Awesome video review! I built my own version of whoop 2.5 from scratch and I'm quite happy with the flight performance. And inside the house, I can fly it really really slow and go inside very tight gaps.
Thanks lot for the excellent review. Have been googling around on which first fpv to get. By the way, I have been following your channel since I flew rc plane & heli quite some time ago.
Great insights and review as always! I've got a few of the cinelog 25's adapted one with thr foxeer (unbreakable) frame and the speedybee led lights so a miniature version of this and I have the geprc cinelog 35 I think they are top cinewhoops cant decide if this is worth me shelling out for aswell 🤔
Excellent video. Can you bind the DJI FPV controller 2 with this whoop? I have the DJI FPV drone and instead of risking that drone in stunts, I just bought this extra drone for that.
@Painless360 Thanks for the video. What do you think about Cinelog30 after one year in use, how many duct guards have you replaced, is it still flying?
Excellent review! Thank you! - what do you think about this vs the cinelog 35 6S performance? I’m currently in between these two (or wait for GepRC to release a Cinebot35)
Cinelog35 has more power and makes more noise but flight time is only about 6 mins with a larger battery (11+ mins with this). Cinelog35 is probably a better choice for full sized action cameras but I prefer the longer flight times, improved prop guards, quieter noise and metal camera protection of the Cinebot30. It can be used for more than short filming flights...
@@Painless360you can get 10+ minutes with the cinelog 35 you’ll just need the throttle higher on average. The 35 has wayyyyyy more power and is great for freestyle or cinematic, just change the batteries. Cinebot 30 does the same as the 35 with less power and punch.
Loved the video! Do both the vista nebula pro nano version and Runcam link wasp version - do they both connect to the old DJI fpv controller? I know the link does. The vista I’m confused anymore, does it require the company to do any special wiring for that one to work?
its super tempting... love the light too. Just at 450+ Gramms it's sadly not really usable for close-to-people shots... and for everything else I don't really need a cine-quad anyway... Hope we will get a sub 250g with similar performance at some point, too...
Great review, wad considering getting a DJI Avata but this seems like great alternative, where can u get them in the UK? What FPV Goggles would you recommend?
Hi ! Really great review, like it a lot ☺️👍🏼 But which one between cinebot30 and CL25 only for flying indoor only like houses and business office ? Thank you very much
It depends on the physical size of the quad and flight time you want. You can calm the throttle response on a stronger more powerful quad to make it easier to fly. CineBot30 is my top choice unless there is a compelling reason to go with one of the others are the moment...
I want to buy a cinequad to film outside & inside. I have a fullsize Gopor 11 and I dont want to buy another naked gopro because of the cost. would you suggest the CInebot30 or rather get the Cinelog35? I feel that last one might be a bit to big...
I have a Protek35 that I stopped flying just before Christmas last year. Powerful and a good flyer, it was also very noisy...annoyingly so. I eventually broke the USB port (built in L adapter broke) and I just never bothered with it as I put time into my 5"s and a some sub-250s I picked up. I've been considering reviving it now that I am on DJI and Crossfire (it's analog/RSXR now). Given that I'd need to spend $250 on a Vista/Link and install it, replace a cracked duct, fix the USB on the fc and buy and install CSRF nano, I am thinking this might be a better path in terms of money and effort. It looks great! Question: Is the LED configurable in Betaflight? Can the color be changed? How does the switch turn it off? I use LEDLOW on an AUX on my other quads where I have installed LEDs to control lights. Sorry for the ?s but I am really considering picking this up.
@@leaoaugusto I actually do not know. I did have a couple of crashes (one that cracked the prop guards) but one day I went to plug in to change my rates and the USB L adapter felt loose. I could not get my PC to connect to the fc. I also had other drones I was invested in and never bothered fixed it but I had the notion to rehab it recently since I did pay good money for it.
Great Video! How's the quality of the Cinebot guards in terms of durability? I owned two of the CL35 and the guards were absolutely garbage. They would break in the lightest of crashes. How do these lineup in the event of a light to medium crash. Do you think these are resilient enough?
So will it handle a go pro easy enough if using a 1400mah 6s? Also, what is the pros and cons between the Cinebot 30 03 CRSF or a Cinelog 35 V2 03 CRSF? I’m fairly new to fpv so would like to get something a bit smaller than my Bob57 for some of my local spots I can fly. Cheers.
Hi man great video 👍. Does this cinebot 30 nebula would work with dji fpv controller 2 and dji goggles 2 or I have to get more expensive one cinebot 30 03 unit. I'm confused which one to get to work with my goggles and controller. Thx
Nice vid. Does it come with an XT30 option as all my 1100 batteries use that plug, and why doesn’t it have the GEPRC Naked GoOro power cable coming straight off the battery pads on the AIO board (or even better, have it on an aux channel)? That cable should be standard
nice vid! can u also test it with using 1550 Mah 6s and see how long can it last? do u think its possible to carry it if i m not carrying a gopro on this drone?
I got a question because I'm going to get this drone but I dont know what Headset and controller I should get Ideally Less than 1k as the drone takes around 500, also are you using 6S ELRS 2.4G?
Awesome review! What flight times you think I could get with a full go pro hero 8black? For some real state and those kinds of flights. Also what about the throttle with a full go pro? Thanks for your time
I haven’t been able to get more than 7 mins without a GoPro. I have a bones so I’ll test it with that. But I don’t think you’ll get more then 4/4.5 min max with a hero 8.
Hi, I got mined un assembled, I put everything nice but I have connected the light through the 5 pad bec incledud, I’m not sure how can I manage to turn off lights from switch, I think I should conmect the 5 bec pad to URT can you show the connection you have to the bec and led
Great video,mate. What's your thoughts about wind resistance and indoor flight (stability) when we compare it to Avata? I'm still deciding between this two. I'll specially use my drone for indoors flight but it'll be common I need to fly over the shore (sometimes with a lot of wind). I believe when we are talking about wind, maybe cinebot (specially 6s) is a better option...right? But about hovering or trying not to wobble, is avata a better choice? Tks! CHeers from brazil.
Cinelog35 has more power and makes more noise but flight time is only about 6 mins with a larger battery (11+ mins with this). Cinelog35 is probably a better choice for full sized action cameras but I prefer the longer flight times, improved prop guards, quieter noise and metal camera protection of the Cinebot30. It can be used for more than short filming flights...
Awesome CineQuad - It certainly looks like it ticks more boxes than any similar format cine-whoops. But, and to me it is a BIG but , there is no HDZero option listed
Nice vídeo, congrats! Please how did you setup the lights on radio to turn on and of ? I accidentaly deleted the function on betaflight and now the lights are off . Thank you
@@Painless360 yes man, thank you very much, i think i did something wrong because the lights aren't turning neither on nor of kkkkkk. I would like to put it always on, is there any way? Do you have the default configuration code to use at the comand line? If don't no problem you gave me a lot of information too. Have a nice day.
Could you test fly it with an iFlight 4s 18650 LiION 3000mah pack to see if it will fly longer than with the 6s 1100mah Lipo battery pack. The weight of the 4s 3000mah iFlight LiION pack is same as the 6s 1100mah Lipo pack
The Peano antenna is a 5.8 Ghz frequency, that higher frequency doesn't penetrate very well so this can't be used in doors, it won't penetrate walls. So this is useless for me.
My cinebot 30 after arming and throttle up, it fly up but when I go throttle down to zero the motor still spin very fast and does not slow down back to the state it was at when arming. When landing it wanted to bounce. Do anyone know how to fix the problem. I'm pretty new to ELRS and not too sure if it some setting in betaflight or the Drone problem or the Transmitter TX16S problem.
Cinelog35 has more power and makes more noise but flight time is only about 6 mins with a larger battery (11+ mins with this). Cinelog35 is probably a better choice for full sized action cameras but I prefer the longer flight times, improved prop guards, quieter noise and metal camera protection of the Cinebot30. It can be used for more than short filming flights...
Please help, My cinebot30 can’t handle the full gopro with 6s 1050mah batteries, anyone have an idea why? Does it need to be fine tuned or not? I ordered from Geprc offcicial website
@@Painless360 I thought user 1 stands for a user profile and therefore removed it directly. Instead, I tested everything possible in Betaflight's LED tab. Many thanks for the help!
what's better overall beginner indoor/ outdoor drone ?? - this cinebot 30 or the cinelog 35?? il have a full size go pro on it (hero 8 or 9) - thank you
@@Painless360 I'll search for it. I was thinking about build myself a whoop, like cinelog30 but 6s capable. This knowledge you shared will come in handy! Thank you!
GEPRC is awesome! The LED lights guards are a nice touch.
Awesome video review! I built my own version of whoop 2.5 from scratch and I'm quite happy with the flight performance. And inside the house, I can fly it really really slow and go inside very tight gaps.
Thanks! For this and many other vids of yours I have enjoyed and learned from.
This is what I've been waiting for in a ciniquad. Ordered! Thanks Lee!
Fantastic flying and review, Lee! 😃
Pretty impressive little quad indeed! The LEDs look sweet!
Anyway, stay safe there with your family! 🖖😊
That was great travelling across the water and a great choice of music. I'm planning on getting this quad.
Curious why the box says link/wasp if it's running the Neb pro/Vista.
Great video. Looks like a promising little cinewhoop. 👍
Thanks lot for the excellent review. Have been googling around on which first fpv to get. By the way, I have been following your channel since I flew rc plane & heli quite some time ago.
Great insights and review as always! I've got a few of the cinelog 25's adapted one with thr foxeer (unbreakable) frame and the speedybee led lights so a miniature version of this and I have the geprc cinelog 35 I think they are top cinewhoops cant decide if this is worth me shelling out for aswell 🤔
Awesome review and great looking quad. I have the Cinelog25 and was looking at this or the Cinelog35 performance.
Excellent video. Can you bind the DJI FPV controller 2 with this whoop?
I have the DJI FPV drone and instead of risking that drone in stunts, I just bought this extra drone for that.
I don't have one to try. Let me know if you get it working... Best of luck
@Painless360 Thanks for the video. What do you think about Cinelog30 after one year in use, how many duct guards have you replaced, is it still flying?
Still loving it. Happy flying
nice cinewhoop. honest review. stay safe lee
Those leds are the best I ve seen
They look even better in real life. Shame they don't come in Orange. My favourite :D
Excellent review..... How can I install a GPS and get the RTH to work when I use it outdoors?.... how far can I go with CRF RX.?.... Thank you.
Excellent review! Thank you! - what do you think about this vs the cinelog 35 6S performance? I’m currently in between these two (or wait for GepRC to release a Cinebot35)
Cinelog35 has more power and makes more noise but flight time is only about 6 mins with a larger battery (11+ mins with this). Cinelog35 is probably a better choice for full sized action cameras but I prefer the longer flight times, improved prop guards, quieter noise and metal camera protection of the Cinebot30. It can be used for more than short filming flights...
@@Painless360you can get 10+ minutes with the cinelog 35 you’ll just need the throttle higher on average. The 35 has wayyyyyy more power and is great for freestyle or cinematic, just change the batteries. Cinebot 30 does the same as the 35 with less power and punch.
Loved the video! Do both the vista nebula pro nano version and Runcam link wasp version - do they both connect to the old DJI fpv controller? I know the link does. The vista I’m confused anymore, does it require the company to do any special wiring for that one to work?
That's what I use here with all of them... Happy flying
GEPRC nailed it... again
its super tempting... love the light too. Just at 450+ Gramms it's sadly not really usable for close-to-people shots... and for everything else I don't really need a cine-quad anyway... Hope we will get a sub 250g with similar performance at some point, too...
Look up the redkyte xdrei
@@DearlBarnes Yeah, saw it. It's a super nice concept
Great video , Big Thumbs up
Great review, wad considering getting a DJI Avata but this seems like great alternative, where can u get them in the UK? What FPV Goggles would you recommend?
Fatshark for analogue and Walksnail or DJI for general HD flying... Happy flying
@@Painless360 thanks for the reply. Where in the UK can u get the Cinebot? Can’t seem to find anywhere that stocks it only US.
Very impressive 👍
I saw a hungry algorithm needing feeding…. Nice drone 👍
I’m stuck between the Cinelog 35 performance or the Cinebot 30. Seems like you like the Cinebot over the other.
I REALLY want a 3.5” prop 6s version!
Hi ! Really great review, like it a lot ☺️👍🏼
But which one between cinebot30 and CL25 only for flying indoor only like houses and business office ? Thank you very much
It depends on the physical size of the quad and flight time you want. You can calm the throttle response on a stronger more powerful quad to make it easier to fly. CineBot30 is my top choice unless there is a compelling reason to go with one of the others are the moment...
I want to buy a cinequad to film outside & inside. I have a fullsize Gopor 11 and I dont want to buy another naked gopro because of the cost. would you suggest the CInebot30 or rather get the Cinelog35? I feel that last one might be a bit to big...
I have a Protek35 that I stopped flying just before Christmas last year. Powerful and a good flyer, it was also very noisy...annoyingly so. I eventually broke the USB port (built in L adapter broke) and I just never bothered with it as I put time into my 5"s and a some sub-250s I picked up. I've been considering reviving it now that I am on DJI and Crossfire (it's analog/RSXR now). Given that I'd need to spend $250 on a Vista/Link and install it, replace a cracked duct, fix the USB on the fc and buy and install CSRF nano, I am thinking this might be a better path in terms of money and effort. It looks great!
Question: Is the LED configurable in Betaflight? Can the color be changed? How does the switch turn it off? I use LEDLOW on an AUX on my other quads where I have installed LEDs to control lights. Sorry for the ?s but I am really considering picking this up.
LED is setup as USER1 in MODES tab to turn on and off. Only one colour from what I can see...
@@Painless360 Thank you!
how did you break the USB? I have the protek35 as well I dont to want to break
@@leaoaugusto I actually do not know. I did have a couple of crashes (one that cracked the prop guards) but one day I went to plug in to change my rates and the USB L adapter felt loose. I could not get my PC to connect to the fc. I also had other drones I was invested in and never bothered fixed it but I had the notion to rehab it recently since I did pay good money for it.
Great Video! How's the quality of the Cinebot guards in terms of durability? I owned two of the CL35 and the guards were absolutely garbage. They would break in the lightest of crashes. How do these lineup in the event of a light to medium crash. Do you think these are resilient enough?
I would say they seem to be better on this... Happy flying
So will it handle a go pro easy enough if using a 1400mah 6s?
Also, what is the pros and cons between the Cinebot 30 03 CRSF or a Cinelog 35 V2 03 CRSF?
I’m fairly new to fpv so would like to get something a bit smaller than my Bob57 for some of my local spots I can fly.
Cheers.
Nice review!! Thanks 😉
Hi man great video 👍. Does this cinebot 30 nebula would work with dji fpv controller 2 and dji goggles 2 or I have to get more expensive one cinebot 30 03 unit. I'm confused which one to get to work with my goggles and controller. Thx
I use it with the original V1 goggles and the original big, square FPV controller. I don't have the other stuff to try. Best of luck!
Nice vid. Does it come with an XT30 option as all my 1100 batteries use that plug, and why doesn’t it have the GEPRC Naked GoOro power cable coming straight off the battery pads on the AIO board (or even better, have it on an aux channel)? That cable should be standard
No XT30 option. See website. Not all pilots fly with gopro... Happy flying
there is a 4S version
do you think this is still a strong contender these days or has something better come about in this segment?
Do you know if its possible to change the color of the light ? :)
thanks for all your videos bye the way. Always good infos :)
No, it isn't. Happy flying
OMG! It's flying better than the Avata😱. LOL
I know right! Not hard to do 😂
nice vid! can u also test it with using 1550 Mah 6s and see how long can it last? do u think its possible to carry it if i m not carrying a gopro on this drone?
I don't have one of those packs to try. Should be OK but the extra weight will affect it.... Happy flying
1550 mah is way too much for this build man. I wouldn't go above 1050mah 6S
Awesome vide review! Can you tell me where you bought the battery for this drone? Thank you!
www.hobbyrc.co.uk/gnb-1100mah-6s-130c-lipo-battery
@@Painless360 Thank you!
I got a question because I'm going to get this drone but I dont know what Headset and controller I should get Ideally Less than 1k as the drone takes around 500, also are you using 6S ELRS 2.4G?
That depends on what FPV and receiver it will have. See my Kit Picks video from August last year on what I recommend..
Awesome review! What flight times you think I could get with a full go pro hero 8black? For some real state and those kinds of flights. Also what about the throttle with a full go pro? Thanks for your time
Not sure, estimated flight times for different setups are on the website, link in description.. best of luck
I haven’t been able to get more than 7 mins without a GoPro. I have a bones so I’ll test it with that. But I don’t think you’ll get more then 4/4.5 min max with a hero 8.
@@Painless360 you thing the DJI controller (the black one that you have there) will be compatible in future with O3 air unit? Thanks!
@@extremeboatdockingmediahow are you liking it? I’m about to buy it as my first cinewhoop, and I’d need it to carry a gopro11mini
This thing is pretty nice... but it is very loud. Which cinewhoops are normally, but this little guy really turns heads.
Agreed. These are not great for flying where you don't want to be noticed!
perfect
Hi, I got mined un assembled, I put everything nice but I have connected the light through the 5 pad bec incledud, I’m not sure how can I manage to turn off lights from switch, I think I should conmect the 5 bec pad to URT can you show the connection you have to the bec and led
I can ask them if there is a wiring diagram when they all get back from CHY if that would help?
Great video,mate. What's your thoughts about wind resistance and indoor flight (stability) when we compare it to Avata? I'm still deciding between this two. I'll specially use my drone for indoors flight but it'll be common I need to fly over the shore (sometimes with a lot of wind). I believe when we are talking about wind, maybe cinebot (specially 6s) is a better option...right? But about hovering or trying not to wobble, is avata a better choice? Tks! CHeers from brazil.
I've not tried the other model... Best of luck
Hi men I have this quad and I only get about 2min off flight time with brand new batteries any ideas why. Thanks in advance no windy conditions
Not sure, I've heard from a few who are getting much shorter flight times... best of luck
I’m tempted to get this one, but analog since I don’t have DJI. Will this handle a full size GoPro?
It should do but it isn't as physically large as the Cinelog35..
Bom vídeo bom cinewoop 👌
Hi, thanks for the video. How does it compare to the cinelog 35 performance the motors on tha one are very powerful
Cinelog35 has more power and makes more noise but flight time is only about 6 mins with a larger battery (11+ mins with this). Cinelog35 is probably a better choice for full sized action cameras but I prefer the longer flight times, improved prop guards, quieter noise and metal camera protection of the Cinebot30. It can be used for more than short filming flights...
I wish the o3 has good low light performance, since the leds is cool at nite
Hi your test flight shown was only around 3 mins. Have you been able to get more than 6 mins?
Awesome CineQuad - It certainly looks like it ticks more boxes than any similar format cine-whoops.
But, and to me it is a BIG but , there is no HDZero option listed
Let us hop they add one soon, having options for PNP/BNF models with the different HD systems is a key part in improving the life of the system..
Nice vídeo, congrats!
Please how did you setup the lights on radio to turn on and of ? I accidentaly deleted the function on betaflight and now the lights are off . Thank you
USER1 mode. See it at the bottom of the modes tab in the video.. Happy flying
@@Painless360 yes man, thank you very much, i think i did something wrong because the lights aren't turning neither on nor of kkkkkk. I would like to put it always on, is there any way? Do you have the default configuration code to use at the comand line? If don't no problem you gave me a lot of information too. Have a nice day.
See the link in the description, I've made a video on the LED light control... I hope it helps
People say they get a around 10 minutes but I'm only getting 3-4 minutes of flight. Using tattoo r line 1200 mah 6s
Could you test fly it with an iFlight 4s 18650 LiION 3000mah pack to see if it will fly longer than with the 6s 1100mah Lipo battery pack. The weight of the 4s 3000mah iFlight LiION pack is same as the 6s 1100mah Lipo pack
If I get a chance I will try.. Happy flying
Can it replace the cinelog 25 for real estate?
Nice review, can this quad fit 4s 3000mah lion battery for long flight time?
How heavy is it?
@@Painless360 it’s 201 grams
Cool idea I’m going to test this
@@extremeboatdockingmedia let me know :) am interested
@@awsstvawsstv2809 it flies but not well. It’s too heavy and you need longer props for better flight time
I have put some 3d print files on thingiverse, have fun 😎
The Peano antenna is a 5.8 Ghz frequency, that higher frequency doesn't penetrate very well so this can't be used in doors, it won't penetrate walls. So this is useless for me.
Works great indoors. ELRS antenna was upgraded after feedback on this review unit. Happy flying!
My cinebot 30 after arming and throttle up, it fly up but when I go throttle down to zero the motor still spin very fast and does not slow down back to the state it was at when arming. When landing it wanted to bounce. Do anyone know how to fix the problem. I'm pretty new to ELRS and not too sure if it some setting in betaflight or the Drone problem or the Transmitter TX16S problem.
Sounds like you're new to this. Check out th-cam.com/video/5NIQguIzO94/w-d-xo.html I hope it helps...
If turn left or right why not look smooth, is there from pid tuned need more tune? Or because of wind?
It was a windy day for that footage but I haven't noticed it so maybe it is a TH-cam thing..
would be nice to compare with cinelog30
Check out my review of that... best of luck
@@Painless360 I mean with the same battery same camera etc...
Hi Lee, does the firmware version on the VTX allow you to flash WTFOS on it ?
Should do... Happy flying!
Will it be able to fly with CHNL pizza 1200 6s batteries?
I don't see why not... Happy flying
How did you get the light to turn on/off with a switch? Can’t figure it out…
Video linked in the description is out at the weekend
10-12 min is that from LiPo or Li-Ion? and is it done with that 1100mah?
Flight times and details on the site: geprc.com/product/geprc-cinebot30-hd-runcam-link-wasp-fpv-drone/
I can only get 5-6 mins with a 1250mah 6s no freestyle. I don’t know how they get 11 mins…
What's the range of this one ... Trying to build one
Depends on the radio system used but almost all 2.4Ghz radio systems can do 1.5km easily.. Happy flying!
How do you set up the lights on a switch? I tried the link in the description but it says it's a private video
Setup USER1 mode in the modes tab. Best of luck
Do you think it would lift more than the cinelog35
Cinelog35 has more power and makes more noise but flight time is only about 6 mins with a larger battery (11+ mins with this). Cinelog35 is probably a better choice for full sized action cameras but I prefer the longer flight times, improved prop guards, quieter noise and metal camera protection of the Cinebot30. It can be used for more than short filming flights...
Vola vene con l'action2?
61% cpu is safe to fly? having same issue here , is it safe? thanks
Yes, flies great!
Please help, My cinebot30 can’t handle the full gopro with 6s 1050mah batteries, anyone have an idea why? Does it need to be fine tuned or not? I ordered from Geprc offcicial website
What does 'can’t handle the full gopro with 6s' mean?
@@Painless360 my cinebot cannot fly on full gopro11.
It can't take off, it's too heavy?
@@Painless360 yes it's too heavy
Was there something you needed to do in bf to get the led working ?
Nope, they are setup out of the box. There is a MODE setup to switch them on and off setup too..
@@Painless360 interesting, mine never turned on although the drone works great
It’s an S6, good for a beginner?
Depends on what you've flown already. An indoor model like a whoop is one of the best things for a new pilot to learn with... Happy flying
I cant manage it to turn off the lights via a switch. Is it even possible to set it up in betaflight? Can anyone help me?
Setup a switch for the Mode1 mode, see 6:45. Best of luck
@@Painless360 I thought user 1 stands for a user profile and therefore removed it directly. Instead, I tested everything possible in Betaflight's LED tab. Many thanks for the help!
what's better overall beginner indoor/ outdoor drone ?? - this cinebot 30 or the cinelog 35?? il have a full size go pro on it (hero 8 or 9) - thank you
Both would be decent choices if you have a little room inside. If you don't then a whoop or similar is a great way to practice safely indoors..
Its really weird how this thing can fly 12min and cinelog35 cant even get close. Its 40 grams of diference but cl35 have bigger props.Weird.
Weight is only one factor on how long a model can fly. See my series on choosing motor and prop setups for endurance over other things.. happy flying!
@@Painless360 I'll search for it. I was thinking about build myself a whoop, like cinelog30 but 6s capable. This knowledge you shared will come in handy! Thank you!
i swear it not quiet at all lol