HUGE 3D PRINTS -- Anycubic Kobra max 3d printer review
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2024
- Here's a quick review of the $569 USD Kobra MAX from Anycubic. A large format FDM 3d printer with a bunch of cool features. check it out here: bit.ly/3wDRn5c
models:
articulated lizard - www.thingiverse.com/thing:519...
infinity cube - www.thingiverse.com/thing:499...
watering can - www.thingiverse.com/thing:460...
#3dprinting #3dprinter #3dprint - บันเทิง
I'm back ;P stay tuned for tons of timelapses
Yes
Looking forward to more mega scale prints :)
Happy to see your name in my feed again.
I watch everything at 2X speed bc I love timelapses so much
You can make a modibot plz
Epic dude great reviews and prints as always 👍
Was waiting for a new video! Happy to have you back! 👍
*Wow! This is stunning!*
Loving the chiron. This one being "updated chiron" must be incredible.
You would not believe how happy I was to see another upload! Take your time though, don't feel like you have to rush into making videos again, we can wait :)
Great to see you back! 😁🙌
Glad to see you back❤️
Very cool. Full size helmets, here I come!
absolutely!
Loving these amazing time-lapses and reviews, But what do you do with all these amazing things you have made?
0.8mm is my favorite but damn 1.2 maybe i need to upgrade my hotend again
Been missin those timelapse good sir !!!
Lots more to come! 🥳
The legend it back 😊
What slicer and profile setup did you use for the 1.2 nozzle? Basic settings, flow rates, speed ect. Just bought one yesterday after already dumping alot into and ender 3 pro.
WHERE DID YOU GET THESE MODELS? I am going to get an FDM printer soon, and this one is currently at the top of my list. I'd love to be able to try some of those out for printing.
I’m looking at buying a printer like this one, in fact I just found out about this one yesterday so I’m looking at most common things to go out which is nozzles and hot ends. Any ideas where to get both items at?
I get filament goes out but that’s expected 😂.
Thanks in advance
Hey bud great video just got mine in today. I would ask just as everyone has before me lol 1. Do you have a link to a good 1.2 nozzle replacement and 2. Could you be kind enough to share the setting and or profile good Sir,would be greatly appreciated.
Ima save up for one of these thank u
what did you do the time lapse with? can you detail please? I also have the kobra max. Thanks
Hey would you mind sharing your profile settings for cura and where you bought the nozzle. I just got mine last week and def want a bigger nozzle to reduce print time
Based on reviews some of these still catch fire/smoke. 2 of my chirons smoked so I see they translated that. (Chirons had been supplied with a defective power switch). Same with one of the any cubic Delta. I received a notice when I ordered that switch replacement by the power company (wrong ground setup) but any cubic never notified customers. Still, when it runs well it's great. Used by many (including several units myself). It's the size/price King.
What are the settings for .8 nozzle and 1.0?
Great review. I just ordered this. Will be my first FDM printer so have some learning to do. Have been on a resin for just over a year now. I wanted to go ahead and order one of the 1.2mm nozzles you mention in the video. Could you provide a link to one I can purchase? Don't know anything about nozzles so want to make sure I pick up the correct one. Thanks.
Should be a e3d volcano nozzle
hey I am looking to buy the same printer how are things going with it does it have some major problems ?
You should try some of 3D tomorrow’s filament
I’ll look into that!
1.2mm nozzle? Yes please! My Kobra Max arrives this week and I'm curious about going with such a big nozzle. Do you have to slow down your prints to push that much filament through?
sweeeeeeeet! I've been looking for a replacement for my CR-10S with volcano hot end and this is the ticket (the aluminum bed is so warped that even with boro glass I have to retram every few prints). I print with a 0.8mm nozzle and would love to know your settings for 1.2mm so I have a starting place.
check that the wheels on your bed are properly tensioned, that could be affecting the longevity of your bed level. I'm using stock cr-10 settings with updated extrusion widths to 1.2 as well as a %5 bump to infill outer wall overlap. Hope that helps! :)
@@WildRoseBuilds I will definitely check the wheel tension - thanks
Great video, I cant stop replaying this review, can it print Polycarbonate?
Where i can get the files for the cubic articulatori intercalate
Please share
@WildRoseBuilds Could you share where you got the 1.2mm nozzle from? Big Thanks.
Oooh my lizard! He's HUGE. Thanks for the reference and great video, checking this out when I'm looking for an upgrade! :)
Can you say how fast you had the print speed set at and layer hieght when you did the first print
What are you doing about bed adhesion? I can't get my prints to release and to top it off I've pulled up some of the glass.
Great video, can you tell me how much space I would need for this machine? I know the dimensions, but I feel like it needs a bigger space for things to move around while printing.
Found the answer myself in case someone needs it. th-cam.com/video/n9iP_wplrno/w-d-xo.html
Does the supply for the 3d printer come with a wrench for the nozzle
can you share the profiles used for the 1.2mm nozzle?
ditto, im having a lot of trouble getting cura to work with my Plus
Do you have a link to the nozzle replacement.
Would you mind doing a Kobra 2 max review?
What file types are used in this printer to pint? Which program to use?
I want that lizard so badly, do smaller models of this exist say for a ender 3 v2?
Hmm. I'm waiting on my Prusa XL. In the end, wonder how they would compare....
prusa xl is another league, can't be compared
What colour filament did you do that lizard in?
Im looking to get into 3d printing, and want to print some rather large items do you think this would be a fine choice for a beginner?
large printers can cause more issues. but if you want to print large items and take this into consideration i'd say the answer is yes. i'd recommend it over the chiron especially if you're a beginner because it has many more features that makes life easier. also it has features out of the box that are often built into a chiron afterwards by the users and for a beginner that's no easy task.
A volcano CHT, even at 0.4, should do great on here.
It looks like a great printer.
thanks for watching!
Do you have a link for the 1.2 mm nozzle that you used for this? I’m having a hard time finding a good one!
If u found a decent I d appreciate if u dropped the link :)
Settings for the 1.2mm nozzle PLEASE???
You're going to want to carefully remove those clips on the side of heat bed as a bunch have reported failures with them shorting out the heating element.
Apparently the issue is if they're installed in the wrong spot, as in not the exact place in the manual. Hoping that's the case so mine doesn't fry 😂
Imagine scaling this model and was not expecting the handle wouldn't be useful anymore. Hilarious
How many rolls of filament did it take to make the lizard? And which filament did you use? I really would love to make this lizard for my grandson. Also, where can I find the file? Newbie here, need all the help I can get. Please 🙏🏻
Hello Maria,
At first; sorry for my Bad english.. i'm from Germany.
I think there is 1kg filament enough.
And the file is below the video description, but i took it under my comment.
I'm back home on Tuesday night, then k will prepare all settings, getting a bigger nozzle on it then i'll print the lizard. Then i can tell u how much filament.
Best regards
Hey I hope you see this message can you please share the profile you used for 0.6 and the even bigger nozzle.
I just bought a Chiron a month ago. What does the Kobra Max offer over the Chiron?
auto bed leveling
Jesus christ you could prob print two helmets at once on that thing😂
So I bought the kobra max and was wondering if anyone had any tips for a beginner like me
you should watch reviews/tutorials of the vyper because the kobra max is basically the same thing, only bigger.
do you have a profile for pursa for this 1.2 nozzle?
i dont. prusa slicer has some larger profiles in the profile wizard. not a 1.2 but the .8mm profile should get you close
Fisher Price! Ordered one & Sent it straight back, It turned up used with a failed print left on the machine.. I Guess that's what you get for £500 so I purchased the Creality CR M4 instead.
Did you order through Amazon?
@@WildRoseBuilds Yes Anycubic only ship to the UK through Amazon, I can't purchase the Kobra Max from their site.
Anycubic don't stand behind there printers. I have a problem trying to send back only 12 days of having it. but can't get support to help at all
looks like a good printer..time for an upgrade fromm ender possibly.
Love the review. Of great surprise to me, my husband said the other day, “I want to get that printer.” Followed by, “I just bought it.” Whaat?! This was not like my husband, who has teased me for getting more printers. We're on vacation with the family this week but when we get home, the Kobra Max will be waiting for us. I can’t wait so start printing with it! What brand do you recommend for nozzles because I was thinking the same thing, a bigger nozzle would be ideal for a many models. Love the watering can!
I just threw a cheap amazon nozzle on this one, i'm not sure which of the reputable brands make a 1.2mm! Congratz on the new printer, and i've been loving the filament showcases and the timelapses you've been putting out!
@@WildRoseBuilds I found a cheap Amazon set of varying sizes and got them. Cheap works for me! I'm really looking forward to printing some big things and using the bigger nozzles to do so. Cheap works for me! I always watch your videos as soon as I get notified they're out. You pick great models. I can’t wait to see what you print on this huge printer next!
e3d has a variety of volcano 1.2 nozzles.
@@ruffryder1337 and the e3d price tag 🥵
@@WildRoseBuilds well in my opinion they are worth it. last long and are better machined. i guess sth like trianglelabs is a good alternative though.
where i can find the files articualte
What is the price of this printer
How do you do these time-lapse videos!?
octolapse ;)
Why does this printer use bowden tube instead of direct?
no idea! will mod eventually for sure, the build volume on this machine is super useful.
動画の撮り方がかっこいい
Where did you get the file for the lizard
Sold out in Canada. I'll recheck. Yup, still. :(
They’re probably rolling out the initial wave of stock right now!
@@WildRoseBuilds here's hoping. My sister and I would love one to churn out big piece cosplay bits :)
Omg so good price omg most other are like 2000 omg
2:17 wait that's illegal
Would pay you a beer if you could share your print settings... plz plz plz
захотелось мороженого
Not really a review, is it? You printed some things.
IGN- 10/10
I think your 3D printer is lactose intolerant.
Пластик идёт на говно :(
Fake footage as if the lizard just came off the bed without any work at all. I do not appreciate it.
Coated borosilicate beds release prints after they’ve cooled. Lmao
Review, not in depth enough
3:20 thanks for colors of Ukrainian flag! Glory to Ukraine!
I just saw your video from 6 months ago and left a message. Please confer with me or let me contact you . I'm an artist and I need your talents. I can use a talented person like you to help me make 3d art. Your work is absolutely Top Drawer.
what did you do the time lapse with? can you detail please? I also have the kobra max. Thanks
Glad you posted the video, i also checked your Instagram, No post was there as well. I thought something else 🧐😁😶