I bought a 5810 off Ebay for $200 with 14-core Xeon. The biggest surprise is that it had a Quadro P4000 and 64-GB of ECC RAM installed. I bought a PCIe M.2 adapter that allowed me to use a faster NVMe drive instead of a SATA SSD. It was for my 12-year old grandson who kicks butt on games.
Loved this video …. Defo need more of this …. Clearly the views indicate how popular this vid and other similar ones are. Thank you for this video. Helped me out a lot . Love the sarcasm
Nice video ... I have upgraded my Dell T5810 with a Xeon E5-2678 v3 processor which has 12 cores and runs like a deer! Also I have two Micron DDR4-2133 32 GByte memory cards which is plenty for my CAD operations. I also run a NVIDIA GeForce GTX 1060 6GB graphics card which again does a good enoigh job for my CAD work. Overall the power draw is very low now with this graphics card (I have the same 685W power supply but I am drawing around 200W ). I have two Dell 1900 x1200 24inch screens for my general work which are nice. Thanks for sharing the SSD pricing - I didn't realise how low the BX500 1TB SSD had dropped to. Does your motherboard have SATA or nVME slots? - the later ones did I think - certainly the T5820s do!
Nice config and Monitor set up 😉, and yes, the prices of ssd keeps dropping by the day, even the high end Samsung EVO! nVME slots on the mainboard.. hmm not so sure, can check it though tomorrow when i get to the warehouse.
@@j.lietka9406 I think it was around GBP60 but there are a lot of cheap ones on eBay now. I bought it from a Korean vendor which I trusted and all worked out well.
You want 4x Ram modules to make use of the Quad channel memory performance! so better to get 4x smaller modules than 2x big ones! Mine has a e5-1660 V4 CPU as I use for games so better Ghz speed on less cores, with 4x 4GB 2133 and a GTX970 (serves good as a second gaming PC for the living room)
hello everyone i want to upgrade my t5810 it will be used for some gaming and general tasks. what is a good CPU and GPU i should get? it currently has a xeon E5-1603 v3, quadro k620, 685w PSU and 16GB ram
I have a t5810 , 500 gb ssd, DIMM, 4GB, 2133, 1RX8, 4G, DDR4, Processor: PRC, E51620V3, 3.5, 10M, HSL, R2 . It takes 1 min before splash screen appears. Many owners have complained about the same very long boot time. A much cheaper i3880 is much faster and boots far, far faster. I can't figure out from your video how you got boot down to 28 sec. Your splash screen appears after just a few seconds. The GPU isn't even accessed until after the splash screen. Any suggestions?
I got one of these last month for £75 and it had a xeon 2680 v4,32gb ddr4 2400 ram,500gb ssd,2tb hdd and a 685w psu,put a rx 6600 xt in it and runs games like nothing at 1440p and 4k.
I need help I have Dell5810 intel xeon e5 1650v4, k620, 265gb SSD and 500gb hdd Whenever i turn ON my pc it shows logo and goes black for 40secs then again logo show up and take 60secs to load up/ start
I have dell precision t7810 With dual processor E5 2650 v4 24 logical cores combine 48 threads And 32gigs of ecc ram and 512 gb ssd And 1tera hard drive with quadro m4000 8gb The score on cinebench is around 18k And windows 11 isn't supported Any suggestions what should i do
Brother i have a huge problem with my same pc it stops on the dell logo after many attempts of restarts it will turn on please help me with this problem thanks
Hi there, I recently acquired a T5810 workstation which has a xeon e5-1620 v3, meaning its only a 4-core. Would it be worth upgrading this to one of those 12-cores? It is going to be used for gaming and I plan to pair it with an rx 580. Cheers!
@@tom04_2 Xeon(R) CPU E5-1650 v4 @ 3.60GHz, 32 GB ram, Asus 1080ti turbo 11GB, (1) 250 gig Samsung nvme on NVMe to PCI-E Express 3.0 X16 Adapter Card for the OS, (1) 1tb Samsung nvme on NVMe to PCI-E Express 3.0 X16 Adapter Card for storage, 1300watt power supply, Asus 2.5 gigabit network card. My son runs basically the same thing, but with 825watt power supply, Alienware 1080ti, 16 GB ram, 1tb Samsung SSD drive, and Xeon(R) E5-2637 v4 @ 3.50 GHz. We play any game we want on low settings for low latency. This is for high speed fighting on games like Fortnite. "Slow" games can be run on high/ultra settings. The only two types we lose from are fiber internet players, and ones with hacks like wireframing/aimbots. I ran a 3070 in mine, but RTX is a gimmick, and high/ultra is only good in Minecraft I.M.O..
🔥But it now
hardwaremoney.de/b/dell-precision-t5810
I bought a 5810 off Ebay for $200 with 14-core Xeon. The biggest surprise is that it had a Quadro P4000 and 64-GB of ECC RAM installed. I bought a PCIe M.2 adapter that allowed me to use a faster NVMe drive instead of a SATA SSD. It was for my 12-year old grandson who kicks butt on games.
Really?? Lucky you😉the P4000 in itself already is worth more than $200!
14 Core Xeon for $200 ??
Super analysis. Thanks for taking time to do a thorough job here.❤ U
Thanks 😉
Loved this video …. Defo need more of this …. Clearly the views indicate how popular this vid and other similar ones are. Thank you for this video. Helped me out a lot . Love the sarcasm
@@memeczar1956 thanks for the feedback 😉
You can actually use an NVME SSD in a pcie slot with a x1 or x4 adapter.. I run my T5810 with an adata 128gb as a boot disc.
thanks for the tips 😉
me too 😅
how, i try nvme not detected in bios but detected in windows.
Nice video ... I have upgraded my Dell T5810 with a Xeon E5-2678 v3 processor which has 12 cores and runs like a deer! Also I have two Micron DDR4-2133 32 GByte memory cards which is plenty for my CAD operations. I also run a NVIDIA GeForce GTX 1060 6GB graphics card which again does a good enoigh job for my CAD work. Overall the power draw is very low now with this graphics card (I have the same 685W power supply but I am drawing around 200W ). I have two Dell 1900 x1200 24inch screens for my general work which are nice. Thanks for sharing the SSD pricing - I didn't realise how low the BX500 1TB SSD had dropped to. Does your motherboard have SATA or nVME slots? - the later ones did I think - certainly the T5820s do!
Nice config and Monitor set up 😉, and yes, the prices of ssd keeps dropping by the day, even the high end Samsung EVO! nVME slots on the mainboard.. hmm not so sure, can check it though tomorrow when i get to the warehouse.
How much did the upgraded CPU cost you?
@@j.lietka9406 I think it was around GBP60 but there are a lot of cheap ones on eBay now. I bought it from a Korean vendor which I trusted and all worked out well.
You want 4x Ram modules to make use of the Quad channel memory performance! so better to get 4x smaller modules than 2x big ones!
Mine has a e5-1660 V4 CPU as I use for games so better Ghz speed on less cores, with 4x 4GB 2133 and a GTX970 (serves good as a second gaming PC for the living room)
@@keanankruse True 😉
hello everyone i want to upgrade my t5810 it will be used for some gaming and general tasks. what is a good CPU and GPU i should get? it currently has a xeon E5-1603 v3, quadro k620, 685w PSU and 16GB ram
I have DELL T5810 2650 V³
16GB RAM
128 SSD
2TB HDD
K4200 GRAPHIC CARD
so I have to make it for gaming, now what else should I add to it?
Change that gpu out for a rx 6600 xt and get a 8 pin pcie connector and ur sorted for gaming
I have a t5810 , 500 gb ssd, DIMM, 4GB, 2133, 1RX8, 4G, DDR4, Processor:
PRC, E51620V3, 3.5, 10M, HSL, R2 . It takes 1 min before splash screen appears. Many owners have complained about the same very long boot time. A much cheaper i3880 is much faster and boots far, far faster. I can't figure out from your video how you got boot down to 28 sec. Your splash screen appears after just a few seconds. The GPU isn't even accessed until after the splash screen. Any suggestions?
Please how do I install extra exhaust fan at the back of this PC 5810. Help me out bro
but why do you need to?
I got one of these last month for £75 and it had a xeon 2680 v4,32gb ddr4 2400 ram,500gb ssd,2tb hdd and a 685w psu,put a rx 6600 xt in it and runs games like nothing at 1440p and 4k.
great price!😉
@@Hardwaremoney yh got lucky as this exact spec goes for around £250 to £280 and that's without the gpu that I picked up for £150👌
To get a full height GPU in I had to drill out the rivets and remove the big crossbar on the case lid. It wasn't too hard but a bit of an obstacle
oh really? my M4000 went in without any hassles
i am planning to get this build with RTX 3060 Dual Fan, would this be an issue as i don't understand what rivets and crossbar were a problem for you
@@rayyanberg8974 hi
Were you able to install 3060 to dell t5810 ?
@@grigoryvasiliev-ih5iz i didn't get the workstation
Any links to good ram options you would recommend. Want to upgrade my 2 4gb 2133 sticks to 2 or 4 8gb 2400 sticks and looking for some good deals.
guess you finally sorted it out 😉
I need help I have Dell5810 intel xeon e5 1650v4, k620, 265gb SSD and 500gb hdd
Whenever i turn ON my pc it shows logo and goes black for 40secs then again logo show up and take 60secs to load up/ start
did you update the bios?
@@johnvijver3815 ye
you might want to check if the graphics card driver is installed, also upgrade the bios. this is how i will start in finding the cause of ghe problem😉
I have dell precision t7810
With dual processor E5 2650 v4 24 logical cores combine 48 threads
And 32gigs of ecc ram and 512 gb ssd
And 1tera hard drive with quadro m4000 8gb
The score on cinebench is around 18k
And windows 11 isn't supported
Any suggestions what should i do
check out the work around install videos on youtube, should help 😉
Brother i have a huge problem with my same pc it stops on the dell logo after many attempts of restarts it will turn on please help me with this problem thanks
hmm strange, that are a million reasons why this could be, might try the regular troubleshooting tips here on yt, hope one helps 😉
Hi there, I recently acquired a T5810 workstation which has a xeon e5-1620 v3, meaning its only a 4-core. Would it be worth upgrading this to one of those 12-cores? It is going to be used for gaming and I plan to pair it with an rx 580.
Cheers!
I own the same system and my cpu is xeon e5 1660 and gpu 4060 ti and is giving me 110 fps on horizon forbidden west and 200 fps on cod mw3
THANK YOU!
you are welcome 😉
dell t 5810 workstation supports 512 gb ram and Xeon E5-2699v4 22core 44threds) proc
thanks for the info 😉
Only one of the front ports is USB 3.0
My gaming t5810 boots in 15 seconds max.
wow 🤩 thats fast!
what specs does it have? i want to upgrade mine to be able to handle gaming and some other things :)
@@tom04_2 Xeon(R) CPU E5-1650 v4 @ 3.60GHz, 32 GB ram, Asus 1080ti turbo 11GB, (1) 250 gig Samsung nvme on NVMe to PCI-E Express 3.0 X16 Adapter Card for the OS, (1) 1tb Samsung nvme on NVMe to PCI-E Express 3.0 X16 Adapter Card for storage, 1300watt power supply, Asus 2.5 gigabit network card. My son runs basically the same thing, but with 825watt power supply, Alienware 1080ti, 16 GB ram, 1tb Samsung SSD drive, and Xeon(R) E5-2637 v4 @ 3.50 GHz. We play any game we want on low settings for low latency. This is for high speed fighting on games like Fortnite. "Slow" games can be run on high/ultra settings. The only two types we lose from are fiber internet players, and ones with hacks like wireframing/aimbots. I ran a 3070 in mine, but RTX is a gimmick, and high/ultra is only good in Minecraft I.M.O..