Hoping for a bit of advice. My rocco window is not sitting straight(slight gap on one side) I am looking at removing the door card but is there even anywhere to adjust it? I have tried resetting limits etc but one side is fully closed so doesn't help at all.
I know it's not right but I think you Replace the door Mirror without taking the door card off. If your not to fussed about the wiring plug just leave it inside without plugging it.and just adjust it by hand
Thanks for this so helpful! So a question for you brother. I changed the regulator and it works fine, but the window doesn't auto drop when opening door, and the 1 touch doesn't seem to work either anymore. I have done the window reset but still no luck...any tips what could be causing it?
Trust me it's a tricky one this. The way I do it is when I put the regulator and motor back on I make sure the glass is all the way to the top. Then it should automatically learn itself. Also just give it few mins it should be ok
Try pulling the both window switches up and holding up for about 10 seconds see what that dose. If that doesn't do it I think you just need to adjust it accordingly. Very hard to describe via txt
@@TEAMR4ULTV thanks man I'll have a tinker tonight! Shame you're not near Leicester otherwise id be straight over! Jzk for the advice, I'll let you know how it goes!
No problem at all any time. Sorry I couldn't be more helpful its very hard to know what's wrong without looking at it. Hope you manage to sort it out. Let me know what it was
My scirocco doesn’t have the 3 screws in the middle part by the door Handel
Hoping for a bit of advice. My rocco window is not sitting straight(slight gap on one side) I am looking at removing the door card but is there even anywhere to adjust it? I have tried resetting limits etc but one side is fully closed so doesn't help at all.
I had similar problem. I left it went all the way down then up few times then it just sorted it self out
Can you please help, changed the door lock actuator/mechanism but the bracket holding it has broken, a am worried this will not hold
I'll be honest I have to have a look at it to be sure. Just try it see what happens
@@TEAMR4ULTV doesn't seem to be anyway of getting it out without breaking the bracket,
Also do you have a video how to get the glass out?
Is it necessary to take the card off to replace the full wing mirror? Any advice appreciated
You have to take the door card off in order to fit the wire plug for the door Mirror.
I know it's not right but I think you Replace the door Mirror without taking the door card off. If your not to fussed about the wiring plug just leave it inside without plugging it.and just adjust it by hand
Thanks for this so helpful! So a question for you brother. I changed the regulator and it works fine, but the window doesn't auto drop when opening door, and the 1 touch doesn't seem to work either anymore. I have done the window reset but still no luck...any tips what could be causing it?
Trust me it's a tricky one this. The way I do it is when I put the regulator and motor back on I make sure the glass is all the way to the top. Then it should automatically learn itself. Also just give it few mins it should be ok
@@TEAMR4ULTV thanks man..its been like this since yesterday and no luck so far..im thinking maybe faulty micro switch could be the case
Try pulling the both window switches up and holding up for about 10 seconds see what that dose. If that doesn't do it I think you just need to adjust it accordingly. Very hard to describe via txt
@@TEAMR4ULTV thanks man I'll have a tinker tonight! Shame you're not near Leicester otherwise id be straight over! Jzk for the advice, I'll let you know how it goes!
No problem at all any time. Sorry I couldn't be more helpful its very hard to know what's wrong without looking at it. Hope you manage to sort it out. Let me know what it was
Do u have rear card removal vid
Sorry I dont. But next one comes in I'll do one
Good video. Is there a way to remove some metal from the door to make it lighter 😂
Lol
Working class hero
People who use latex gloves are not mechanics.
White Nitrile gloves
Brother you need to sort a stand for your phone .
No worries bro I will one day
Отвёртка на пластиковые детали... После этого выключил видео