I have one of these, it's about 20 years old, brilliant little machine. It's been back to Mantis once in that time for a full service. Had it out with the scarifier attachment on it today.
What do the three tubes do that go in the fuel tank? One's a breather right? Should that not be submerged in the pertrol? How do you know that the tubes were the correct length before?
I am currently waiting foir the replacement carb I ordered to arrive to get my Mantis operational again. It is a pretty good little workhouse when it runs right.
Hi was just wondering if you were having the same issue as me with fuel leaking out of the side of the carb and running down onto the ground after sitting.
You have the tines set for WEEDING. meaning they are scratching the surface. If you swap them out so the tines face towards the ground they will dig down into the soil
I have one of these, it's about 20 years old, brilliant little machine. It's been back to Mantis once in that time for a full service. Had it out with the scarifier attachment on it today.
Love seeing the old stuff brought back to life! Good job 👍,my best to family D2S!
What do the three tubes do that go in the fuel tank? One's a breather right? Should that not be submerged in the pertrol?
How do you know that the tubes were the correct length before?
Hey, if you didn’t put on a new carb, what was the result of your cleaning efforts on the old carb?
Thanks for sharing the knowledge, keep it coming.... 👍
I have one of these
When I put it to work, the tines stop turning
Any ideas please
I am currently waiting foir the replacement carb I ordered to arrive to get my Mantis operational again. It is a pretty good little workhouse when it runs right.
Hi was just wondering if you were having the same issue as me with fuel leaking out of the side of the carb and running down onto the ground after sitting.
No. But I put a new carb on this one.
@@design2survive I put the exact same carb on and it still does it. Runs out the side down the filter and I have a little pool of fuel that's ran out.
my is blowing oil out thru carb?
How to replace ignition coil module for the Mantis Tiller? I replaced carb and I'm not seeing spark. Can you provide a video?
What did you soak everything in?
I would just use carb cleaner
where can I bring my Mantis to get it repaired? I'm in the Orlando area.
Mantis web site usually has a list of dealers there is a service icon mantis.com/find-a-retailer/
Mine runs great and after it warm up it locks up..? i don't know why..
Check the oil or grease on the tines square plate maybe 🤔 need to add some try it
You did a 👍good job I got a old one myself and run 👍 good video
Looks like the blades are on backwards….not sure
sick vid! same here. I'm going to take apart now..
Nice job!👍
Great video! Thank you!
It needs a Coil and I can't find something like it to do
You have the tines set for WEEDING. meaning they are scratching the surface. If you swap them out so the tines face towards the ground they will dig down into the soil
Great tip. I’ll be using it soon for a garden..thanks!
The gas tanks end up leaking on mantis Tillers not good
I can't find an example of what to do🥺🥺🥺
It was a carb. The coil was fine
@@design2survive
Can you help me please
Yes it was fine but yesterday it was not giving electricity
Doing the same exact thing lol
They are great for in between rows. I would never use one in rocky soil. They are tough on your wrist s
Origanal parts are avalable from Mantis direct
Hello I have one GT5312 Coil
Thank you
Just buy a tune-up kit for it. $16.95 which comes with a new carburetor, new fuel lines with plug, new spark plug and gaskets.
You better grease that gear box before the gear goes dry ,that gear is more expensive of buying a new transmission.
comes with new air filter 2 xtra bulbs and spark plug!
cheaper on E BAY!