Hi there PJ, this is the very first video i found of your work on TH-cam. I must say thank you very much. your video has been extremely helpful for me indeed. the level of work and detail that has gone into this video has been extremely clear and helpful. the pop up prompts makes it so clear for beginners like myself to see that u are working with solid or curve tools, i cant thank you enough! thank you so so so much! your level of work and clear explanations. WOW....!!! thank you!
Hi George, Welcome to my channel. It is great to have you here. Check out the rest of the videos. I am sure you will find a lot of useful tips and tricks. and stay tuned for more every week.
Hi PJ, I'm still working with Rhino5-sr9 (2014). When I do boolean union of prongs for the central stone, it doesn't work. Could you explain me if depends on my Rhino version? If yes, can I trim and join the prongs with another method? Thank you
Just solved 😊 I've created 1 prong and splitted from sup view with two diagonal crossed lines (30deg from vertical) then polar arrayed and now boolean union is ok!
Hi PJ, your are truly kind of helping people, really appreciate your great effort on making this tutorials. Many of us will benefit and that thanks a lot:) to you.
Hi Pheng. it depends on what type of surface(s) you plan to get. Sometimes they came out similar. but if you read the isocurve from the surfaces, you can tell what commands were used. There is no "better" one. The goal is to make the surface simple in order to have better mesh and better print. Loft surface is done by the curves in order. and Sweep 1 has the rail with cross-session profile. They have different direction on surfaces. In the case of making ring band, sweep1 will be"better", or you may need to make too many profiles for loft.
great tutorial as always. I am modeling this ring for practice and i noticed that yours says "closed solid polysurface " and mine says 'closed polysurface" is this just different versions of Rhino (i am using 5) or have i done something wrong? I am also getting a boolean fail when i try to join my 6 prongs? Thanks in advance for any help.
interesting. I did a test comparing Rhino 5 and 6. and it is because Rhino 6 wording differently. If your boolean is not working. it may be because the seams is over lapping. try to more one of the prong up or down 0.01 and see if you can boolean.
They both are Rhino plug-in that is why you can use all the rhino commands in both programs. However, both software is similar but each has unique command and interface, and the renderings are different.
Hi pj yesterday i sow nice internty movie looking ring like this movie but not soliter why i cant find the movie from yesterday tanks you are so profsional🙏🙏👌
Every once in a while i have trouble regarding when using Boolean union on the prongs. It gives me exclamation points on the bottom of the head. Why is that happening?
Wow I figured it out. Okay, so when you don't adjust the points on the sweep, it messes up the filletedge. It created an open polysurface and that is why it wouldn't union. After going back and adjusting the points on the sweep, everything worked much better. Thanks for the lessons! I've learned a lot
Actually I still had a weird issue. Boolean union didn't work at first, until I move one prong .01mm. Then I tried again and it worked. No idea what caused that
Would you please make a video on how to make a signet ring ??? I would be grateful if u make a video on that...And please mention me if u make a video on it...Thanks
Hello PJ, i have a question, when you drag an object it responds very smooth and organic, here its very choppy and jumps spaces when i do... some configuration on rhino?
There are few things it may affect the smoothness on the viewport. 1. Go to Options-Document Properties-Mesh. make sure your setting is jagged and faster 2. Go to Options-Render. make sure the resolution and quality is in draft quality. I like to use Ghosted when model. if it get slow, I will use wireframe mode. If every above is set right. then do you have many software opened in your computer? does your ram is enough? or sometimes restart your computer will help. let me know if those tips work.
@@PJChenJewelryDesign sorry for tooking so long, actually it was just snap spacing that was set to 1mm, put it on 0.1mm and it works! Thank you so much for the attention, im learning so much with your videos Best regards
I finally figured that out... There was a little hole at the bottom, so I created a small solid then I made a boolean union two by two (prongs) following a diagonal scheme... and it worked
If you download the stone model from somewhere else. Most of the time, they are mesh, not polysurface. You will need to use MeshToNRUBS command to turn them into polysurface first. then you can boolean them.
@@PJChenJewelryDesign ooh God! I found out I had a mistake in the prong's surface settings... Thank you for the answer!! And thanks for all video you made!
Love your tutorial PG very helpful
super!
This Video is among the most important of your work if you want to learn jewelry design. thank you for all your work.
You are welcome, Poya!
Hi PJ
I am Sandeep kumar.
I am just starting learning rihno software and it only possible through your videos.
Thank you so much.
Keep it up!
Excellent explanation. Thank You very much.
You are welcome
i'am just 16 and i LOVE this THANK YOU PJ Chen Design
Super!!
Once again, such an amazing tutorial! Thank you so much PJ :)
My pleasure!
Thanks, PJ!
You are welcome!
It's Amazing Tutorial....Thank u So Much Mam...❤️❤️👌
Most welcome 😊
Very Nice Good
Thanks
HI PJ I check evey monday for your new video, thanks you for helping me to progress in RHINO
That is awesome. I am glad my videos help!
thank you. 14:32 could you not just turn the record history on and then adjust the curve?
sure. you can.
@@PJChenJewelryDesign THANK YOU
helpful information maam thank you so much.thumbs up!
You are very welcome, Kiabe.
amazing video master pj
Thanks!
Thank you too open my mind
My pleasure
This is great, PJ. Can't wait for Part 2.
Thank you Tzuyi. Stay tuned!
Great video PJ. Engagement rings are the best to learn from.
Thank you Majd
Again I have learned new commands; thank you PJ
You are welcome Josja
I've been watching all your videos and honestly learning so much! You're making this very enjoyable to follow through.
Glad you like them!
Thank you for this tutorials it is really helpful
You're very welcome!
Hi PJ Chen 您教得很長細每個细节都很長篇，如果有中文會明白很多謝謝您。
Vincent Siu 請問你用Line 嗎。我的帳號是PJChenDesign.
@@PJChenJewelryDesign 我有用Line 的。
Vincent Siu 我的Line是PJChenDesign
Hi PJ Chen 為何您的Rhino 5是中文的，是那裡可以找到呀？
Thank You PJ. for sharing your excellent videos. If you would please explain about subdivision in rhino 6 I will appreciate it .Thanks gain
Thank you for the tutorial!!! I have created beautiful ring based on your tutorial. It helps me a lot.
That is super, Ivan.
As usual..great information.
Thank you!
great video too great was looking for same thank you so much
You are very welcome
Thanks PJ
Glad you like it
You had a very helpful information...thank you so much
You are very welcome. Glad my videos help. Let me know if you have Rhino question.
Love your tutorials. Very helpful!
Glad you like them!
I have never done cad, but Ms Chen you have given me hope lol 😍
super!
Thank you so much for your kindness!!!
You are welcome!
What size would you make the shared prongs for a .015 carat diamond (1.5mm)? It'll be 5 diamonds with 10 prongs, 8 shard and 1 each at the end.
the prong size is depends on the look. however, you don't want to cut more than 20% of thickness and no smaller than 0.4mm in diameter.
Hi there PJ, this is the very first video i found of your work on TH-cam. I must say thank you very much. your video has been extremely helpful for me indeed. the level of work and detail that has gone into this video has been extremely clear and helpful. the pop up prompts makes it so clear for beginners like myself to see that u are working with solid or curve tools, i cant thank you enough! thank you so so so much! your level of work and clear explanations. WOW....!!! thank you!
Hi George, Welcome to my channel. It is great to have you here. Check out the rest of the videos. I am sure you will find a lot of useful tips and tricks. and stay tuned for more every week.
@@PJChenJewelryDesign thank you so much :) so glad I found your channel
Thank you PJ! I enjoyed this tutorial. My skills are getting better thanks to you.
That is awesome!!
Thank you,
i am watching each of your videos.
There are amazing.
Glad you like them! please share my videos to your friends.
Thanks you for your video it helps me with my jewelry course 🙏🏾💯♥️♥️
I'm so glad!
very very nice thanks
Most welcome
Another great video, great use of Curve 2 Views, I will practice that for sure, also I never used Conic before, looks fun!
Glad you enjoyed it!
Very helpful, thanks PJ
Thank you Casey!
thank you very much sir
Most welcome
Why will my sweep1 not work on the top part of the shank?
Hi PJ, I'm still working with Rhino5-sr9 (2014). When I do boolean union of prongs for the central stone, it doesn't work. Could you explain me if depends on my Rhino version? If yes, can I trim and join the prongs with another method? Thank you
Just solved 😊 I've created 1 prong and splitted from sup view with two diagonal crossed lines (30deg from vertical) then polar arrayed and now boolean union is ok!
Great tutorial, thanks PJ
You are best
Thank you
Thanks for these awesome tutorials!
You are welcome!
Thank You PJ. for excellent videos.Thanks gain
d.huse Miskal you are welcome and welcome to my channel.
Thank you again! It looks so easy. I am going to try it!
Great! let me know how it goes. and feel free to ask if you have questions.
hi very nice job
Hi PJ, your are truly kind of helping people, really appreciate your great effort on making this tutorials. Many of us will benefit and that thanks a lot:) to you.
Hi Romulo, Thank you. I have done my best to help and hopefully more people will find my videos helpful!
It's really cool tutorial! Thank you Chen!
You are very welcome Shenzhen. And welcome to my channel!
I managed to draw the ring and with the learned command 'curve from two views' I made my own variation: TOP!
cool!
TANKS PJ VERY NICE
You are welcome!
Thank you for your work. Learned a lot And easy
to understand Especially telling each work order
that it is used. Thank you very much.
You are welcome. happy to know you like my video.
Very informative videos
Thank you.
Hello PJ Chen I wonder between Sweep1 and Loft which one is better ?
Hi Pheng. it depends on what type of surface(s) you plan to get. Sometimes they came out similar. but if you read the isocurve from the surfaces, you can tell what commands were used. There is no "better" one. The goal is to make the surface simple in order to have better mesh and better print. Loft surface is done by the curves in order. and Sweep 1 has the rail with cross-session profile. They have different direction on surfaces. In the case of making ring band, sweep1 will be"better", or you may need to make too many profiles for loft.
wonderful fundamentals
Thank you!
thank you
No Problem
Thank you for this kind of tutorials 🤓
You are very welcome. and feel free to ask questions.
Really great ideas and the easiest thank you so much 👍👍
You are very welcome, Joe!
great tutorial as always. I am modeling this ring for practice and i noticed that yours says "closed solid polysurface " and mine says 'closed polysurface" is this just different versions of Rhino (i am using 5) or have i done something wrong? I am also getting a boolean fail when i try to join my 6 prongs? Thanks in advance for any help.
interesting. I did a test comparing Rhino 5 and 6. and it is because Rhino 6 wording differently. If your boolean is not working. it may be because the seams is over lapping. try to more one of the prong up or down 0.01 and see if you can boolean.
great thanks. i trimmed a small amount off of the bottom of the prongs and it worked thanks
hello thank you very much, your videos are amazing, I am learning very well, I would like you to make more videos like this one.
You are welcome! sure, more to come. Stay Tuned!.
Очень круто. Благодарю.
You are very welcome!
Thank you!!!
You are welcome!
i use Matrix rather than Rhinogold.is there anything different in this two softwares. is rhinogold better than matrix?
They both are Rhino plug-in that is why you can use all the rhino commands in both programs. However, both software is similar but each has unique command and interface, and the renderings are different.
👍👍👍👍👍👍👍 thank you
You are welcome!
Thanks pj
You are welcome!
Hi pj yesterday i sow nice internty movie looking ring like this movie but not soliter why i cant find the movie from yesterday tanks you are so profsional🙏🙏👌
thank you very much!!!
You are welcome. Glad to see every problem is solved.
yesn, i'm glad too to find professor like you here, much succes.
Every once in a while i have trouble regarding when using Boolean union on the prongs. It gives me exclamation points on the bottom of the head. Why is that happening?
Wow I figured it out. Okay, so when you don't adjust the points on the sweep, it messes up the filletedge. It created an open polysurface and that is why it wouldn't union. After going back and adjusting the points on the sweep, everything worked much better. Thanks for the lessons! I've learned a lot
Actually I still had a weird issue. Boolean union didn't work at first, until I move one prong .01mm. Then I tried again and it worked. No idea what caused that
Thanks a lot ❤
You are welcome!
Would you please make a video on how to make a signet ring ??? I would be grateful if u make a video on that...And please mention me if u make a video on it...Thanks
Hello PJ, i have a question, when you drag an object it responds very smooth and organic, here its very choppy and jumps spaces when i do... some configuration on rhino?
There are few things it may affect the smoothness on the viewport.
1. Go to Options-Document Properties-Mesh. make sure your setting is jagged and faster
2. Go to Options-Render. make sure the resolution and quality is in draft quality.
I like to use Ghosted when model. if it get slow, I will use wireframe mode.
If every above is set right. then do you have many software opened in your computer? does your ram is enough? or sometimes restart your computer will help.
let me know if those tips work.
@@PJChenJewelryDesign sorry for tooking so long, actually it was just snap spacing that was set to 1mm, put it on 0.1mm and it works!
Thank you so much for the attention, im learning so much with your videos
Best regards
@@92blckt Great you find the solution. Feel free to ask questions.
VERY NICE , KEEP IT UP : D
thanks!
Amazing
Thank you!
Parabéns pelo belo trabalho :)
Obrigado e bem vindo ao meu canal do youtube
very god video
Thanks
Hi pj you are to good God bless you ♥ as a rahino Desingn knowing Shering so nice u thanks for u. Take care
chandu kohlli You are welcome. Welcome to my channel.
Nice
Thanks
اhi p j i like this ring thank you
You are welcome!
I love you so sar
Good
Thanks
hey PJ, I joined all the surfaces together near the end and I still have an open polysurface? any help?
Hi Michael, You can email me the model to pj@pjchendesign.com and write me a short description of what was the issue. I can take a look for you.
emailed!
I just email you back my suggestions.
Nice video
Thanks
Sar please matrix 9 video post
The boolean union of the prongs does not work and I do not know why :-(
I finally figured that out... There was a little hole at the bottom, so I created a small solid then I made a boolean union two by two (prongs) following a diagonal scheme... and it worked
That is great!
Is there any software that convert a picture into a design suitable for 3D printer?
there are some 3D scanning can scanning 3D object for 3D printing. But I do not know if there is a software can convert 2D into 3D automatically.
hello i need micro prong setting video plz tell me about micro prong in rhinno how to make this setting
Hi Sagar, I will publish an on-demand course in December on my website www.pjchendesign.com, and that will include all type of stone setting.
Hello sir make all tool review video as rhino
Thnx pj
👍👍👍👍
I dont know why, but the function boolean isn't working with the stone set...
If you download the stone model from somewhere else. Most of the time, they are mesh, not polysurface. You will need to use MeshToNRUBS command to turn them into polysurface first. then you can boolean them.
@@PJChenJewelryDesign no, i can't boolen the prongs.. :( and cant split them..
@@mariapisarevskaya7182 in that case. check if all your objects solid before you boolean them
@@PJChenJewelryDesign ooh God! I found out I had a mistake in the prong's surface settings... Thank you for the answer!! And thanks for all video you made!
You are welcome!
why is there no Indonesian translation? I really need it.
can you make mathematic sculpture
Do you have an image?
@@PJChenJewelryDesign yes i have image ,but how could i send you a image
i have send photos in facebook
This type of model is better in grasshopper. you can check on prof. Henry Segerman's work at Oklahoma State University.www.segerman.org
Nice work sar matrix 9 video gevme post
I use Rhino 3D for all the demonstration
請問有教鑽石打孔的影片嗎？
是指實做還是3D?
3D
或是更多Rhino有關珠寶設計題材
如果你的鑽石是實體的話，可以先做個圓柱體再用布林差集打出洞來
好的我試看看 感謝你的回覆
👍👍👍👍👍💘
Thanks
👍!
Thank you
p j a am from sirya and a am working jewelry 40 year if you wont anithing a am ready for you
Sar Hindi tell me please
Thanks PJ!
you are welcome!
Sar Hindi tell me please
Rhino matrix class free video jewellery th-cam.com/channels/OIkhLYYAeiSCDHKuKn49BQ.html