Install Raid for Free ✅ IOS/ANDROID/PC: t2m.io/R_BobbyFerreiraBuilds and get a special starter pack with an Epic champion ⚡Tallia⚡ Available only for new players
Robbie if I was to own this body kit I would plastic weld the 2 side skirt pieces together (from the inside) then put bondo over the outside to cover the gap this will make it strong so the bondo doesn’t crack and it would make the side skirts look 11/10 it is just an idea I’m sure you could figure something out as good if not better
The gap. On the rocker. Panel bond it together and turn it into a 1 pice. If it don’t turn out perfectly. Or have some pin holes. Use glazing to fill the rest.
Just discovered this channel!! Been a subscriber to the original channel years ago. Was so suprised to see the Genesis again. Time to binge on the videos i missed out!!
From the way the side skirt is made it really looks like they intended for the bottom curl of the stock piece to be trimmed off. Plus I feel like that would help pull the small gap by the rear wheel in
For the rear maybe do what you did on the drift Jenny and do a bumper cutout with a bash bar. Or maybe a bumper cutout showing a nice exhaust setup. Or even a huge diffuser
My gen is that blue color, it's called acqua minerale blue & it's one of the more rare colors for the gen as it only came on the bk1 & not as many are out there👍🏻 the N performance blue would look so good🔥
I thought those Amazon special bolts on the eg rusted over lol ? Also not sure if this helps but I heard the trade secret for filling gaps when comes to body kits is silicone caulk believe it or not. I hear it fill in gaps better than the plastic trim😉
I really like this kit and for the price its hard to beat, it looks like it fits pretty damn well too. But i also really appreciate the time and effort you put into the videos and how much you try on your cars. There is alot of car content on TH-cam where people just dont try to actually build things the best just to get out videos or get attention or just to keep things going but its awesome that you will take the time to do things right and to your best ability no matter what and then on top of that explain as good as you can too and idk just really truly tr. It sounds dumb but its the truth and its noticable so good shit👍👍
I’ve always preferred the way molded wide body kits look. Nothing wrong with what you got going right here, I just find them so much more aesthetic when they’re molded. No rivets, no bolts showing, just body conforming
They make some pretty sweet looking aftermarket front bumpers for the bk1 genesis’s should maybe look into some aftermarket bumpers to make the rest of the car look as sharp as the widebody kit. Stoked to see this thing finished gonna be sweet!!
Kinda wish there was a way to make it sound less hollow. Like spray foam filler stuff or somethin lol. Fun video tho! Kinda wish there was a full video of when you got it and towed it in and all that. Looks like there was only a short version of that?
the widebody kit looks very good, to make the front and rear look better, there is a brand called ARK Performance they make very nice diffusers but its a bit to the expensive side though
Man, seeing so many cars with amazing wife idy kit options makes me jealous since the P2 S60 doesn't really have much even for body kits in general, aside from a few front lip kits and ground effect kits.
Thank you for the links to all of the supplies needed in the description but I couldn’t find the link for the wide body kit, can that be posted also please and thank you. 👍
That gap can be filled like all Wide body work it's supposed to be one with the car so filled to the body and that way you can't tell where the body kit starts and the car ends
You can get some aquatic foam for fish tanks to fill that gap in the rear for the sideskirt. Just shove it into the gap. Don't need to shave it or anything beforehand
hey robbie, I've loved watching these video's of you rebuilding the genesis coup because I've always wanted to do something like this especially with this exact car and I was hoping to know around how much you've spent so far on the car
So after you installed this kit to confirm the fit you took it all back off right and did the wrap on the car and wrapped each individual piece of the kit right??
I met Robbie recently and he will forever be my favourite content creator he is so respectable for everything he does with his cars, content, and fans. Forever love❤
hello i am in the same position as you thinking about saving a 2011 if the price is fair im also Canadian just wondering do you order eveything on line i want to do the same thing would appreciate any pointers you can give and i will keep watching you videos for sure thank you
Ive always thought itd look 10 times cleaner if someone filled all the grooves and the joints etc and sanded the body kit in so it turns it into a factory looking wide body kit. Never seen it done but it would be sweet
Install Raid for Free ✅ IOS/ANDROID/PC: t2m.io/R_BobbyFerreiraBuilds and get a special starter pack with an Epic champion ⚡Tallia⚡ Available only for new players
How and where did you find this car for 1,000$
@@Esco456 there is an entire video of it you can watch! It was before I split my channels, so it’s on the Robbie Ferreira channel
@@BobbyFerreiraBuilds thanks buddy will check it out
Robbie if I was to own this body kit I would plastic weld the 2 side skirt pieces together (from the inside) then put bondo over the outside to cover the gap this will make it strong so the bondo doesn’t crack and it would make the side skirts look 11/10 it is just an idea I’m sure you could figure something out as good if not better
I had the same idea. Just make the 2 piece a 1 piece
Using fiberglass reinforced filler would help the case even more. Even better chance for it to not crack
Fibre glass is better then bondo in this application bondo will crack and flake off look at most people’s patch jobs within a year or 2
I’d panel bond them together an then fill with filler an hard mount everything to keep from cracking.
Exactly what I was about to comment
"Not being 17 different colours"
I was looking forward to the harlequin build
16:40 USE rubber rivet
The gap. On the rocker. Panel bond it together and turn it into a 1 pice. If it don’t turn out perfectly. Or have some pin holes. Use glazing to fill the rest.
Just discovered this channel!! Been a subscriber to the original channel years ago. Was so suprised to see the Genesis again. Time to binge on the videos i missed out!!
Had a monster service widebody bk2 and picking up a bk1 tmr. Kinda like seeing new bk1 content!
I’ve only seen like 4 k series swap on these cars and it’s nice to see someone documenting the whole build
From the way the side skirt is made it really looks like they intended for the bottom curl of the stock piece to be trimmed off. Plus I feel like that would help pull the small gap by the rear wheel in
For the rear maybe do what you did on the drift Jenny and do a bumper cutout with a bash bar. Or maybe a bumper cutout showing a nice exhaust setup. Or even a huge diffuser
The one blue fender got me thinking, Hyundai N performance blue would look so sick with the wodebody.
My gen is that blue color, it's called acqua minerale blue & it's one of the more rare colors for the gen as it only came on the bk1 & not as many are out there👍🏻 the N performance blue would look so good🔥
Cut off the black bottom piece from the rear bumper and make a crazy aggressive diffuser for the rear. I think that would look insane!
I thought those Amazon special bolts on the eg rusted over lol ? Also not sure if this helps but I heard the trade secret for filling gaps when comes to body kits is silicone caulk believe it or not. I hear it fill in gaps better than the plastic trim😉
Thanks for the videos Robbie, I really enjoy all of them! Keep doing that!
What we did where i worket with rivnuta in plastic was to use washer on the underside so it was a bigger circle underneeth and they could pull out
Widebody installations are always fun to watch.
I really like this kit and for the price its hard to beat, it looks like it fits pretty damn well too. But i also really appreciate the time and effort you put into the videos and how much you try on your cars. There is alot of car content on TH-cam where people just dont try to actually build things the best just to get out videos or get attention or just to keep things going but its awesome that you will take the time to do things right and to your best ability no matter what and then on top of that explain as good as you can too and idk just really truly tr. It sounds dumb but its the truth and its noticable so good shit👍👍
I’ve always preferred the way molded wide body kits look. Nothing wrong with what you got going right here, I just find them so much more aesthetic when they’re molded. No rivets, no bolts showing, just body conforming
Yes some early 2000's molded kits with fender flares actually looks dope. But you must have the fender flares otherwise they look so bad...
I really like that you use protective gear 👍👍
I love this genesis content bro I really enjoy watching, keep doing genesis coupe content
Atlas you’re back 💯🔥🔥🔥
a roll cage bumper thing would look agrressive
They make some pretty sweet looking aftermarket front bumpers for the bk1 genesis’s should maybe look into some aftermarket bumpers to make the rest of the car look as sharp as the widebody kit. Stoked to see this thing finished gonna be sweet!!
an air powered rivnut gun would have been ideal for this project! great vid once again Bobby
Robbie, I would say if you got a carbon fibre diffuser it should give you that extra bit of Gerth your looking for.
My thoughts exactly! An ARK carbon rear diffuser would look awesome with the wide body IMO
Kinda wish there was a way to make it sound less hollow. Like spray foam filler stuff or somethin lol. Fun video tho! Kinda wish there was a full video of when you got it and towed it in and all that. Looks like there was only a short version of that?
Wrap it and put spacers and wide wheels , do 19/30/325 on the rear ,
Can graft the side skirt two half together and make it your own touch like robbe repairs
I’m excited for this bro gonna be a sick look when it’s done 😎👌🏻 also the black and red vibes are actually nasty I think you should leave like that 🤙🏻
rivets are like imperfections to this whole widebody thing
the widebody kit looks very good, to make the front and rear look better, there is a brand called ARK Performance they make very nice diffusers but its a bit to the expensive side though
He knows what ark is
Man, seeing so many cars with amazing wife idy kit options makes me jealous since the P2 S60 doesn't really have much even for body kits in general, aside from a few front lip kits and ground effect kits.
Thank you for the links to all of the supplies needed in the description but I couldn’t find the link for the wide body kit, can that be posted also please and thank you. 👍
Super excited to see her all one colour
Right on bro n it prolly one the gnarliest looking Hyundai out lol.... Peace n love bro keep it rad stay safe and build on l8z fam
This build will be so good
Rear canards and rear diffuser for sure
You should definitely show the old owner once it's painted
That gap can be filled like all Wide body work it's supposed to be one with the car so filled to the body and that way you can't tell where the body kit starts and the car ends
You can get some aquatic foam for fish tanks to fill that gap in the rear for the sideskirt. Just shove it into the gap. Don't need to shave it or anything beforehand
I have the krotov kit on my 2015 mustang and I love it!
Awesome video!
I have a genesis coupe man that kit looks good
Maybe you could try connecting the two side skirt parts with body filler?
hey robbie, I've loved watching these video's of you rebuilding the genesis coup because I've always wanted to do something like this especially with this exact car and I was hoping to know around how much you've spent so far on the car
a tips for the back of the car is to get like a defuser or something
where do you find all these cool wide body kits ? I want one for my 2010 honda accord exl!
I would do a jenny style bumper cut and a nice diffuser and splitter
Add spacers for the wheels
Hey Robbie what size drill bit did you use to drill in the holes for the spoiler
So after you installed this kit to confirm the fit you took it all back off right and did the wrap on the car and wrapped each individual piece of the kit right??
I’m pretty sure I seen this in sauble beach when I was there
Widen the axis or get bigger/wider tires.
is this the genisis stuck it wyevale ontario?
I met Robbie recently and he will forever be my favourite content creator he is so respectable for everything he does with his cars, content, and fans. Forever love❤
So excited for this
Where should I bay all body kit.
Never seen this done before, do you body work over all the bolts and edges before paint?
Needs a Robbie Defuser 👍
Where did buy your wide body kit ? Looks great
I used to live nearby where you bought that genesis
Rear mounted turbos in the back😮❤
What millimeter was the mounting hardware
3:18 "13 😡" 😂
Feather the edges to the stock panels of that kit so it looks seamless please.
hello i am in the same position as you thinking about saving a 2011 if the price is fair im also Canadian just wondering do you order eveything on line i want to do the same thing would appreciate any pointers you can give and i will keep watching you videos for sure thank you
Should put the other jennys bumpers on it shit would go soo hard with the widebody that next to the brz 🔥
Hello friend, greetings from Chile. Could you share the page with me to buy the widening body kit? please
this is pretty cool, and im probably not the only one curious, what did you decide to do with that old jeep? it would make for a great WIP i think.
Where can I buy that wide body?
720p is a bit odd but great video!!
@BobbyFerreirabuilds. Scammer no scamming we know that you're not the real Robbie your account was created yesterday you petty thief
Who else’s likes his vids right b4 the vid starts?
M&s front lip and carbon defuser
Random question lol how’s your garage floor holding up ? Do the jack stands leave imprints on the floor after having a car sitting on them ?
Was wondering the same thing
Once you have the car finished, you should drive it and show it to the guy you bought it from, see if he’s down to be in the video
Build the rear bump like you did with the other genesis
Ik it's a bit late but a m&s rear bumper would be beautiful
Ready for what’s in store🫡
Please tell me you painted the exposed metal after drilling and before you used the rivnuts??
@BobbyFerreirabuilds. Reported for scam. Get a life
nah
Best part of the video is how you know that 3.5” is the width of your hand🤣 I see what you did there!
Take off the backbumper and put some nice exhaust tips
From the rear the bottom will look fine with thicc tires
If the gap in the side skirt isn't an issue structurally with the car, I honestly don't think it looks that bad, I actually kinda like it.
add canards in the front and back
An M&S rear bumper with a rear diffuser will 100% help fix up that rear
Ive always thought itd look 10 times cleaner if someone filled all the grooves and the joints etc and sanded the body kit in so it turns it into a factory looking wide body kit. Never seen it done but it would be sweet
@BobbyFerreirabuilds. I would if I wasn't in the UK. I believe in you though :)
I like it work, but is my opinion that if you’re making holes into a car, please use some rust protection thank you
Alright hear me out red and black is a perfect color combination for this car
Need to put the fat tires on to widen the bottom out.
Canards on rear bumper
The big Robbie
I think its look better when back bumper is removed
or cut a little bit
Imo, all those bolts take away from the beauty
Roof wing plz
Boot/trunk exit 3d print your own bumper
Make a splitter!!!
Ghost Gang banner!
Why is this video 720p
Hey bro, just randomly coming here to say you need to put bigger wheels and tyres on it 😉😂😂
Change the rims