I'm a Brazilian hobbyist and I've been following your videos. I thought this idea for making straight cuts was interesting. Very simple and easy to build in my own workshop. Thank you for sharing important information like this.
Think I will make one of these for my 18V jigsaw but using a piece from a 8mm thick flooring-laminate plank as it is thinner and more wear-resistant(if I have enough room between the blade-holder and the plate I might glue on a piece of steel plate with a slot in it for even more strength and wear resistance)..
I always have a problem with the jigsaw wandering and cannot get a 90 degree cut. After watching this video, I am sure it will solved the problem. Thank you for the upload. ARIGATO.
Dear Sir, at 5:08, you used a vertical jig for a hand saw? That's interesting. How did you make that? What is the black material do you use to cover the jig so it doesn't get damaged by the saw? Thank you.
Thank you for your comment! Magnets are attached to pieces of wood that are assembled at right angles. Apply sandpaper to the wood side to prevent slipping.
Yorumun için teşekkür ederim! Bosch ürünlerinin geliştirilmiş parçaları var gibi görünüyor. Yavaş yavaş gelişeceğini düşünüyorum. Daha sonra tereddüt etmenin daha iyi olduğu durumlar olabilir.
真摯な姿勢、素敵です！
コメント有難うございます！
たまに調子に乗ってしまうので注意ですね。苦笑
もっさん大人の対応素敵です
ジグソーって実際にやっつてみると思ったより暴れますよね(笑)
またアイデア動画お待ちしています！
コメント有難うございます！
つい、調子に乗ってしまいました。
真摯な姿勢は大事ですね。
フランスからこんにちは、あなたは素晴らしい仕事をしています、よくやった👍👍
Merci pour votre commentaire!
Je suis heureux!
この素晴らしいビデオを共有していただきありがとうございます。
私はテクノロジー業界で働いていますが、今は大工仕事に就き、新しい人生と意味を見つけたように感じています。
平和
ヒュー・ヒル
コメント有難うございます！
お役に立てて嬉しいです。
大工素晴らしいです。頑張ってください！
日本より応援しています。
素晴らしいですね さっそく作りました75ミリの角材も直角に切れました ありがとうございました。
コメント有難うございます！
お役に立てて嬉しいです！
治具に沿うように切れるからZigSawなんてダジャレを信じる人が出てきそうなくらい便利な治具ですね😆
コメント有難うございます！
これで更に手軽に使えるかなと思います！
I'm a Brazilian hobbyist and I've been following your videos. I thought this idea for making straight cuts was interesting. Very simple and easy to build in my own workshop. Thank you for sharing important information like this.
Thank you for your comment!
Let's enjoy life as people with the same hobby!
I'm happy to be of help!
良い考えですね。
コメント有難うございます！
真摯な気持ちを忘れずに頑張ります！
Think I will make one of these for my 18V jigsaw but using a piece from a 8mm thick flooring-laminate plank as it is thinner and more wear-resistant(if I have enough room between the blade-holder and the plate I might glue on a piece of steel plate with a slot in it for even more strength and wear resistance)..
Thank you for your comment!
Abrasion resistance is also important.
I think it's a nice idea!
I always have a problem with the jigsaw wandering and cannot get a 90 degree cut. After watching this video, I am sure it will solved the problem. Thank you for the upload. ARIGATO.
Thank you for your comment.
I would be happy if I could help you!
Muy bien, magnífico. Muchas gracias. FELICIDADES. Has dado en el centro de la Diana 🇪🇦
¡Gracias por tu comentario!
¡Estoy feliz!
Thanks, good and simple solution.!! 👍👌
Thank you for your comment!
Simple & low cost is important!
Dear Sir, at 5:08, you used a vertical jig for a hand saw? That's interesting. How did you make that? What is the black material do you use to cover the jig so it doesn't get damaged by the saw? Thank you.
Thank you for your comment!
Magnets are attached to pieces of wood that are assembled at right angles.
Apply sandpaper to the wood side to prevent slipping.
@@DIYmotto noted. Thank you, Sensei... 🙇🏻♂️
Наверное, самый простой и дешёвый способ заставить лобзик пилить под прямым углом. Супер !
Спасибо за ваш комментарий!
Важное значение имеет простота и низкая стоимость.
円形や楕円形のパネルをよく作るのですが、いつも断面が直角にならなくて、以前紹介されてたジグを作れるかなぁ？と思ってました。今回のだと、マネするのもハードルがいくらか低そうで、作れそうです。試してみたいと思います、ありがとうございます( ^ω^ )
コメント有難うございます！
工程が多い感じはありますが、シンプルで簡単です！
Excelente ideia, vou replicar.
Obrigado pelo seu comentário!
Por favor ajude!
Didn't understand anything you said but got the idea, good idea, hi from hull UK, my stupid fault i forgot to turn on auto translate
Thank you for your comment!
I will set up translation soon.
The first talk is a declaration of respect for those who come up with DIY ideas!
ARIGATO GOZAIMASU, Thanks 😊
😊❤🎉😊🎉
Thank you for your comment!
Thanks!
Thank you for your comment!
I'm happy!
とても良いですね。
質問があります。
治具の前は広げてしまった方が良いのでしょうか。切断する板の墨線とジグソーの位置を合わせる時にし先端はスリットのままでもよいような気がしました。
別のお願いです。海外のTH-camで、マルチツールのブレードを上下からサンドイッチのように挟み込み、ブレードが暴れないようにして墨線通りに直線切りする治具を見ました。国内に市販品はないようですす。考案して頂ければ幸いです。
コメント有難うございます！
切屑が溜まるので、広げた方が視認性は上がるかなと思いました。
でも絶対ではないですね。
マルチツールを持っていないですが検討してみます！
Bütün dünyanın derdi aynı ise neden bu aletlerin tasarımını değiştirmiyorlar?
Yorumun için teşekkür ederim!
Bosch ürünlerinin geliştirilmiş parçaları var gibi görünüyor.
Yavaş yavaş gelişeceğini düşünüyorum.
Daha sonra tereddüt etmenin daha iyi olduğu durumlar olabilir.
❤❤❤🇧🇷🇧🇷🇧🇷🎉🎉🎉🎉
Thank you for your comment!