I have just acquired two similar drill boxes that came with two Fobco bench drills that I won at an auction here in England. Having already viewed your restoration of the boxes I have started restoring the ones I have though as I don't have facilities for sand blasting or powder coating I will just use paint stripper and spray paint. The size legends will also stay original so in all a partial restoration on my part. The bench drills are also being improved.
Awesome job man ! I'm so happy you did the white lettering. Maybe try powder coating the raised letters white first, letting that cure. doing the whole piece in red. Then wiping off the red on the raised letters with a damp sponge, Before letting the red cure? Either way my favorite thing about channels like yours are watching things grow and get better and better over time. And you're definitely doing that !
Great job! But you’re right about the letter painting....should have just left it as is. I’ve seen guys spray paint on a block of wood or rubber and then lightly press the letters against it to pick up the wet paint. Might be worth a try.
OK, that's cool. I'll just have to continue using the Snap-On drill set that I picked up at a yard sale for $5 a few years back as is. I'm not sure how old the set is, except to say that Snap-On was sourcing Osbourn out of Sheffield England for their drills when my set was made. If you're bored and want to restore another case, I can loan you one :)
You have good results with drill dr? We tried one at my old machine shop and had better results with a drill gauge and a belt sander, especially when we needed split points.
I used the oxalic acid in the links in the description but there are tons of better rust removers people keep telling me about but I had this handy so thats what i used.
@@EasternNCSportbikes its something i conspired buying for a long time, but I always wondered if its a good deal. There is alot of toxicity online about the drill doctor vs hand sharpening. tempting if I can restore a few pounds of drill bits to good condition.
I wouldn’t mind if you would actually talk in the videos. Almost like a brief explanation, (OK now that we applied the paint stripper and got off almost everything we’re heading to the sanding box.). Great videos though no matter what
Great job on the restoration but I'm honestly more impressed that the set was still complete 😂
Yeah some of the bits seem to be replaced along the way a few were different, Im not sure the exact age of the box either.
@paquitos hammer 5аф
So good. Those will last another life-time. Just think about how many old sets of tools got tossed out. Thanks for bringing these back to life
I have just acquired two similar drill boxes that came with two Fobco bench drills that I won at an auction here in England. Having already viewed your restoration of the boxes I have started restoring the ones I have though as I don't have facilities for sand blasting or powder coating I will just use paint stripper and spray paint. The size legends will also stay original so in all a partial restoration on my part. The bench drills are also being improved.
I'm amazed that all the bits are there still
Awesome job man ! I'm so happy you did the white lettering. Maybe try powder coating the raised letters white first, letting that cure. doing the whole piece in red. Then wiping off the red on the raised letters with a damp sponge, Before letting the red cure? Either way my favorite thing about channels like yours are watching things grow and get better and better over time. And you're definitely doing that !
Hey man thanks alot I really enjoy the encouragement it means alot.
I think it’s really cool a sub sent you this to restore. Please do more videos like this. Great content
Did you print out the size labels yourself?
Okay seriously though, how do you have such quality videos with only being on TH-cam a few months 😂 you've got a new sub
Great job! But you’re right about the letter painting....should have just left it as is. I’ve seen guys spray paint on a block of wood or rubber and then lightly press the letters against it to pick up the wet paint. Might be worth a try.
OK, that's cool. I'll just have to continue using the Snap-On drill set that I picked up at a yard sale for $5 a few years back as is. I'm not sure how old the set is, except to say that Snap-On was sourcing Osbourn out of Sheffield England for their drills when my set was made.
If you're bored and want to restore another case, I can loan you one :)
Wow, you incorporated all of my suggestions from your last Snap-on video! 🤣 Once again, excellent work!
Keep making these, I’ll keep watching.
Fantastic restoration, enjoyed the video enormously.
Man anytime someone does one of these snap on ones they should make the lettering white looks real good
These videos are so relaxing to watch lmao
My dad gave me this same set
Except its missing the wite that lifts the rows of bits up with the lid
I need to do this to it one of these days
Looks so good. Great restoration! 👍
how do you only have 11k subs?! great videos. keep it up!!
Very nice. Like new and sharp again.
Beautiful job now that’s a dope ass set of drill bits! 👍🏼👍🏼
I have the identical set, I bought it early 90s, missing a couple of bits though. Nice job!
Where did you get, or how did you print the size decals?
I took the cases to a local sign and sticker store and they made them for me!
This reminds me of the channel rescue and restore
Master Restorer! But how did you find a such a complete set like this? I need friends like you.
They’ll resell that to you for a low payment of $50 a month😂
Angel Martinez exactly. Snap on is way expensive
You are a great rejewvenist.love your work you have a very gifted talent.keep the videos conning
I have the same storage tin, with one slight difference; it's a Craftsman :)
You have good results with drill dr? We tried one at my old machine shop and had better results with a drill gauge and a belt sander, especially when we needed split points.
After I got the hang of it I loved it, sharpened every dull bit I owned.
I could be wrong but it doesnt seem like it hits the inside of the cutting edge.
@@johnnyregs2378 no, its angled so it can follow the bits bevel when you turn it
@@rustyshackleford3281 that doesnt make sense and it's not what I was talking about.
@@johnnyregs2378 i kmow what you meant but explained what it does. If you cant comprehend that then stay away from my drill bits hahahaha
Would you happen to sell any of these tools you restore? And also is there a way to send you tools that would be cool to be restored?
so when you use that blower to get the old paint and grime off does it put a coat of silver or something along the lines of that on it?
It just strips it down to bare metals. It's called a sand blast cabinet. Different medias leave different finishes.
@@EasternNCSportbikes o ok it's pretty cool.
Surprised set was complete. Still nice job
what model is the hermetic machine that you use for the sand blasting.
What do you use to remove the rust from drill bits and screwdriver bits
I used the oxalic acid in the links in the description but there are tons of better rust removers people keep telling me about but I had this handy so thats what i used.
Now...will you use them?
Instead of using the pen in the end, use toothpicks out of wood and do it this way. Sry for my bad english lol
I like the A.R.
Very kewl restoration.
Damn that looks amazing
how many drill bits can you get out of a stock drill doctor?
I honestly dont know but I did all these bits and more off cam it doesn't look like I hurt it at all.
@@EasternNCSportbikes its something i conspired buying for a long time, but I always wondered if its a good deal. There is alot of toxicity online about the drill doctor vs hand sharpening. tempting if I can restore a few pounds of drill bits to good condition.
impressive, but what I miss you is: the sticker of the measures
But he did replace the stickers... Did you even watch the video?
I feel bad for the original owner they're still paying 24.99 monthly on this set but I do like that the case is all metal and theres no plastic in it
Hi bro 👋👋👋 very good restoration snap-on drill bit case👍👍👍
Thank you very much for your support
Ottimo lavoro complimenti
Looking forward to more videos hopefully.
Nice restoration...👍
Sweet! Keep em coming!!!
Does Milwaukee shockwave drill bits eat anything you put in front of them
Milwaukee bits the best bits ive ever used. I never knew drilling could be so easy until I got a milwaukee impact driver and milwaukee bits.
Love the videos. Keep it up!
Awesome job
locks good but my school did thorw out like 10 off tham boxes a week ago XD
Bro, I would’ve taken all of them and restored them 😂
Mantap bro,good job 👍👍👍.
I feel like you go to a lot of flea markets lol 😂
Awesome Job.
Great job ,new subscriber 👍
Use a Milwaukee to help the restoration of snap on that’s too funny.
usally my drill set has few of the missing, and misplaces with nails...
Looks mint
Stickers were a copp out.
I would have got a stencil/decal made, put that on then sprayed it black and peeled it off.
Hey plz do make a video showing how you would do it. Im not that good! thanks for watching.
@@EasternNCSportbikes send it over and I'll be glad to fix it for you lol. Not kidding.
I have the same ones in like new condition
I wouldn’t mind if you would actually talk in the videos. Almost like a brief explanation, (OK now that we applied the paint stripper and got off almost everything we’re heading to the sanding box.). Great videos though no matter what
No me gustó que pintaras el logotipo de Snap-on, por lo demás me parece un video genial.👍👍
Great job man
another video required , pleeeease !
Good job
How old do you think this set is?
if I had to guess id say just from the 80's? I could be completely wrong though. Thanks for viewing!
I honestly don’t recall the Snap on lettering being white on that but set....
people yelled at me for not making the letters white on the last resto I did. I cant win lol
Who in the living hell has come across a complete index? Just asking.
Great job. I thought u would have shined up the bits a little more.
Epic job, you are a perfectionist;-))
At first I thought they were pretzels on the foryou TH-cam page
Viejo, cuantos canales tienes? Jajaj
Brilliant 👏
Who treats their snap ons like that!
Ghetto Wagon tools are not meant to look pretty.
@@harryabbott9994 Ya they are. i clean up my tools and keep them nice. I oil my sockets, my wrenches, Bits, my pullers All looks new and they are old!
Great job! I have the same set... In about the same condition.for now!! T-Wrecks
Wow it looks expensive . .
Wow Nice job
I have a snap on bench if you want to try and restore for me😊
Nice 👍🏻
Great job! Subbed!
Excelente 🎉
Awesome job but snap on drill bits are pretty garbage
epic video
Gotta keep those hands pretty or ugly
Using a twist drill with an impact driver? Pardon my French but what the fuck?
Shouldve used a RIDGID drill 😂😂
but its quite impressive
some one is still making payments on this!
Men you have 3 or 4 channels
Молодец.
А как заклёпки закрасил не показал 😉
Извините, я не хотел делать видео длиннее. Спасибо за просмотр.
@@EasternNCSportbikes всё нормально 😉👍
Lol, ok doc
use a different colour! 😭
milwakee drill tho lmao
Ok you get some cheap rattle can red. Throw bits in clr overnight. Spray paint red. Cheap rivit gun. 2 min video. Now 10 mins. Wtf really