My n52 is doing this when cold and usually starts normally after 15mins if i have started it before. Do u think i might have same issue? No engine lights or anything
@@L0CALDRUGMAN if your not getting any fault codes then you'll have to use live data to pin point the problem. That won't be easy if you're locking the knowledge of what the sensors should be reading.
Hi to you i have the wrong code on my bmw e39 model 2000 523i 41 camshaft signal intake side and has no engine light on what is wrong. the sensor or the cam chain
Top tier diagnostic teach
My n52 is doing this when cold and usually starts normally after 15mins if i have started it before. Do u think i might have same issue? No engine lights or anything
Get it scanned with a tool that can give dealer level codes
@@RayonsAutoDiagnosticsonly codes i get are, lambda bank 1 sensor 1 , exhaust flap error, oil level sensor error
@@L0CALDRUGMAN if your not getting any fault codes then you'll have to use live data to pin point the problem. That won't be easy if you're locking the knowledge of what the sensors should be reading.
Hi to you
i have the wrong code on my bmw e39 model 2000 523i
41 camshaft signal intake side and has no engine light on what is wrong. the sensor or the cam chain
Sorry for the late reply, first will need to check the wiring.
The plug you are probing looks like the vanos actuator. Is that what you replaced? Or is there also an intake/exhaust cam sensor in that location
@@leveluplife8585 yes, there is an intake and exhaust cam sensor in that location. The cam sensor was replace
Good video I’m not getting no power to my cam sensor the one on the intake side