You probably saved a shit ton of people a headache and down time on their bike. I’ve had my SMR pack in a box for awhile. Just figured I’d burn up stock clutch first. Just went and taped a note to the SMR pack about sharp edges… for later. 😂
Thank you I just installed these clutch packs on my 2019 monkey and 2022 grom. I went back into both and fixed the orientation of the clutch discs and plates.
I appreciate that bro! I’m honestly not too consistent any more with posting videos. For a little while I was better but life has been getting busier and busier haha. With things like this not aren’t so well known and I feel people would really benefit from knowing more about I try and make the time to make these videos though. If life calms down I might try and go more consistent though
It’s amazing how TH-cam tutorials stop after installing intake, exhaust, and cam lol. Everything else seems to be missing. At least 22+. I’ll have to record everything I’m doing and upload it. Like a 5 row cooler with a mnthbx intake because it needs to be modified. But if you want to see how a $30 Amazon exhaust goes in, there’s 1000 videos lol.
Yooo. I appreciate the video. I’m having an issue at the end. It seems like the clutch cable is too long and won’t engage with the clutch properly. I have done everything to the “T” like it is in your video, but the clutch cable is not engaging in the clutches correctly. Like the cable is too long. Would you happen to know what the issue could be?
The bolts can fail of you just run three I just had 2 of the bolts snap on me after installing the 60% springs luckly they snapped off while I was installing it and not while riding.
My man, thanks for the mention 🤜💥🤛 Great vid. I had never heard of matching up the smooth and rough sides before. I'll be sure to do that from now on though 💪🤘
i know this videos a year old but it did help me but im hoping somebody can help me with my issue i installed smr discs and springs with chimera clutch plate and they work good but im having issues shifting to second at low speeds and getting into neutral at a stop its like the shifter keeps getting jammed or something i also adjusted the clutch cable already and that doesn’t seem to be the issue. Thanks
Hey man what happens if you get a 2019 pressure plate on a 2022 grom? I just ordered all this stuff and when I install the clutch assembly bolt it all back together I get like a dead head on the clutch actuator like the plunger isn’t even touching the throwout bearing
What’s up bro I’m sorry I’m just seeing this! So funny story I bought a 2022 clutch pressure plate but received a 2019 and didn’t realize it until 2 days of me fighting it and not getting the clutch to work. The lever was just completely dead and had no tension no matter what I did. Nothing is really gonna happen it just won’t work. I installed that one like 20 different times trying to get it to work til I figured out the problem and put the stock one back in lol
I just installed it and its hard to find neutral and shift to second gear. I did the oil pump as well. seems like the clutch is dragging a little. any thought on this?
Hell yeah my man Terry! He’s like me with his Grom, always got something going on 😂 hopefully this helps save you guys a bit of headache. Definitely check the plates when you mount it back on the shaft too cause sometimes they like to get caught up and stick up and it’ll warp them. I actually made that mistake twice and forgot to mention it 😵💫
Is there a specific order that the discs need to go in? For example my ktm has different thickness plates and the thinner go on the outsides and thicker in the middle. Or just make sure the edges face this way? TIA🤘
That sounds like exactly what mine was doing when the clutch disks weren’t racing the right way. The edges have a sharp and round edge and you want the round to shed facing eachother
The only problem is that when I have all discs in it, don't sit flush. Maybe because the stock was only 5, it would sit flush now. There is a lip, but I know it's in place
@@tonyromo4778 there is a small gap from what I remember but it should sit well. Sometimes I would get it together as much as I can then sand which the assembly in my hands and spin it around to make sure everything is clicked in and fully seated
By far, the best drum clutch video I have ever seen in my entire life thank you
You probably saved a shit ton of people a headache and down time on their bike. I’ve had my SMR pack in a box for awhile. Just figured I’d burn up stock clutch first. Just went and taped a note to the SMR pack about sharp edges… for later. 😂
Same I race my 23 grom and have 9700 miles and its getting about time. Constantly hard shifting slamming through the gears but that's Racing
Very helpful video and glad you didn’t skip ahead I needed to see each step thanks
Thank you I just installed these clutch packs on my 2019 monkey and 2022 grom. I went back into both and fixed the orientation of the clutch discs and plates.
DUDE!! Tremendous job.. you saved my grom.. new clutch works perfectly now
This is my first time change this things
Really thank u !
Without your video I won’t finish this
Thank you bro !
Thank you for this! Have been fighting this issue for so long. Going to try this
I might have watched the video three times, but I got it right the first time. Thanks for the tips bro!
Great install guide! Surprised there's so few views! Must not be a lot of us out there yet with this kit.
I appreciate that bro! I’m honestly not too consistent any more with posting videos. For a little while I was better but life has been getting busier and busier haha. With things like this not aren’t so well known and I feel people would really benefit from knowing more about I try and make the time to make these videos though. If life calms down I might try and go more consistent though
@@egoboost9952 I plan on keeping my Grom for the long haul so if you keep posting I'm sure I'll see them 😁
Thank you for this. Very helpful now knowing about the edges.
It’s amazing how TH-cam tutorials stop after installing intake, exhaust, and cam lol. Everything else seems to be missing. At least 22+. I’ll have to record everything I’m doing and upload it. Like a 5 row cooler with a mnthbx intake because it needs to be modified. But if you want to see how a $30 Amazon exhaust goes in, there’s 1000 videos lol.
Well guess I have to take it apart for the 5th time. Everything you said happening to me. I noticed those edges but didn't think nothing of it.
At least you noticed in the first place. I had no idea at first, I feel like that’s the case with most people. Hopefully this helped your issue
@@egoboost9952 si running good now thanks for making this video
Yooo. I appreciate the video. I’m having an issue at the end. It seems like the clutch cable is too long and won’t engage with the clutch properly. I have done everything to the “T” like it is in your video, but the clutch cable is not engaging in the clutches correctly. Like the cable is too long. Would you happen to know what the issue could be?
Great video!!! Burned my clutch out with only 500 miles on the bike. Do I have to have that gear tool? Thanks
The bolts can fail of you just run three I just had 2 of the bolts snap on me after installing the 60% springs luckly they snapped off while I was installing it and not while riding.
My man, thanks for the mention 🤜💥🤛 Great vid. I had never heard of matching up the smooth and rough sides before. I'll be sure to do that from now on though 💪🤘
🤩
Helped alot thanks man
i know this videos a year old but it did help me but im hoping somebody can help me with my issue i installed smr discs and springs with chimera clutch plate and they work good but im having issues shifting to second at low speeds and getting into neutral at a stop its like the shifter keeps getting jammed or something i also adjusted the clutch cable already and that doesn’t seem to be the issue. Thanks
Hey man what happens if you get a 2019 pressure plate on a 2022 grom? I just ordered all this stuff and when I install the clutch assembly bolt it all back together I get like a dead head on the clutch actuator like the plunger isn’t even touching the throwout bearing
What’s up bro I’m sorry I’m just seeing this! So funny story I bought a 2022 clutch pressure plate but received a 2019 and didn’t realize it until 2 days of me fighting it and not getting the clutch to work. The lever was just completely dead and had no tension no matter what I did. Nothing is really gonna happen it just won’t work. I installed that one like 20 different times trying to get it to work til I figured out the problem and put the stock one back in lol
I just installed it and its hard to find neutral and shift to second gear. I did the oil pump as well. seems like the clutch is dragging a little. any thought on this?
Doing this maybe this weekend with terry otherwise known as someoneyouknow 😅
Hell yeah my man Terry! He’s like me with his Grom, always got something going on 😂 hopefully this helps save you guys a bit of headache. Definitely check the plates when you mount it back on the shaft too cause sometimes they like to get caught up and stick up and it’ll warp them. I actually made that mistake twice and forgot to mention it 😵💫
@@egoboost9952 thank you for the tip. 🤜
Do you really need that gear tool? If so where do you get it? I can’t find it
I got mine off eBay for like $40 with free shipping
What a g
Is there a specific order that the discs need to go in? For example my ktm has different thickness plates and the thinner go on the outsides and thicker in the middle.
Or just make sure the edges face this way?
TIA🤘
Weird, followed this to a T.
Clutch disc orientation correct.
Tough time shifting 1 to 2. And 2 down to 1😅
Man I taking my clutch out like 5 times now still smr clutch not working for me 😢
Did you have trouble when shifting down . My bike wont go into neutral and it hard to downshift . Can you help
That sounds like exactly what mine was doing when the clutch disks weren’t racing the right way. The edges have a sharp and round edge and you want the round to shed facing eachother
I did them exactly like the video, the rough side down, and the round edge up
The only problem is that when I have all discs in it, don't sit flush. Maybe because the stock was only 5, it would sit flush now. There is a lip, but I know it's in place
@@tonyromo4778 there is a small gap from what I remember but it should sit well. Sometimes I would get it together as much as I can then sand which the assembly in my hands and spin it around to make sure everything is clicked in and fully seated
I did everything right, but It still hard to shift down and once I'm in 1st it won't even go up to neutral. But shifts really good in all gears