I’ve been watching your videos and I find that the way you design is unique. Every time you draw you demonstrated clearly and draw with ease. You are the best teacher ever 👏🏻👏🏻👏🏻
that was very useful, thank you! I've gor a question though. Is there a way to scale the objects while doing a rectangle array? like having smaller objects on the bottom of the ring.
very nice triks leaving small space on base surface to create small planar hole instead of nasty singularity! Also explode-rejoin to fix naked edge, clever!
@@PJChenJewelryDesign You are most welcome, I've been using Rhino occasionally since the first beta. Over the years at my prior place of employment, we used it for many jobs. I could always get by but never really knew the advanced functions. Since my kid left for college I've had a lot of time on my hands so I took a few courses on udemy and have finally really been getting into the meat of Rhino. I recently discovered your tutorials and they have been a great supplement to burning these advanced techniques into my brain. Thanks so much for making them available to us.
PJ, great video. i have some challenges trying to copy your explode move at 13:46. After exploding and joining the surfaces, there is still an edge in the middle along the Z axis. Can you suggest what should I do?
@@PJChenJewelryDesign Thank you for the response. I have another question. At 6:15 in the video, you adjusted(enlarged) the UV curve and used that as the boundary to place all the small units. The total length of all the small units will be longer than the original UV curve(created from the volume) in Y direction. Will that create an overlapping condition at the seam?
i did something like this but it's a pendant. I think plot the dot on the surface and using plug in to draw curve on surface will allow to control much more.
Wow!!!!😇😇Is it normal that it's about 6 months what I started modeling but I can't modeling everything, only simple and sometimes middle difficulty jewelry?
I loved the simplicity of this tutorial. I did it many times but it is always giving me the same mistake. Where the seam is always remain open, others capped easily. I changed the base surface to a slightly larger, exploded it and joined. What the problem can be? I am advanced on rhino :)
Please help PJ, everytime after flowing the surface my holes at the top and bottom won’t form planar surface , says the curves are not planar and I can’t get it
hi PJ by chance I have an order from a customer this afternoon for a signet ring witn a cabochon stone , it's what I need thanks again, when can you make a video for filigree ?
you can check this link for all the new feature in rhino 7. www.rhino3d.com/7/new/ For me, the SubD is big in Rhino 7. it allow you to work on organic 3D modeling more precisely.
Why did you decide to use sweep 2 instead of curve network to make the ring? It seems much easier, but on a previous video you made a signet ring using the curve network tool.
Hi aanaga sin, make sure surfaces on both side of edge are perfectly align before you flow. If it doesn't work. you can email your model to my email at pj@pjchendesign.com I will take a look for you.
@@PJChenJewelryDesign I did it again but It has been an closed polysurfeace now, well done. I made mistake as you said my surface on the side of edges not perfectly before. Thank you so much for the trick and tips Guru PJ Chen. Good Job.
I tried to do but to me some things have wrongs Like, the texture, when I did the command rebuild and I pull the point to up, the side of the square follow the central point. But rest went well. could you help me in it?
It really depends on how detail of the texture, what other program you are running while you are using Rhino. my laptop has 16GB RAM, and it has been working fine for both Rhino, adobe and keyshot running at the same time.
I use keyshot for my rendering. but if you just want to look like metal like what I have in thumbnail. That was done in Rhino 6. you can assign materials for a quick render view. I will make a show video for it.
Thanks PJ! You are the best Rhino teacher!
Thank you and welcome to my channel.
PJ, you are my guru! Thank you so much! I will study this video repeatedly until I can do it in my sleep!
Haha. That is great. I am glad you like this video.
I’ve been watching your videos and I find that the way you design is unique. Every time you draw you demonstrated clearly and draw with ease. You are the best teacher ever 👏🏻👏🏻👏🏻
Thank you 😀 I am happy to know you like my videos. please tell all your friends about my channel.
Definitely, please make more video related to ring or necklace designing👏👏👏
Dear PJ! Your hacks for fixing naked edges are awesome! Thank you a lot for sharing)
Super!! you are welcome!
I love this technique, and there are quite a few nice touches you included with this particular tutorial (such as fading the pattern). Brilliant work!
Glad you like it!
One of the best video ever! Uv curve, flow along surface, cage edit and some very useful tricks...well, thank you Pj Chen!
Glad you liked it!
Thank you PJ. This is another awesome tutorial as always. :)
You are very welcome!
So many good tips among the way. Worth watching again.
Glad you think so!
Dear PJ Chen
Thanks always
have a great day~
Have a nice day
Great, I searched a video like that... but I never found, but now I found. nobody explain this command like you! Thank you so much, Chen!!
You are very welcome!
Thank you! Everytime i learn more skills with your videos, thank's a lot!
That is super!
Pj chen u r best you explain all the things very smooth and easy method
Thank you so much
Thanks so much. It's so helpful to be shown what issues to expect and how to resolve them.
You are very welcome
PJ you save my life you are amazing
that is super!!
Thanks PJ. Your all video is best 🙏🏼🙏🏼🙏🏼🙏🏼
You are very welcome.
Perfect 😍 thank you 👌🏼🌹
You're welcome 😊
Love it! learned a lot of tricks ... thanks a lot PJ Chen .
You are welcome!
Awesome Instruction!
Glad you like it!
Fantastic tutorial as always, but today is something special!
Cool. Nice to hear that. feel free to ask questions!
Great tutorial. Thank you!!
You're very welcome!
Great! Nice tips, thank you!
My pleasure!
Ahh love your videos PJ! Thank you... very useful, to wrap any kind of pattern cleanly around an arbitrary object...
Glad you like them!
Thank you so much PJ for sharing this useful tutorial. Always be blessed.
Super! You are welcome!
This is a hard one. Thanks for the PRO TIPS!
it took me a while to figure out the easy way to show you
I learn something valuable with every video. Thank you!
You are very welcome!
Good as always!!
Thanks
Excellent tutorial. Thank you.
You are welcome!
Fantastic Pj👍🏻another awesome video, thank you
You are welcome!
that was very useful, thank you!
I've gor a question though. Is there a way to scale the objects while doing a rectangle array? like having smaller objects on the bottom of the ring.
you can have the history on before you do array
PJ教學影片對學習RHINO的我很有幫助
太好了。有問題可以在這邊提出來唷！
Love the trick in this video. Thank you
You're welcome!
Awesomeeeeeeeee i really love this channel =)
Wowhhh, great!! Good to know your trics; thank you PJ
You are welcome!
Very good the trick to avoid problems at the end point where they all connect.
Yeah.
very nice triks leaving small space on base surface to create small planar hole instead of nasty singularity! Also explode-rejoin to fix naked edge, clever!
Super!
Thank you ☺
You're welcome 😊
Great job!!
Thank you!
@@PJChenJewelryDesign You are most welcome, I've been using Rhino occasionally since the first beta. Over the years at my prior place of employment, we used it for many jobs. I could always get by but never really knew the advanced functions. Since my kid left for college I've had a lot of time on my hands so I took a few courses on udemy and have finally really been getting into the meat of Rhino. I recently discovered your tutorials and they have been a great supplement to burning these advanced techniques into my brain. Thanks so much for making them available to us.
PJ, great video. i have some challenges trying to copy your explode move at 13:46. After exploding and joining the surfaces, there is still an edge in the middle along the Z axis. Can you suggest what should I do?
Maybe the edges weren't aligned.
@@PJChenJewelryDesign Thank you for the response. I have another question. At 6:15 in the video, you adjusted(enlarged) the UV curve and used that as the boundary to place all the small units. The total length of all the small units will be longer than the original UV curve(created from the volume) in Y direction. Will that create an overlapping condition at the seam?
@@kungfurabbit8594 That will stretch the objects. If you trim at the correct place. it should not be overlap.
Very nice! Thank you!♡
You are welcome!
PJ thanks for making videos... I want you to make videos on vray and Clayoo also once in a week
thanks a lot mam very very useful
Welcome 😊
Thank you!
You're welcome!
i did something like this but it's a pendant. I think plot the dot on the surface and using plug in to draw curve on surface will allow to control much more.
wow again.. i look forward to next tutorial
Super.
Thank you very much
You are welcome
Bliss y’all, I was trying to rebuild the square 5,5, 3,3 and it would change and how to I select the middle to drag the center outward
turn on the control points to drag the point.
Wow😍💪💪💪💝💝💝
^_^
The Setpt command was new to me and it help me solve an issue in one of my model I thank you very much Pj you are a blessing 😇👍
You are welcome! Love to share what I know.
thank you for sharing!
You are very welcome!
Another great video. thank you so much. It would be amazing if you do a rendering based video.
I use Keyshot rendering. There are a lot of tutorial on TH-cam already. you can check them out!
Thank you very much it is a great video!
You are welcome and welcome to my channel.
Thank you
You're welcome
Thank you Pj you are the best ever, I need to do a pineapple ring and this video will help me to solve the model!! Thanks a lot,🥰💎
You're very welcome!
Thank you pj
You are welcome. Feel free to post question, Anees.
Its great lesson
Happy to hear that.
Hi Pj you really are the best , got a question does rhino gold 7 come with the jewelry and gem tab ?
Thanks
RhinoGold is no longer available, I believe. I think now it is call MatrixGold.
PJ how long have you been modeling?
20+ years
thanks mr
Most welcome
Grait work........
Thank you!
Most wlcm sir
PJ how long have you been modeling in Rhino and Matrix?
20+ years
Wow!!!!😇😇Is it normal that it's about 6 months what I started modeling but I can't modeling everything, only simple and sometimes middle difficulty jewelry?
thanks
You're welcome!
Great
Thanks
Really really good video and explanations! I will be "stalking" your videos!!
:-)
That is great!!
Cool !
sweet!
how do you empty the shank of the ring?? The ring is very heavvy
you could. The demo was focus on pattern making
Super
Super
Great! Thank you PJ, I learned a lot. Can you teach us the 3D drawing of the horse head?
Rhino may not be the best software for animal head design. I will suggest you look into zbrush or clayoo.
You are grate
Thank you!
coooooooool🤩
Sweet!
thanks pakarai
😃
Nice
Thank you, Aroldo!
I loved the simplicity of this tutorial. I did it many times but it is always giving me the same mistake. Where the seam is always remain open, others capped easily. I changed the base surface to a slightly larger, exploded it and joined. What the problem can be? I am advanced on rhino :)
when you flow along surface, is the "rigid" on or off?
rigid no, i tried also to flow the uv object both joined and seperated pieces. @@PJChenJewelryDesign
Please help PJ, everytime after flowing the surface my holes at the top and bottom won’t form planar surface , says the curves are not planar and I can’t get it
I cannot tell the issue without seeing the model. You can email me at pj@pjchendesign.com with short description
hi PJ by chance I have an order from a customer this afternoon for a signet ring witn a cabochon stone , it's what I need thanks again, when can you make a video for filigree ?
Glad it comes out on the right time for you. and yes the filigree is on my list.
@@PJChenJewelryDesign thanks Pj I can't wait to see this vidéo
nice
Thanks!
what is the difference between rhino 6 and 7 because i have rhino 7
you can check this link for all the new feature in rhino 7. www.rhino3d.com/7/new/
For me, the SubD is big in Rhino 7. it allow you to work on organic 3D modeling more precisely.
Why did you decide to use sweep 2 instead of curve network to make the ring? It seems much easier, but on a previous video you made a signet ring using the curve network tool.
You can do either way, Just want to show various techniques possible in different videos for fans to pick.
Ty
You are welcome!
If it does , how to get it ?
You can buy MatrixGold from Stuller. I use Rhino 7 for all my tutorial on this channel.
I made it like your video tips but I can not closed the open surface for the ring with tips explode and re-join.
Hi aanaga sin, make sure surfaces on both side of edge are perfectly align before you flow. If it doesn't work. you can email your model to my email at pj@pjchendesign.com I will take a look for you.
@@PJChenJewelryDesign I did it again but It has been an closed polysurfeace now, well done. I made mistake as you said my surface on the side of edges not perfectly before. Thank you so much for the trick and tips Guru PJ Chen. Good Job.
I tried to do but to me some things have wrongs
Like, the texture, when I did the command rebuild and I pull the point to up, the side of the square follow the central point. But rest went well. could you help me in it?
No so sure unless see the model. You can email it to pj@pjchendesign.com, I can take a look for you. write me a short description on where has issue.
@@PJChenJewelryDesign thank you, I did do that. but I think it not is right. But I will send to you!!
my pc got 32gb ram, octa-core processor, but it still takes a lot of time for the rhino to transfer the textures? what should be the fix?
It really depends on how detail of the texture, what other program you are running while you are using Rhino. my laptop has 16GB RAM, and it has been working fine for both Rhino, adobe and keyshot running at the same time.
how can i move a locked surface with points on in rhino 5 ,plz tell me,thanks
you have to unlocked it by right click on lock icon.
Problem in exploding says cannot explode 246 surface
hello , i need to render any design by ( gold or silver ) . How I Do It ??
i'm work on rhino 6
I use keyshot for my rendering. but if you just want to look like metal like what I have in thumbnail. That was done in Rhino 6. you can assign materials for a quick render view. I will make a show video for it.
@@PJChenJewelryDesign thank you
♥️♥️♥️♥️♥️🔯🔯🔯🔯🔯🇮🇳
Dear PJ Chen, hello. Have you seen my email? I would like to inform me.
no. did you send to pj@pjchendesign.com?
@@PJChenJewelryDesign yes ,around 2 weeks ago i have sent you
@@PJChenJewelryDesign maybe it goes to junk or spam box. please inform me. Also, all of letters of your email are small case?
Not very shocking to see all these homophobes in the comnts. There's a lot of closet cases in the soft industry
THANK YOU VERY MUCH
You're welcome!