRC Cinebot30]](http://i.ytimg.com/vi/_eR-XCImn8c/mqdefault.jpg)
![☀ Маленький, но злой. Синевуп по фен-шую [GepRC Cinebot30]](/img/tr.png)
The Cinebot 30's prop guard frame cracks if you hit something head on. You don't have to be going very fast (medium speed). I've noticed cracks in the frame where the camera cage meets the prop guards, and also, for some reason, just under the antenna mount in the back (also in the plastic, prop guard frame). The cracks are forming where the two camera cage screw holes are. The plastic is very thin there and is prone to easily breaking. If you've bumped into anything, check the frame for cracks.
I've ordered a new frame to replace the cracked prop guard, but if the next frame cracks as fast as this one (I received mine about a week before Christmas), I'll probably shop around for a different cinewhoop. I'm new to FPV and have mostly just been flying over grass as I am still learning.
I contacted GEPRC two days ago about the frame issue but haven't gotten a response yet.
I absolutely love this quad and hope I just got one out of a bad batch. I just want to give a heads up since I haven't heard much in terms of frame problems.
Hi Steve my friend.
A very neat and fast drone. I like the way it flys. Smooth flying.
I think it's going to be a great drone.
Thank you so very much and God bless. Have a great week everyone
Very nice and stable with a lot of options. I really enjoyed the flight. We all know our friends passing by on the road by there car. Captain knows them also by there drone or plane😅. Great review.
Thanks Captain
nice review Captain looks smooth and fast prise about right keep them coming.
Another neat drone and review Steve.
Omg I feel like I need this one. Top shelf cine 👍
About time!
Enjoy the week always great review
I'll have to put this on my wish list!
I love this video 🤩📸
Finally the one we've been waiting for has arrived, it's similar to cinerace20 with led
Excellent Review Video. Very Nice FPV. Thank You.
Cool, I like it. It's been a while since I have flown so I had to charge up some batteries to go out and fly my Foxeer cinewhoop just to satisfy the urge to fly after watching your video this morning. ;-) I think Geprc will have another winner with this new drone. Cheers from down south !
I love it when I can inspire people to go out and enjoy the hobby. I get the exact same feeling often after watching other people fly.
The footage is really great
Many thanks for sharing Captain; I have purchased (in the last 3mths) 2 x older "racing / FPV drones that were quite expensive when new however turned out to be quite ordinary, particularly regards low speed / height control; moral of the story; dont skimp on this style of Drone !!!!; will look at purchasing one of the variations on your link!
thanks sir steve. you are the most trusted , source of info.
I appreciate that!
Really nice set up
Hi Steve....Really enjoyed the review.
Can’t wait to see a 3.5” prop version
Love it! Just ordered the o3 version with crossfire,, cant wait. They are on backorder now for a bit. I guess that is a good sign,, lol happy flying from Clearwater fl
Enjoy!
The Cinebot is a very cool woop. Thanks again!
Great video, thank you
Very cool 🤝😎
Sounds good
Love the video I got the geprc Cinilog35 performance 6s even with gopro hero 9 it's got so much power and is so smooth on your recommendation this one looks great tho
Pulled straight from the Speedybee Flex 25
2 years after review but still good, will buy for practices like my first FPV drone :) greetings from Ukraine
Thankx
I think it's perfect to take pictures with GoPro!
I’d really like to know how it flies with a full size GoPro11. I might have it buy it if that works!
me too
I bought one myself and it arrived last week. It flies just great with a full gopro 10! Its obviously heavy and not good for freestyle but even with a huge 1400mah 6s battery, its great for slow cinematic shots. With all that weight, its very tame and controlable when indoors. Got 7-8 minutes with this setup.
Also flown it with a gopro bones and the same big battery, got 9-10min flight times and very agile, even with this battery which is bigger than the one they recommend... but i really like heavy quads for indoor real estate and architecture tours, so even with a whoping 620g total weight with gopro10 + 1400mah 6s, i really enjoy flying it.
@@rafaelm3404 awesome man, great info. Thanks for taking the time.
I like the drone
nice Capt.Drone i wonder if have one
Great review.
Thanks!
Hi Great review One Love
Thanks so much
please always mention the flight time with or without a gopro.. thanks
É chow amigo
Tmj ✌✌✌
Looks great - can't wait to fly mine ... IF I can ever get the micro sd card inserted in the 03 air unit! It's freaking IMPOSSIBLE!
great review sir.
Thank you
Good evening nice video cool review
Thank you
Cinebot30 vs PAVO25? I think im ready to move on from my Tinyhawk 3 but not quite ready to pull the trigger on an Avata. Great video as always!
Excellent review..... How can I install a GPS and get the RTH to work when I use it outdoors?.... how far can I go with CRF RX.?.... Thank you.
would be cool if compare with cinelog30!
Very cool cinewhoop.
Man.... late October and Ottawa already has frost on the ground... its been much slower in the west
I think the west has snow today. We usually get our first snowfall that remains on the grass by end November or early December.
Since I am a newbie on FPV drones I was thinking of purchasing a DJI goggles V2 version instead of a V1 used ones in order to get compatibility with 03 system as well. The V2 support 03 DJI unit while the V1 does not. Hopefully the V2 has a full compatibility with Vista or Air unit.
V2 goggles work with O3 and Caddx.
Love your video's, very informative, I was wondering if you can advise how to pair the DJI camera that comes with the Cinebot 30 to the DJI FPV V2 goggles,
Just link them via the link button on the drone and on the goggles. I'm guessing you have long figured this out since I see this comment is now 7 days old.
Nice video, thanks for sharing! Subscribed :)
I've been flying drones since 2013 (started with DJI F450 DIY) but would like to get into FPV and cinewhoop. The GEPRC Cinebot30 looks like a good one to start with. I'm curious about the DJI RC you're using, I have something similar with my Phantom 4, is there a receiver that I can bind to with that RC? Or do I need to get something new like the Radiomaster T16S? Thanks!
The RC you have for your Phantom is what is known as a TOY CONTROLLER. The reason they are called TOYS is because they are designed to only work with the Phantom and nothing else so when you toss away your Phantom, you also toss away your controller. To get into the FPV Hobby you would need a programable RC radio. Radiomaster is a good choice.
Can I use the newer DJI fpv controller ? With the same version that you
Have correct because I just ordered an I’m
Waiting on it to
Come😊
Requesting for DJI AVATA vs CINEBOT30 with DJI O3 AIR UNIT comparison which one is better please
Do you have a link for the 6S HD CRF RX for Banggod.?
Could you please tell me which drone would be better between the sg907 max or the new aviator 8811 pro? I have a choice to purchase either of these drones and I don't know which way to go and I trust your judgment fully.. PLEASE HELP ME!!!
That was so cool to watch! Felt like I was flying.
I'm wondering if the guy flying the plane was mad when you got close?
Oh, they are all used to me buzzing around their planes.
Ithoroughly enjoy your videos and value your input. For a beginner fpv flier that has does have a regular mavic air. Would ypu suggest avata or something like this.? Thanks again
DJI is the king of making beginner drones so if you can afford the Avata, go with that.
Hiya Captain,
hey please can you try and find the time to review the too good to be true, ultra bargain,
AE-3 Pro Max drone?!
I'm a novice pilot but have enough experience to be blown away by what you get for your money, like lazer obstacle avoidence, 3 axis gimbal, excellent build quality and much more.
And all for £160 or approximately $110!
I'd love to hear what you have to say!
Cheers matey, from the UK 🙏
Great video 🎉
Thank you 😁
What receiver do i get with thr sam version you have
prodotto molto interessante
Great review! Looks like a sweet addition to the GEPRC lineup. Kind of a best of both Cinelog30 and Cinelog35 Performance design (I have both) I was comparing the carbon fiber parts of this and the Cinelog30 and they look identical. The physical differences appear to be the rubber parts for camera damping and the prop protectors. Are they the same material as the Cinelog35 Performance? If so I bet they are way tougher than the ConeLog30.
The CINEBOT is a bit more refined in construction, held together with just a few screws.
@@CAPTAINDRONE798 interesting, thanks for the insight on that. I do like simplicity for repairs as well!
@@CAPTAINDRONE798 Now that you have tested basically all the GEPRC cinewhoops, which one do you feel has the best balance of quality, flight time, tune and built quality?
Forexample which one would you buy for your own money Cinelog 35 performance or Cinebot 30?
@@jianliu9420 That is a question I can’t answer because I have very different needs then you, so if I tell you what I like for my skills and use, then it may not match yours. Once you are in the FPV hobby and experienced you’ll then be able to pick the FPV drone best for your skills and needs. If you have no experience to make such a decision then Whichever one get will grow with your skills.
what is the flight time with and without action 2
Hey Steve loved this video, really think this vids gonna make me go fpv, have you got any suggestions on what specs to go for me, I wish to just fly with a gopro 11 not fussed about the bulit in camera, I havnt got a contorler or headset either any suggestions?
To fly with the weight of a GoPro 11 means you should look at a drone with 3.5 up to 5 inch props because that is plenty of weight. Have you watched my video series entitled CAPTAIN DRONE FPV FOR BEGINNERS… there are 12 episodes.
Best review on this drone. Just bought one but cannot find if this whoop can bind with the DJI FPV controller 2 that comes with the DJI FPV drone???
If the one you purchased has the DJI 03 system in it, then yes it will bind.
Hey Captain drone, nice review. Question for you, I am looking to get the cinebot 30 with the dji O3, I plan on using my dji goggle 2 and fpv controller, on geprc page, which receiver option should I pick? Appreciate your response in advance.
pick PNP. Then watch videos to learn how to set your Goggles for O3 and also learn how to bind and finally watch videos on how to setup a drone in BETAFLIGHT CONFIGURATOR.
Wow. That GEPRC CINEBOT30 FLIES SO SMOOTH. I really enjoyed your video. It was on the top of my search for the cinebot30. Thank you for shari g. I had one concern. When you caught that drone out of the air, it was impressive, but risky. Please avoid catching any drone that is powerful enough to cause injury. Safe rule of the wise, if you wouldn't touch it with it armed and props spinning, then you shouldn't touch the props with the battery plugged in at all. Catching that drone from the bottom is a huge risk. Accidents happen, and electronics are not perfect. Please plug in the battery on the takeoff surface. Unplug battery after drone has landed, is disarmed, and transmitter is secure. Then, it will be properly safe to handle it near or around the props. I would encourage you to share some safety information in a future video to give your audience a good idea of proper drone handling and operating. Thank you again for your time and video!
Hello capitan! I recently got my pavo 25 for my first fpv drone as you recommended. I think I'm ready to go for my next drone, do you think this could be a good idea or could I go for the nazgul5 evoque?
The CINEBOT30 would be a better choice for a beginner. The NAZGUL5 is great if you have a wide open space and don't fly near people, including yourself. 5" drones really hurt.
I have a drone question sir. I am trying to get my 2nd drone. I have a $170us budget. I really like the kf101 max but I can't find it at this price point. Do you have anyone that could help or anywhere to find something similar.
Can you do a flight without the prop guards or would you need spacers to keep the drone intact?
Prop guards are part of the frame. If you remove them you’d have to 3D print something
Can this google work with new 03 unit??
Nice review. Just pulled the trigger on the new version with the DJI 03 camera! How did you get the LED's to work with a switch?
When you go into Betaflight under MODES, you’ll see the option to assign a switch to the LED lights.
@@CAPTAINDRONE798 Thank you so much. Did you have to do anything with the LED strip tab? I assigned it a channel and added the Mode, but still permanently on. Thanks again.
@@DG-tv5ic I just set mine up very simply in Betaflight Configurator
Hey ya'll. What controller would anyone recommend to me for the O3 HD version? Don't wanna go DJI one for obvious limitations of I decide to get a bigger drone down the road. I am new to FVP, only have dji Mavic pro. Thank you for suggestions.
ELRS or CROSSFIRE then. I'm a fan of CROSSFIRE and I simply have a CROSSFIRE NANO module that I can fit onto the back of any of the radios I wish to use.
How’s it compare to Avata?
CD -- Been watching your video of November 2021 on the BEST drones under $299. One GREAT review.🥰 Do you have an "updated" (latest models) video of the same? Thank you.🤔
Not yet
Great Review, looks interesting. Btw: What gloves do you have? They look cool too. Mind sharing a link?
They are gloves from days of old. I made a vid about them here: th-cam.com/video/0KSZKmuyFjc/w-d-xo.html
what controller do u use
great video, I have a question about the receivers, If I have a dji controller 2 I know Im good with taking the pnp version with the O3, but if I choose the tbs nano just to have the option in the future to change controller do my dji controller work to or I will need another controller. Im thinking on getting next a tx16 with the module or a tango 2 just asking to be shure. Thanks to anyone that can help
DJI FPV Controller 2 can only talk to a DJI FPV receiver. CROSS FIRE is a RECEIVER, so you need a CROSS FIRE Transmitter to talk to it. If you get a TX16S, you'll still need to buy the CROSS FIRE transmitter module to place on the back of it.
👍👍👍👌
what happens if the stability test is not successful? PLEASE HELP
Muito bom, mas da para gravar com cartão Sd no drone?
No, you can not put a micro sd card in the FPV drone.
Nice vídeo, please can you tell me how to activate the function to turn the lights on and off ?
In BETAFLIGHT CONFIGURATOR under the MODES tab you can assign a switch to it.
As a Cinebot30 owner that has crashed many many mannny times I can confirm it is definitely very durable and love everything but I just wish the batterie’s lasted longer than 3 minutes (4s battery)
What's the difference between the Cinebot and the Cinelog series?
Hola Mr, acabo de probar este drone, solo hice hover, pero se carga mucho hacia la derecha, es correcto?, o tengo que hacer algo en betaflight?, muchas gracias por su ayuda. Saludos desde México.
si estas volando estabilizado es normal que se mueva para algún lado si no esta bien calibrado en betaflight. Pero lo mejor es volarlo en Acro para sacarle su potencial (y ahi no se va a mover salvo que tú lo hagas)
do the filters from Avata fit the O3 air unit?
Good question. I don't have any so can't check.
Please reply me how's that gopro attached on cap and still stable 😂
I just got mine! How did you configure your LED toggle switch?
In betaflight configurator. I just went into the MODES tab and assigned a switch
Hi again from Toronto Capitan Drone, your videos were very helpful in the past. I am looking to order GEPRC CineBot 30 6S TBS Nano RX version and looking to order the TBX Tango 2 controller, I am seeing there are few options out there, including new one coming soon. I was wondering which is the best one for this set up. I am planning to use it with DJI Goggles Integra, not sure if I need to consider different Goggles option as well. Thanks in advance for your reply.
I do not own a TBS TANGO 2 Transmitter so can't comment on that. However, as long as you get the CINEBOT 30 with the DJI 03 Air unit, then your FPV Goggles will work fine. As for a receiver in the drone, if you do buy the TBS TANGO 2, then the receiver should be a TBS Nano.
@@CAPTAINDRONE798 thanks for the reply. I own the DJI fpv controller 2, but after watching a bunch of reviews I decided to go with a tango 2. I also recently purchased the DJI Avata, but had some very strange connection issues with the drone flying just 200m away from me. The CineBot 30 seems a great solution for combined flying both indoors and outdoors, so I kind of decided to go with it. Your review is great. Actually your channel is first stop now when I think of ordering some new drones. I am new to the FPV world 🌎 and find your reviews and “How to” videos extremely helpful. I was also very happy to see that you are in based in Canada.
Do you have to take the CInebot30 apart to fit the micro sd card into the o3 air unit on the cinebot30?
If that is the case then I normally mention things like that in the video. All DJI O3 Air units will easily transfer the files off the micro SD card by just plugging in your USB C cable to it.
I was wondering if you taking any blackbox log of the CineBot 30? Particularly looking at the motor performance?
Nope, I have not used the black box feature.
I'm having difficult to bind my Cinebot30 ELRS with my Radiomaster ELRS Pocket. Can you do a video showing how to do it?
I show how on my ELRS POCKET set up and bind video.
How to configure the switch for the led?
Go into BETAFLIGHT CONFIGURATOR and then to the MODES tab and you'll figure it out.
Hi.
I’m looking into getting one of these with the O3 air unit. I’m a bit sketched out though as upon reading comments on various reviews, people are saying that you can’t get to the sd card, and can’t put the Avata nd filter on it.
Can you offer any insight into these issues as it’s kind of vital to put the card and filter in use for each flight.
If this is correct then surely that’s a massive design flaw and something that a company like geprc should not have overlooked and surely should correct for future?
The unit in my review was not the DJI O3 version so I can’t provide comment on the micro SD card location and access. None of the filters from the Avata fit well on the O3 due to how the camera is designed. I expect companies like Freewell to offer such filters.
How about a video showing how to get this thing set up to fly rite out of the box? Binding procedure with Goggles 2 and binding to the radio using a Crossfire module in a TX16. Please and Thank you.
Have a look at my FPV FOR BEGINNERS video which will get you started: There are two episodes, one DIGITAL and one ANALOG. Both older videos, but you'll get the idea of what needs to be done:
th-cam.com/video/LW7JzNQ7P7E/w-d-xo.html
th-cam.com/video/twPV6SEwZhI/w-d-xo.html
Nice video, i made also a Unboxing from my Cinebot 30
Can you explain to me the setting of how to turn the LED on and off from the remote control? thanks
Go into the MODES tab of BETAFLIGHT CONFIGURATOR and you'll see the option. Assign it to a switch.
@@CAPTAINDRONE798 thanks for the reply but i don't understand...so i put the bec of the cinebot 30 leds, and i put the third wire on the uart number 5 tx, now i have to go into mode, can you tell me more precisely how to do it? Can you give me a more detailed answer? thank you
How would you compare it to it’s brothers the cinelog30/cinelog35 (and cinelog35 performance)?
The cinebot30 is a more modern design. The 35 is definitely faster.
Great video. I cannot figure out how these GPERC drones are build and how to set them up? Do you have to build it, if so, does it require soldering? How is the setup? Do you have to configure ever single parameter, like you had to with Pixhawk controllers? Do they have some sort of flight modes or is it pure manual flight? Thanks.
These are in the advance drone category which means you require knowledge of transmitters and receivers and configuration software and you need hand/eye coordination piloting skills.
@@CAPTAINDRONE798 I how to fly helicopters and planes and own a bunch of DJI drones, including the FPV one. Built my first drone 10 years ago and hated all that setting up, messing around with flight controller and soldering. I was hoping that FPV drones made it past that. You know, made it more user friendly. I guess not. Unless of course you go with DJI again. I don't mind the DJI stuff, but the last thing I would want to do is crash that FPV drone. Whereas with other drones, parts are cheap and putting it back together is not the end of the world... Thanks.
@@fc1133 you might have that backwards. FPV drones are the easiest drones on the planet to repair. You see, as a person learns the FPV hobby they also learn how everything works so every FPV pilot is their own repairman. Certainly FPV is difficult but everyone you see on TH-cam flying FPV all began with zero knowledge. So if ya wanna get into FPV it is certainly doable and all up to you.
@@CAPTAINDRONE798 I know what you mean, and I agree. I just hate soldering, ha ha. I am also not a fan of having to setup all the parameters, but maybe it's not as bad as I think. Have to watch a video on how to do it... Thanks.
Hi Captain… I am in the middle of purchasing my first cine whoop but i am unable to choose from a cinebot 30 or Cinelog 35 v2..
I have a cinelog 25 v2 frame which am planning to custom build with Iflight Blitz F7 55A io so I can go 6s for some stability. Can you please recommend which one to go out for. Thanks
You buy a drone based on size, 25, 30, 35 only if you want to mount an external camera…. The bigger the drone, the more it can lift.
If I get the Cinebot 30 with the DJI air 03 unit, do I still need a camera as well? I'm new to this.
No camera needed
What do I need for my normal goggles v2 and do I need a new rc than the rc 2 from DJI to fly the cinelog?
If you want to use DJI FPV goggles then you have to order the same drone I showed in this video. You will also need the DJI FPV radio (black one) that is on the DJI website.
@@CAPTAINDRONE798 ty great vid
I bought this drone based on your recommendation. How do you install the tubes without breaking it?
Tubes? This is an old comment so I'm sure you have resolved the issue by now.
Hello. Thanks for yours video. Can you help me. I have a question about dji fpv controller 2 and cinebot30 with O3 unit. Does it work together and what kind of cinebot 30 I need to purchase?
Watch my video entitled CAPTAIN DRONE FPV FOR BEGINNERS episode 12, and you'll have all your answers.
@@CAPTAINDRONE798 thanks I'v just seen it
Do you know what standard gopro mount works for this FPV?
Just zip tie the mount that came with your gopro to the drone