Hoping to build a vk63 next month. I will no doubt watch your video again just so I know the correct order of things. Thanks for the great and informative video 👍
It is surprising how good the quality is for an Aliexpress case. I am looking to see if I can find some inexpensive mechanical movements. I would love to make a few of these even better quality.
I have a similar case/movment.. the chono needle came off. Ive already removed the Crown and plastic ring.. but the dial is fixed to the other side of the movement. how do i pull the vk63a mvmt/dial out of the Case with the Pushers in place.. I tried turning the pushers to see of they are screwed on but nothing seems to be working? Or is there a way of Popping out the crystal from the outside? Any info will be greatly appreciated.
Try removing the dial and movement at a steep angle from the opposite side of the case as the pushers. When putting it back, the pusher side goes in first. I hope this helps!
@@dadmodswatches are you or have you made a more in detail video using vk63 movement? Ive built a couple of nh35 and want to try this now. Seems a little more complicated. Also thanks for the reply.
@@Sports_cards_steels I haven't, but I should make a more detailed video on the topic. If you can work with NH35s then it will not be much more difficult for you.
Been looking at these, are the 63/64 only automatic? Couldn't find any mechanical movements much the pity. Great video, thanks for getting me into these mods!
Please like comment & Subscribe!
Hoping to build a vk63 next month. I will no doubt watch your video again just so I know the correct order of things.
Thanks for the great and informative video 👍
looking good :) made one of these recently too (sterile dial with my logo and a blue instead of red) theyre a lot of fun to do
It was really good fun to build a couple of these. I'm sure I'll do more
It looks fantastic and very much like my Rolex in my case. I wonder if they make a mechanical movement version also.
It is surprising how good the quality is for an Aliexpress case. I am looking to see if I can find some inexpensive mechanical movements. I would love to make a few of these even better quality.
I did a Daytona rose gold yesterday and the small pointers like the second and the 24h pointers were driving me insane. But it ended up going well
The sub-dials can be tricky!
i cant get my crown out. ive saw the 18:08 part but i dont know what to do still
Sometimes they can be sticky. Be gentle but firm
So you can put the face right over the date wheel? I’m building a watch and need to know if I can do this or have to remove it and you skipped it
Sorry about that! Yes you can put it over top with no problem
do you have a build list with links?
No I don't
@@dadmodswatches I’m trying to find a “R” logo panda face
@@colindonahue4205 You might try julontime.com/
Is the Relax crown logo supposed to be broken? Some sort of tongue in cheek thing?
You got it!
I have a similar case/movment.. the chono needle came off. Ive already removed the Crown and plastic ring.. but the dial is fixed to the other side of the movement. how do i pull the vk63a mvmt/dial out of the Case with the Pushers in place.. I tried turning the pushers to see of they are screwed on but nothing seems to be working?
Or is there a way of Popping out the crystal from the outside?
Any info will be greatly appreciated.
Try removing the dial and movement at a steep angle from the opposite side of the case as the pushers. When putting it back, the pusher side goes in first.
I hope this helps!
Does all of it come together as one kit, or do you need to buy components separately? What comes with what?
This was all sold separately
@@dadmodswatches case, bracelet, movement, hands, dial all separate?
@@hellosheila Not all separate. Dial, hands, and movement were separate. The case and bracelet came together
@@dadmodswatches easy enough.. now I just need to brush up on skills I haven't used for 25 years!
Do they have the cut out dial for the date wheel
I'm sure they do
Where did you get the dial from please?
It was a store on Ali but it is no longer there
Where can I find this dial?
It was an Ali store but they are gone now
AliExpress.
Did your case come with a white ring inside? If so did you use it?!
Yes and yes. It keeps the movement secure in the case
@@dadmodswatches nice! How did yours go in? Before or after movement?
@@6661Spicer6661 If I remember right, after
Do the small complications actually work? And how would I set it up
Yes they do! Its all in the video😉
@@dadmodswatches are you or have you made a more in detail video using vk63 movement? Ive built a couple of nh35 and want to try this now. Seems a little more complicated. Also thanks for the reply.
@@Sports_cards_steels I haven't, but I should make a more detailed video on the topic. If you can work with NH35s then it will not be much more difficult for you.
@@dadmodswatchesok thanks again for the reply. Ill be trying to build a panda daytona.
How do you get ahold of one these relax dials
They were on Ali but the store is gone
Been looking at these, are the 63/64 only automatic? Couldn't find any mechanical movements much the pity. Great video, thanks for getting me into these mods!
These are what is called a mecha quartz movement. If you want an automatic you would be looking at the NE88
Its not a mod ,its a build, also use some thread lock on the crown stem , apart from that looks good
Thank you!
All you had to do buddy, is turn your movement holder upside down and it would have fitted. I do like watching your stuff. I am not criticizing.
I swear I tried that! No worries! Constructive criticism is always welcome! Thanks for watching