I have a customer with a failed internal tcm ground. Checked harness ground is good. Attached wire from harness to case. Has communication now. Initial complaint was a 3000 rpm idle. Tested by putting a jumper wire to the tcm case to body ground, and faults disappeared😊
my SS isn't getting power to the starter wire and I'm thinking part of it could be one of the grounds? I've cleaned and assembled them all. No starter click or starter relay slick, swapped and tested all fuses and relays and I'm at a lost. I fixed the TCM issue but still no crank etc
I would recommend after cleaning them spray them with silicone or battery and terminal protectant to keep them from corroding again that’s what I did with mine
I have been dealing with this myself. Back in January I changed the Vss and that fixed it then. However it is back now again I have cleaned all the grounds,checked fuses etc. The tcm does not look fried so I am kinda stuck
I have had this same issue, What we found . Was their was a short in the o2 sensor . So look for a short if you continue to have this issue 07 cobalt lt
@@dancoles1036Have you tried looking at the grounds that connect to the front of the trans? They get completely corroded and start throwing codes. I have an 09 Cobalt and this fixed my issue.
Having this same issue with my 2014 Chevy Malibu. Same code U0101. Dealerships says I need a new transmission but I call BS because the TCM connection keeps going in an out.
Thank you god bless you I fixed it with your help
Thanks man. This fix mi wife’s car.
Really? What kind of car? Did her n codes come off immediately? Or did she have to drive it a bit?
I have a customer with a failed internal tcm ground.
Checked harness ground is good.
Attached wire from harness to case.
Has communication now.
Initial complaint was a 3000 rpm idle.
Tested by putting a jumper wire to the tcm case to body ground, and faults disappeared😊
Man I wish I could understand this lol. How do you know which wire to disconnect from the harness? And what case?
my SS isn't getting power to the starter wire and I'm thinking part of it could be one of the grounds? I've cleaned and assembled them all. No starter click or starter relay slick, swapped and tested all fuses and relays and I'm at a lost. I fixed the TCM issue but still no crank etc
I would recommend after cleaning them spray them with silicone or battery and terminal protectant to keep them from corroding again that’s what I did with mine
I'm going through same thing on 2014 Chevy Cruze ugh 😩 I can't wait to try this tomorrow
I have same problem with my chevy cruze 2014, have you ended up fixing it?
Did you try it? How did it turn out for you?
I have been dealing with this myself. Back in January I changed the Vss and that fixed it then. However it is back now again I have cleaned all the grounds,checked fuses etc. The tcm does not look fried so I am kinda stuck
Your best bet my friend is to order a new TCM computer. It's real easy to install by yourself.
...curious, good effort tracing out ground connections, not an easy job.
I have had this same issue, What we found . Was their was a short in the o2 sensor . So look for a short if you continue to have this issue 07 cobalt lt
Does replacing the tcm a useful solution? Mines doesn’t look bad but I’ve tried grounding the wires and still nothing
My wires to the tcm connector are fucked up and causing errors with mine I replaced the tcm and it fucked up again within 4 months
I tried replacing TCM. Tried grounding hack. Same issue. Probably bad wires.
@@dancoles1036Have you tried looking at the grounds that connect to the front of the trans? They get completely corroded and start throwing codes. I have an 09 Cobalt and this fixed my issue.
Why dident you record you doing it? So you could actually show the grounds
You also have one over valve cover right side
Having this same issue with my 2014 Chevy Malibu. Same code U0101. Dealerships says I need a new transmission but I call BS because the TCM connection keeps going in an out.