0:54 I love how the "Safety is a State of Mind" sign is hidden behind a wall, but the most prominent sign in full view is the "TARGET 60 TRIPS/SHIFT". Just to make sure they know what their priorities should be!
What a performance!!! As mentioned by others, if must use a crane, make sure cables are "locked" onto the crane hook to prevent accidental slipping off of the cables and associated equipment! Perhaps a screen should (have been) built across the crusher entry to catch oversize rocks/boulders!? This would most likely have prevented this situation of an "oversize" or "odd shaped" boulder being jammed at the crusher entry in the first place. And maybe add a remote jack hammer mounted on an extensible hydraulic arm to enable breaking up large boulders/rocks at the entry to the crusher that may be caught up or jammed. This would speed up clearing any obstructions very quickly and minimize downtime!
or maybe weld a beam across the shovels of the excavators so too big boulders can't be caught. Main problem also seems to be that one guy commands and another one operates the crane. Nothing good can come out of this. "Up up up".. do it yourself then!
@@AndreasDelleske Good idea on the beam on the excavator bucket. Probably reduces loading capacity, but it's a cheap and quick intermediate solution which saves all lost the boulder jam time already.
this video is a good therapy for sleep amazing old system to unlock the crusher take all day for two stones jajajjaja I sleep for 21 minutes veri good tks a lot LOL !!!!!!!!!!
Couldn’t agree more they need to modernise it to increase production.The hydraulic hiab crane system with the pry bar attachment on western crushing plants is far superior.This system reminds me of fishing LOL
I’m surprised that they still have a job. Every minute is $$$$ lost…for the entire operation. If a boat is delayed because the crusher was down.. 1 hour that is millions of dollars lost… After 15 minutes of down time they had 3 full minutes between trucks to clean the entire thing and they were sleeping…
Reminds me of one of those arcade grab machines where you wind handles to move the grap to win - nothing. Spike and hook need serious re engineering.... Both good at unblocking boulders with the slow useless crane and driver
3:12 не проще было спустить туда приспособу вроде гидравлического отбойного молотка такие иногда используются при разборе домов на гусеничной или колёсной тяге ? Чем вот это вот удить в унитазе на сухарик ?
2nd video from this place ive watched and i got no idea where it is but its seriously mis-managed and underfunded , they must loose 10's of thousands of dollars in downtime
I can't wait for the spear to fall off the hook because the cable holding the hook isn't locked in. Can't imagine the fun they'll have retrieving the spear or any other device then.
How does his facility make any money with equipment like that? That was one of the most frustrating things I have ever watched. Talk about ALL the wrong tools for the job.
Boy, that's a heck of a mess..😳😱aren't the boulders supposed to be blasted up into smaller pieces before they're dumped in the Crusher? This doesn't look like it works out very well!😆😧
it like use sedan tires for F1 car. why you dont use rock breaker. i think cost of electricity used by gyratory crusher during jam time cover cost of an in-situ rock breaker after couple months.
India style "Crush operation team" with Japanese way [Kobelco crusher] of report to their management when they need to write an incident report. This is not their fault [even with improper tools to solve the problem] of the delay in crush operation. Crush Operation manager and his team are "solving the problem" with the best "tools" they have. This problem is cause by the blast team, load operator and the dump truck driver, reason is: 1.) Blast team should make sure all the blasted stone small enough to fit the crusher 2.) Load operator(excavator/wheel loader) should "check and make sure" when loading material to dump truck no large stone loaded to dump truck 3.) Dump truck driver should make sure all the material dump to the crusher will not cause the crusher block by any stone 4.) This crusher we are plan to use more than 100 years, so we make sure the tools that we use to solve the problem will no cause any damage to the crusher. Conclusion : This problem is cause by others, and they created so much of problem and delay to the crush operation and to our company".
@@rnash999 yes truck dump drivers cannot see what's getting loaded the loader driver I guess is primary operative who needs to be rejecting oversized chunks. If excessive amounts from blasting poorly then pass that info back to them to hopefully influence positively the grade of material size.
Here crane operators are well paid, most likely not here, there is a hierarchy of the people yelling, loudest is the highest paid individual, if things were accomplished in a more efficient manner, you've eliminated about 5 jobs, they need jobs, even dangerous ones. This is only my opinion based on 27 years in the military and 15 more as a GS, I would see it every day, inefficiency creates long term employment lol
Any chance you could hold the camera a little more still, and stop with all the zoom in / zoom out and changing focus? And yes... the guy yelling and that hook arrangement are really maddening... can the operator not see the hook??
It hurts so much to see these senseless and frustrating efforts. But I just can’t stop watching it. Is it because something is wrong with me - or am I just waiting for the moment when they come along with any smart idea?
I CAN ALSO PUT AN EXCAVATOR WITH A MORE SPECIAL ARM THAT CAN CLEAN THE SOIL THAT DOESN'T GO TO THE CRUSHER AND THAT CAN MAKE IT MUCH EASIER TO REMOVE THE STONES THAT LOCK AT THE ENTRANCE.
Awesome machine. Shame about the jams/blockages. Surely in this day and age there must be a better solution than some guy dangling a rod in a hole with no idea what he’s doing. Just sayin’ 🤷♀️
0:10 That safety sign... Like one time a year the boss comes looking and told them to put this safety sign somewhere. Then they hide it behind a closed fence 😂
You, guys need to implement boom of sufficient reach from mobile scrap metal crane, with rotary ''clamshel construction/demolition claw thing''. This is really not efficient..
Damn! That crane operator must be on an hour pay scale. I sure would shorten the cable between the hook and cable to have better control. And sounds like to many chiefs talking and no one working.
I thought of a dozen different ways to break up these rocks just by watching this cluster mess. Sounds like 15 people trying to tell the operator what to do. Good luck with this cluster f%%- k.
Why don't they just get an old back hoe with a spike attached to clear the jam rather than mess around with a overhead crane? Seams to be the least affective way there using lol
@@keithwaterhouse2845 😂😂 Imagine the crane is going down and you give instruction to stop and he keeps going for 10 more seconds 😂 And really... those rocks are over a meter in diameter weighing many hundreds of kilos, good luck with your crowbar. You don't even want to be in a position to be able to use a crowbar, as soon as stuff starts moving it will squash you with hundreds of kilos of force.
Ahhhhh! Im tearing my hair out with frustration. Got to be a million better ways to shift those rocks than that.
SACK THE LOT INCOMPETENT
An escavator arm with a jackhammer in the corner is what modern-day crushers use to keep production going. It would of just paid for itself.
In one week paid of. But seem they prefer here anoykng and screaming with each other instead of a helpful instalation...
The best bit is the crowd shouting instructions 😀
Ewoks
Sounds like every spectator is a expert crane operator but the one on the controls should be sweeping up😂
The truck drivers must be exited with that crusher...1 hour work 7 hours watching the guy giving instractions
0:54 I love how the "Safety is a State of Mind" sign is hidden behind a wall, but the most prominent sign in full view is the "TARGET 60 TRIPS/SHIFT". Just to make sure they know what their priorities should be!
This is a mega version of the most frustrating claw game ever!
Isso não é produtivo é muito ruim.
Ese gancho es perdida de tiempo
The crane operator must be 90 years old.....every move is on a 10 second delay!
Have you ever actually operated a crane or are you just bashing someone?
He's being truthful❗️@@SV_Try_Magic
It's actually just plain physics due to the design.
I'd be willing to bet that the crane is 90 years old and just moves that way.
Could you do any better??
Better enjoyed at 2x speed everyone!
You are missing the point. Try looking at 0.5x speed. Be careful not to die of boredom.
What a performance!!!
As mentioned by others, if must use a crane, make sure cables are "locked" onto the crane hook to prevent accidental slipping off of the cables and associated equipment!
Perhaps a screen should (have been) built across the crusher entry to catch oversize rocks/boulders!? This would most likely have prevented this situation of an "oversize" or "odd shaped" boulder being jammed at the crusher entry in the first place.
And maybe add a remote jack hammer mounted on an extensible hydraulic arm to enable breaking up large boulders/rocks at the entry to the crusher that may be caught up or jammed. This would speed up clearing any obstructions very quickly and minimize downtime!
or maybe weld a beam across the shovels of the excavators so too big boulders can't be caught.
Main problem also seems to be that one guy commands and another one operates the crane. Nothing good can come out of this. "Up up up".. do it yourself then!
@@AndreasDelleske Good idea on the beam on the excavator bucket. Probably reduces loading capacity, but it's a cheap and quick intermediate solution which saves all lost the boulder jam time already.
Nice speech, now go make some coffee.
Great job guys 👍👍👍👏🏻👏🏻👏🏻
The sarcasm 😂😂
From the camera angle this crusher may look small but pretty sure it's huge. Seen lots of them with that type of hook to handle rocks that size.
Un brazo hidráulico con un punta rotomartillo ayudaría bastante a aumentar la productividad
the 2 guys yelling at the operator like hes blind lmfao
😂
how come they don't have a long stick excavator for use just in case of jams?
люди не шукають легких шляхів
@@Sasha-nu1zn And you are expecting everyone to throw your comment into a translator?
i didnt even know a boulder jam could be so exciting, is it going to fall in or stay all day, i guess we will never know.
DRAMA!
I know. More exciting than Coronation Street. At least we know this is real. 😅
What is life of cone mantle & how much time it will take to change.
Nice job 👌
😂😂😂😂😂 Right 🫤
@@stevenr8606 🙏❤️🙏
Finally a human crane that can rival a Sloth.
What are these tiles? Space shuttle stuff auctioned off? Awesome machine!
Wear plate to protect base metal
With such a crane operator, there is no need for war.
What on earth were they trying to accomplish with that hook? They would have better luck pushing a chain!
Przy takich problemach zablokowania kruszarki najlepszy jest młot hydrauliczny.
this video is a good therapy for sleep amazing old system to unlock the crusher take all day for two stones jajajjaja I sleep for 21 minutes veri good tks a lot LOL !!!!!!!!!!
So cool
this is so inefficient its unbelieveable.looks like a fair ground stall hook a duck
Certain size grizzly bars above the trucks when they get filled up by the excavator?
I've seen some fart-arsing around in my time and this one's right up there.
Yes I agree what a pathetic set up.
Couldn’t agree more they need to modernise it to increase production.The hydraulic hiab crane system with the pry bar attachment on western crushing plants is far superior.This system reminds me of fishing LOL
@@stanleyadamson912 à ni ni
Third world mentality.
Why don't they use a long pole to push the hook round and hold it in the right position till it gets a telling purchase?
В начале видео используют пику интересное решение, у нас в таких случаях в ход идёт кинул с дробилки заострённый к низу 90 тонн входит как в масло.
I just think about how INEFFICIENT that method is at clearing obstructions. It frustrates me to no end
I’m surprised that they still have a job. Every minute is $$$$ lost…for the entire operation. If a boat is delayed because the crusher was down.. 1 hour that is millions of dollars lost… After 15 minutes of down time they had 3 full minutes between trucks to clean the entire thing and they were sleeping…
Reminds me of one of those arcade grab machines where you wind handles to move the grap to win - nothing. Spike and hook need serious re engineering.... Both good at unblocking boulders with the slow useless crane and driver
The motor-controls on the crane are very simple: on or off.
No slow-speed, no anti-sway software...
It's very easy to over-shoot the mark.
3:12 не проще было спустить туда приспособу вроде гидравлического отбойного молотка такие иногда используются при разборе домов на гусеничной или колёсной тяге ? Чем вот это вот удить в унитазе на сухарик ?
2nd video from this place ive watched and i got no idea where it is but its seriously mis-managed and underfunded , they must loose 10's of thousands of dollars in downtime
I can't wait for the spear to fall off the hook because the cable holding the hook isn't locked in. Can't imagine the fun they'll have retrieving the spear or any other device then.
Yeah, that would be a kick in the pants!😆
How does his facility make any money with equipment like that? That was one of the most frustrating things I have ever watched. Talk about ALL the wrong tools for the job.
21:30 Upper left hand corner. UFO or shooting star
Had to turn off at 14:00 as i had to go out, does anyone know if he has he cleared the rock on the left yet?
No! At least, not in this video - they just resumed dumping!
That hook is kind of like when my arm goes to sleep.
Smaller hook would be much better and faster at getting the job done.
Boy, that's a heck of a mess..😳😱aren't the boulders supposed to be blasted up into smaller pieces before they're dumped in the Crusher? This doesn't look like it works out very well!😆😧
it like use sedan tires for F1 car. why you dont use rock breaker. i think cost of electricity used by gyratory crusher during jam time cover cost of an in-situ rock breaker after couple months.
Three shifts later we were back in production
It’s Austin Power’s moment. “And now I’m going to unclog this contraption, with a ridiculously slow method…
What is the electrical power of such a 1600 Tph crusher?
500 to 600 HP
now heres where a small rock breaker would come in to use..
when you put a small 1 foot claw 90 degrees from the point you will get leverage
India style "Crush operation team" with Japanese way [Kobelco crusher] of report to their management when they need to write an incident report.
This is not their fault [even with improper tools to solve the problem] of the delay in crush operation.
Crush Operation manager and his team are "solving the problem" with the best "tools" they have.
This problem is cause by the blast team, load operator and the dump truck driver, reason is:
1.) Blast team should make sure all the blasted stone small enough to fit the crusher
2.) Load operator(excavator/wheel loader) should "check and make sure" when loading material to dump truck no large stone loaded to dump truck
3.) Dump truck driver should make sure all the material dump to the crusher will not cause the crusher block by any stone
4.) This crusher we are plan to use more than 100 years, so we make sure the tools that we use to solve the problem will no cause any damage to the crusher.
Conclusion : This problem is cause by others, and they created so much of problem and delay to the crush operation and to our company".
So crusher crew doing great job its everyone else's fault they have problems. I would bet the other departments also say the same.
@@agentx7138 Well, the blast and load teams have no excuse but the dump truck driver cannot see what is going in or coming out of his truck.
@@rnash999 yes truck dump drivers cannot see what's getting loaded the loader driver I guess is primary operative who needs to be rejecting oversized chunks. If excessive amounts from blasting poorly then pass that info back to them to hopefully influence positively the grade of material size.
Here crane operators are well paid, most likely not here, there is a hierarchy of the people yelling, loudest is the highest paid individual, if things were accomplished in a more efficient manner, you've eliminated about 5 jobs, they need jobs, even dangerous ones. This is only my opinion based on 27 years in the military and 15 more as a GS, I would see it every day, inefficiency creates long term employment lol
Fascinating on so many levels...my imagination goes wild, what has this thing had besides rock?
More rocks
Any chance you could hold the camera a little more still, and stop with all the zoom in / zoom out and changing focus? And yes... the guy yelling and that hook arrangement are really maddening... can the operator not see the hook??
Does anyone know what the siren signifies???
Tem q incluir uma grelha para matacos e um rompedor, essas paradas sai muito caro para operação.
It hurts so much to see these senseless and frustrating efforts. But I just can’t stop watching it. Is it because something is wrong with me - or am I just waiting for the moment when they come along with any smart idea?
Don’t hold your breath for a more productive outcome these Herbert’s are obs paid by the hour and not shareholders of company profits😂
I CAN ALSO PUT AN EXCAVATOR WITH A MORE SPECIAL ARM THAT CAN CLEAN THE SOIL THAT DOESN'T GO TO THE CRUSHER AND THAT CAN MAKE IT MUCH EASIER TO REMOVE THE STONES THAT LOCK AT THE ENTRANCE.
Comments read a lot easier if you don't write them all-caps.
Awesome machine. Shame about the jams/blockages. Surely in this day and age there must be a better solution than some guy dangling a rod in a hole with no idea what he’s doing. Just sayin’ 🤷♀️
i cant stand people shouting on the work site, and using a hydraulic arm will be way more efficient
What does the Siren indicate
The the truck is about to be dumped and or the crusher has been turned on.
I don't think so
0:10 That safety sign... Like one time a year the boss comes looking and told them to put this safety sign somewhere. Then they hide it behind a closed fence 😂
Crusher that never crushes!
They do get upset don’t they. I found myself shouting with them, “Down down down”…..
they are stuck in the stone age, get up to date
Why does this man keep screaming? Where is this crusher stationed?
anyone know this location?
21:31 Top left?
the guy's are taking bets on which time its going to actually do something
10 chkka dmpr driver ki salary kitni h plij reply
we used c4 and sand bags
if there where any brains in that company they might invest in a long reach excavator .
not worth the risk to much weight and you will pull the excavator into the crusher
This is Mexico. efficiency plays no part in how they work.
@@jeeperp3926 this isn’t Mexico. Where did you get that idea from?
@@deadlata9767 , sounded like it. It certainly isn’t a US plant.
@@jeeperp3926 So if it's not the US the default is Mexico..you're not doing your country any favours here...beggars belief
Where is that ?
The crane operator is blindfolded, right?
Guided only by the yelling.
what country?
What country is this in?
This is probably the top of the line of gyrating cone crushers. Can't really imagine anything handling more than this thing does.
You, guys need to implement boom of sufficient reach from mobile scrap metal crane, with rotary ''clamshel construction/demolition claw thing''. This is really not efficient..
ME AT WORK USING THE WRONG TOOL TO ACHEIVE THE LOWEST PRODUCTIVITY OF ALL TIME!
1. Der Kranführer hat nix drauf. 2. Den Schreihals im Hintergrund würde ich sofort nach Hause schicken.
جيد
Stop shouting at him. He knows what to do!
Damn! That crane operator must be on an hour pay scale. I sure would shorten the cable between the hook and cable to have better control. And sounds like to many chiefs talking and no one working.
I need to see part two where the guy yells in Chinese loud enough to dislodge the last rock.
there is always shouter and so many wavers
This is much more fun when you know the language.
who ever designed the metal hook is a big 'question mark' to me. I think and inverted question mark would work even better ;p
I thought of a dozen different ways to break up these rocks just by watching this cluster mess. Sounds like 15 people trying to tell the operator what to do. Good luck with this cluster f%%- k.
Gostaria muito de saber oque é isso
Which mine is this
India
@@henryrollins9177 😂😂 Entire India is a mine
@@Engineer9736 Entire country is a shithole...with some mines. 😀
Everything is in slow motion. Funny that I am watching.
Long boom excavator would fix that job plus a good operator. 😊
Nighttime approaches at the old crusher where the dump truckers go to get their rocks off.
You would think that in today's world.....there would be a much more effective way to do this...
down down down
There Should be a First Screen ! Put in place ! At the Tipping ! Area !
That "Hook" has got to be some big-shot's cruel joke on the crew. Even those coin operated cranes in store lobbies have more control.
Someone’s getting just a bit overexcited.
Why don't they just get an old back hoe with a spike attached to clear the jam rather than mess around with a overhead crane? Seams to be the least affective way there using lol
the skills of this crane operator is like watching Stevie Wonder hunting rabbits with an soft airgun
😮 what more do you expect when you pay peanuts than to get the whole nutty gallery 😂😂😂😂
Is there drugs involved
😭😭😭😭😭😭 Old school that hook.....
Must be paid by the hour and no supervision.
Very legy
A bloke in a harness with a crowbar would have had that fixed in a minute.
Would you trust that crane operator to lower you down? or the bloke giving him directions? 😊
@@chrismayhew3651 The bloke in the harness would be giving directions to the crane operator.
@@keithwaterhouse2845 😂😂 Imagine the crane is going down and you give instruction to stop and he keeps going for 10 more seconds 😂 And really... those rocks are over a meter in diameter weighing many hundreds of kilos, good luck with your crowbar. You don't even want to be in a position to be able to use a crowbar, as soon as stuff starts moving it will squash you with hundreds of kilos of force.