While you have the window out, you may want to consider building a header that runs the length of the old window and set it in place against the top plate of the wall. Then jack the header up, to remove the sag in the top plate, until it is level and touching the plate all the way across the opening. That will also help with any sag you may have in the roof in that area. Just be sure to jack it up slowly to prevent excessive stress on that old lumber. Slow and steady wins the race lol.
Sometimes you just gotta do what you gotta do. Years down the road you'll be grateful for modernizing these windows. Great choice in hunting around for a better deal. Well done!
Wes I really enjoy your content. Your whole channel is a treasure that your son will one day be able to enjoy, watching his dad bring him up in a Godly way, and an example of how to live and raise his own. God bless you man have a Merry Christmas
I feel your pain. I am in the process of remodeling a house and every time I try to fix one thing, I open a can of worms with five other problems. You know, stuff like studs not on 16" centers, missing studs, siding nailed to places where there are no nailers to nail to, rafters cut in half, just because. Etc. Etc. Etc. I don't believe there is a single square wall or floor anywhere. Oh well. Keep on keeping on, brother.
Hey Wes know exactly what your going through my first home was over 100 years old. I found the same issues when I remodeled it. The worst was replacing rotten foundation in master bedroom. When was built they just dug narrow trenches to lay foundation sills right into ground. I spent days wheelbarrowing dirt through the house and out front door. Just to rebuild a new foundation above ground level. Just one of many Pandora boxes I uncovered.
Wes... My go to solution for home renovations is Habitat for Humanity Restore. I bought about 5000 dollars worth of windows and doors for less than 800 dollars. All were double pane and high impacted resistant. All were new since they get donations from Home Depot and Lowes.
The added benefit of windows that open will be when you are able to use them for cross ventilation. We did something similar on our large window wall and the added ventilation has made the whole house more comfortable during the few heat episodes we get in the summer.
Hello Wes. I think this may have been the first time I have seen your porch and what a great one it is for maybe watching the wildlife. The combination lock on the door is like one I found in my shed. With four tumblers, there would only be 10,000 possibilities so I did not throw it away. I had to start somewhere, so I started by lining it up the numbers at 0000 which would make it easy to keep up where I was in this effort to "crack" the lock. It opened on the first number, yes, 0000. I had hoped you would be able to successfully remove the window, but double insulated windows were a great choice and find. Have good days!
Hi Wes. In my country is a spanish saying witch says (in spanish) "no hay mal que por bien no venga". IDK if you speak spanish or not, but the overall meening translation would be "good things come out from bad situations". By opening that "Pandora box" you almost did all the tedious work to install your new AND BETTER windows in almost no time; special mention the time of the year when an open wall to the elements is not recomendable, so the quicker, the better. As some say..."happy wife... happy life". I admire your hard working and dedication to all the numrous items you have to attend in the farm. As always, cheers from NE Patagonia, Argentina, and BTW: Marry Xmas and a HNY to you and your family.
I don't know if it's too late to say anything, but my dad being the master carpenter that he was; would get a beam or something under that ceiling as close to the wall as he could and jack that thing up to relieve the pressure on that window. Then build up the proper header for it. Adding extra jack studs and all would be a plus. Then you could nail it all up, tying it all together. You need to get the pressure off that window and at the same time; get it all plum and straight. I hope this is not too late and helpful.
Hi Wes. Yes you made the best decision, that window frame was toast. apart from the lintel being flat - which you were aware off. the window frame was built wrong with no centre mullion (vertical timber) the glazing beads too narrow. replacing it with heavier frames was your best option I have been been fabricating timber windows for 40 years and I am surprised that window frame lasted as long as it did. All the best have a good xmas and new year from Scotland
The window has been load bearing. Temp shoring inside and out. Hydraulically lift the center of the top plate. Once the top plate is back to level, reframe with a 2 x 8 header. The window can not possibly go back to flat as long as it is load bearing.
When we moved into our house the windows were so bad that when the wind would blow the curtains would move. I replaced 12 windows with insulated glass windows and the savings in heat cost have more than paid for it over the years. It does get cold where you live, replacing your windows is the right choice. I spent five months at Fort Gordon during the winter months and it snowed about two inches there. The crazy nuts from Florida had never seen snow before and were outside rolling in it.
One thing I would check before you put in new windows, is the foundation. If it is weak on that wall you could just have more trouble down the road. Getting two new windows was a good move. Remember the foundation and the roof are the most important parts of the house. I know you understand that a good foundation in life is the most important thing you can provide for your family, works the same for your house. God Bless.
Very good solution Wes, you made the right decision. There’s no way you could save the previous window. So glad you are honest with yourself In admitting this mistake. That’s the main reason that I subscribe and watch your channel.
“let the priests take it for themselves, each from his acquaintance; and they shall repair the damages of the house wherever any damage may be found.” - Kings 12:5 I am impressed and inspired by your work and results! Merry Christmas to you and your family!
Great news on the window. If you went to where I think you did to get them, they get window deliveries by the truckload every month or so. They are factory overruns and brand new windows. Happy for you.
Back when I done windows in my house some were trying to get me to go with replacement windows as to replacing the whole unit. I actually saved money and time by replacing the whole unit. Awesome video. 👍👍👍
I reckon a window' each end, and a sliding/swinging (French Doors) door in the middle. Give great access to that little area outside, and allow that living area to spill outside. You've got to replace it anyway.......
Putting support between the windows will allow you to straighten the top plate if you do it slowly to not break anything. I think you made the best choice as straightening windows is near impossible.
If you put tape, like masking tape or painter's tape in an X across the window pane, it prevents them from breaking during removal. It worked on a mirror for me, but I'm not DIY-ing windows (i hope) any time soon.
Nice job Nice to see thrifty people are still out there and the little guy can still make a buck or two. Could you put the name of surplus store in the description as for I will be needing some affordable windows in à upcoming project down here in North Florida. Thanks and love the channel.
It`s the right call, any more bowing on that single pane, it was gonna break, now you can box em in nice and sturdy. Hey I have no problem with buying new, older windows, they clean up easy.
Wes .... EYE PROTECTION. You are right there with all that glass in front of you. It is great that you draped behind the window on the inside of the house, I assume in case any of the glass breaks. But, you should always be wearing eye protection. I know there have not been any mishaps that eye protection would have saved you from serious injury, and you have been lucky on that count. But, please, make it a habit of protection your eyes ..... or maybe your entire face with some sort of a face shield .... if for no other reason than to set an example for your "mini me".
When I was a kid, my Dad would buy the ugliest tree on the lot. We'd bring it home, and he'd cut branches from the back of the tree, drill holes in the trunk, and reinsert the branches he cut off. We'd end up with a one-sided tree that sat flush against the wall. Was too cool.
I'm guessing you're planning to enclose the deck next year. Gives you room to grow. Not reading too much into this am I? Looking forward to see how you finish this stage of the build.
Sounds like you got a deal on them windows. I was thinking probably take the glass out of the old window and then see if you could straighten the frame But maybe it's best to do what you are going to do.
hello wes & it's is randy and i like yours video is cool thanks wes friends randy & Merry Christmas To Family wes & Happy New Year's & Best in the New Yea's ,,,,,,, 2024 randy
Take the window out and be done with it. Life will go on. Harvey windows have a history of losing the seal on the double panes allowing moisture in. Check it out.
Good idea to put a support between the two windows. This will help with the sagging above. Is it possible to jack up the top a bit? I think you made the best decision.
Perhaps you can remove all of the glass and then put it on a flat surface and try to push it back straight then you can salvage it fot a greenhouse or a wind guard in your sawmill I am under the impression this is a family heirloom perhaps it was your father's or grandfathers who made is window
It's possible to install the header against the top plate and jack it up ever so slowly. Is this a load bearing wall? I think so if my recollection is correct.
Hi Mr. Green Jeans. You should know that when Zeus stuffed Pandora's Box with the ills of the world, he also placed a gift at the bottom of the box. When he gave Pandora the box he warned her not to open it, but curiosity got the best of her and she opened the box, and unleashed all the ills, disease, and misery on the world as she knew it. When the box emptied out, there was one more gift inside. From the depths of the box rose HOPE. Because Zeus, in his anger, thought to himself that the world would need something to get through disease, hardship, and misery and that would be HOPE. Zeus might have been angry and wanted revenge on Prometheus, but he also had compassion as well. Did you also know that there is a parallel in the Pandora myth and the Creation of Eve, in the Garden of Eden ??
I came here for construction information and maybe a few conspiracy theories. Your moral lessons and historical information are NOT welcome. Please unsubscribe me from any newsletter you write for.
You didn't have to read the entirety of @jeremy's comment and saved yourself the agony of reading something interesting. Go with the flow zippy ..... it is much easier to enjoy life as it comes to you rather that find fault with what's around you. @@zippy-zappa-zeppo-zorba-etc
Playlist for the remodel: th-cam.com/play/PLaBQOQZRG5lFxN_aJ3MNgvbTzsfTHvZNa.html.
While you have the window out, you may want to consider building a header that runs the length of the old window and set it in place against the top plate of the wall. Then jack the header up, to remove the sag in the top plate, until it is level and touching the plate all the way across the opening. That will also help with any sag you may have in the roof in that area. Just be sure to jack it up slowly to prevent excessive stress on that old lumber. Slow and steady wins the race lol.
Sometimes you just gotta do what you gotta do. Years down the road you'll be grateful for modernizing these windows. Great choice in hunting around for a better deal. Well done!
Wes I really enjoy your content. Your whole channel is a treasure that your son will one day be able to enjoy, watching his dad bring him up in a Godly way, and an example of how to live and raise his own. God bless you man have a Merry Christmas
Glad you took everyone’s advice! Those windows will be so much more efficient and great for letting in the summer breezes.
I feel your pain. I am in the process of remodeling a house and every time I try to fix one thing, I open a can of worms with five other problems. You know, stuff like studs not on 16" centers, missing studs, siding nailed to places where there are no nailers to nail to, rafters cut in half, just because. Etc. Etc. Etc. I don't believe there is a single square wall or floor anywhere. Oh well.
Keep on keeping on, brother.
Sounds like my house. I feel your pain
Patience is a virtue, & you've definitely got it!! Great job, Wes!! God bless you and your family. This, too, shall pass, & you will succeed!! ❤️🙏❤️
Hey Wes know exactly what your going through my first home was over 100 years old. I found the same issues when I remodeled it. The worst was replacing rotten foundation in master bedroom. When was built they just dug narrow trenches to lay foundation sills right into ground. I spent days wheelbarrowing dirt through the house and out front door. Just to rebuild a new foundation above ground level. Just one of many Pandora boxes I uncovered.
Wes... My go to solution for home renovations is Habitat for Humanity Restore. I bought about 5000 dollars worth of windows and doors for less than 800 dollars. All were double pane and high impacted resistant. All were new since they get donations from Home Depot and Lowes.
The added benefit of windows that open will be when you are able to use them for cross ventilation. We did something similar on our large window wall and the added ventilation has made the whole house more comfortable during the few heat episodes we get in the summer.
Plus it looks like you'll be able to open these ones in warmer weather ... yayyy fresh air is always a bonus
Well done Wes👍👍👍. Thank you for sharing. Be safe 🇨🇦
Good content, brother. Making hella progress.
Being able to open those new windows up in the spring and fall to let the breeze though is going to be SOOO nice.
Hello Wes. I think this may have been the first time I have seen your porch and what a great one it is for maybe watching the wildlife. The combination lock on the door is like one I found in my shed. With four tumblers, there would only be 10,000 possibilities so I did not throw it away. I had to start somewhere, so I started by lining it up the numbers at 0000 which would make it easy to keep up where I was in this effort to "crack" the lock. It opened on the first number, yes, 0000. I had hoped you would be able to successfully remove the window, but double insulated windows were a great choice and find. Have good days!
Hi Wes. In my country is a spanish saying witch says (in spanish) "no hay mal que por bien no venga". IDK if you speak spanish or not, but the overall meening translation would be "good things come out from bad situations". By opening that "Pandora box" you almost did all the tedious work to install your new AND BETTER windows in almost no time; special mention the time of the year when an open wall to the elements is not recomendable, so the quicker, the better. As some say..."happy wife... happy life".
I admire your hard working and dedication to all the numrous items you have to attend in the farm.
As always, cheers from NE Patagonia, Argentina, and BTW: Marry Xmas and a HNY to you and your family.
Well done Wes! I’m looking forward to seeing your finished project 👏🏻
I don't know if it's too late to say anything, but my dad being the master carpenter that he was; would get a beam or something under that ceiling as close to the wall as he could and jack that thing up to relieve the pressure on that window. Then build up the proper header for it. Adding extra jack studs and all would be a plus. Then you could nail it all up, tying it all together. You need to get the pressure off that window and at the same time; get it all plum and straight. I hope this is not too late and helpful.
Hi Wes. Yes you made the best decision, that window frame was toast. apart from the lintel being flat - which you were aware off. the window frame was built wrong with no centre mullion (vertical timber) the glazing beads too narrow. replacing it with heavier frames was your best option
I have been been fabricating timber windows for 40 years and I am surprised that window frame lasted as long as it did. All the best have a good xmas and new year from Scotland
Glad you found new windows . You got them at a good price , better than $800 . They ate double pane and you can open them . Good job .
Merry Christmas. You knocked that one outta the park!
I really enjoy your videos. Great story telling.
God bless. Merry Christmas
It’s going to look great! Thanks for sharing! 😊
Great find! Blessings!
Good decision, it'll be a great replacement for the bowed window.😊❤
The window has been load bearing. Temp shoring inside and out. Hydraulically lift the center of the top plate. Once the top plate is back to level, reframe with a 2 x 8 header. The window can not possibly go back to flat as long as it is load bearing.
Love the videos keep them coming.
When we moved into our house the windows were so bad that when the wind would blow the curtains would move. I replaced 12 windows with insulated glass windows and the savings in heat cost have more than paid for it over the years. It does get cold where you live, replacing your windows is the right choice. I spent five months at Fort Gordon during the winter months and it snowed about two inches there. The crazy nuts from Florida had never seen snow before and were outside rolling in it.
One thing I would check before you put in new windows, is the foundation. If it is weak on that wall you could just have more trouble down the road. Getting two new windows was a good move. Remember the foundation and the roof are the most important parts of the house. I know you understand that a good foundation in life is the most important thing you can provide for your family, works the same for your house. God Bless.
Nice work, can’t wait to see it finished.
Very good solution Wes, you made the right decision. There’s no way you could save the previous window. So glad you are honest with yourself In admitting this mistake. That’s the main reason that I subscribe and watch your channel.
Been in a similar spot before. Going with new windows is wise. Looking for a good deal is even more wise.
Great vid Wes ! I hope you and your family have a great Christmas.
“let the priests take it for themselves, each from his acquaintance; and they shall repair the damages of the house wherever any damage may be found.” - Kings 12:5
I am impressed and inspired by your work and results!
Merry Christmas to you and your family!
Great news on the window. If you went to where I think you did to get them, they get window deliveries by the truckload every month or so. They are factory overruns and brand new windows. Happy for you.
Those are going to be a lot better.
MM77 Approved 👍🏼👍🏼……………………………………………………………………………..Remember,the only thing left in Pandoras Box was HOPE. So you’ve always got Hope!!
Back when I done windows in my house some were trying to get me to go with replacement windows as to replacing the whole unit.
I actually saved money and time by replacing the whole unit.
Awesome video. 👍👍👍
That's a good idea too, maybe I'll just Google used windows around my area too,thanks Wes, God bless brother
Better to have double pane windows. Will be a nice improvement.
Nice brand of window!!!!!!!
Good job ! Good luck!
Good save Wes !
I reckon a window' each end, and a sliding/swinging (French Doors) door in the middle. Give great access to that little area outside, and allow that living area to spill outside. You've got to replace it anyway.......
Putting support between the windows will allow you to straighten the top plate if you do it slowly to not break anything. I think you made the best choice as straightening windows is near impossible.
If you put tape, like masking tape or painter's tape in an X across the window pane, it prevents them from breaking during removal. It worked on a mirror for me, but I'm not DIY-ing windows (i hope) any time soon.
I have an 85 old farm house and I feel your pain. Just have patience!
Great job!
Very good solution Wes
Looking forward to see you fix the window problem (Even it's not Microsoft, Windows got problem!)
Nice job
Nice to see thrifty people are still out there and the little guy can still make a buck or two. Could you put the name of surplus store in the description as for I will be needing some affordable windows in à upcoming project down here in North Florida.
Thanks and love the channel.
Thanks! It's Salvage Depot in Griffin, Ga.
hey bro jack the ceiling up too relieve the load on the window
Put a good header above the window, and screw the top window frame to it from underneath to pull it back into place. 😊
It`s the right call, any more bowing on that single pane, it was gonna break, now you can box em in nice and sturdy. Hey I have no problem with buying new, older windows, they clean up easy.
WOW 🖐👍❤🌲
Wes .... EYE PROTECTION. You are right there with all that glass in front of you. It is great that you draped behind the window on the inside of the house, I assume in case any of the glass breaks. But, you should always be wearing eye protection. I know there have not been any mishaps that eye protection would have saved you from serious injury, and you have been lucky on that count. But, please, make it a habit of protection your eyes ..... or maybe your entire face with some sort of a face shield .... if for no other reason than to set an example for your "mini me".
Always something to do.
When I was a kid, my Dad would buy the ugliest tree on the lot. We'd bring it home, and he'd cut branches from the back of the tree, drill holes in the trunk, and reinsert the branches he cut off. We'd end up with a one-sided tree that sat flush against the wall. Was too cool.
You know you saved $380 in getting the two surplus windows! You can use the saving for another bag of feed corn and gas for the trip. ;)
Good luck with the windows. Stay safe.
on that window sandwich it between 2 sheets of 3/4 plywood and use clamps with 2/4 on edge and press the window back flat over a couple weeks
Considering that I’m all in for replacing the entire wall…wha your plan now was really economical and a great idea! :)
I'm guessing you're planning to enclose the deck next year. Gives you room to grow. Not reading too much into this am I? Looking forward to see how you finish this stage of the build.
Sounds like you got a deal on them windows. I was thinking probably take the glass out of the old window and then see if you could straighten the frame But maybe it's best to do what you are going to do.
Wise choice plate glass needs to go
hello wes & it's is randy and i like yours video is cool thanks wes friends randy & Merry Christmas To Family wes & Happy New Year's & Best in the New Yea's ,,,,,,, 2024 randy
Would you be able to jack the wall over the window from the outside to relieve the weight until you get it reframed?😮
Reframe that entire wall for a new window by temp supporting trusses and ridges with 4x4s. Demo old wall and reframe for new window
You should of jacked the ceilting rafters to straighten the sag
It might cost you a little bit of 💵 but that window needs to go now...Also, if the top plate is STEEL, it'll never sag...Just a thought...
Take the window out and be done with it. Life will go on. Harvey windows have a history of losing the seal on the double panes allowing moisture in. Check it out.
I know you hate that but it will look good!!
Good idea to put a support between the two windows. This will help with the sagging above. Is it possible to jack up the top a bit? I think you made the best decision.
Ya tried. I guess it's too big to install on the chickens' house.
ITS PROBABLY TOO LATE NOW, MAYBE USE SLIDING DOORGLASS REPLACEMENTSAND JUST BUILD A FRAME
hope this helps with the widows.Thanks!
That's great! Thank you!
Perhaps you can remove all of the glass and then put it on a flat surface and try to push it back straight then you can salvage it fot a greenhouse or a wind guard in your sawmill I am under the impression this is a family heirloom perhaps it was your father's or grandfathers who made is window
It's possible to install the header against the top plate and jack it up ever so slowly. Is this a load bearing wall? I think so if my recollection is correct.
😃
I believe you could of pulled the window out rebuilt all 4 sides right and reinstalled it.
I watched a 5 yr old video where you cut sweet gum and wondering how it turned out
I hate to tell you, the Box was opened a long time ago. Haha
Saving money for someone? Is the Mrs. pregnant? ❤🎉
Hi Mr. Green Jeans. You should know that when Zeus stuffed Pandora's Box with the ills of the world, he also placed a gift at the bottom of the box. When he gave Pandora the box he warned her not to open it, but curiosity got the best of her and she opened the box, and unleashed all the ills, disease, and misery on the world as she knew it. When the box emptied out, there was one more gift inside. From the depths of the box rose HOPE. Because Zeus, in his anger, thought to himself that the world would need something to get through disease, hardship, and misery and that would be HOPE. Zeus might have been angry and wanted revenge on Prometheus, but he also had compassion as well. Did you also know that there is a parallel in the Pandora myth and the Creation of Eve, in the Garden of Eden ??
I came here for construction information and maybe a few conspiracy theories. Your moral lessons and historical information are NOT welcome. Please unsubscribe me from any newsletter you write for.
You didn't have to read the entirety of @jeremy's comment and saved yourself the agony of reading something interesting. Go with the flow zippy ..... it is much easier to enjoy life as it comes to you rather that find fault with what's around you. @@zippy-zappa-zeppo-zorba-etc
I think there's a new 🍼 baby on the way. Just a hypothesis.
1st
trump or biden?