Nissan Rogue LED Interior How To Install - 2013+
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Like what you see? Find it here:
Standard: goo.gl/JFs4u7
Premium: goo.gl/vDhvAW
Compatible with all 2nd Generation Nissan Rogue
2013, 2014, 2015, 2016, 2017.
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
Direct Product Link:
Standard: goo.gl/JFs4u7
Premium: goo.gl/vDhvAW
For purchasing and production information on this LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our TH-cam Channel. It's nice to know our customers and friends care!
00:00 - Introduction
01:07 - Vanity Mirror LED Installation
03:08 - Rear Dome LED Installation
05:15 - Trunk LED Installation
07:00 - License Plate LED Installation
09:10 - Reverse Light LED Installation
12:42 - Outro
⇢ Subscribe: th-cam.com/users/Precisio...
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED - ยานยนต์และพาหนะ
![ฉันจะ "แพรี่" ให้หมด - ผู้แข็งแกร่งที่สุดในโลกอยากจะเป็นนักผจญภัยให้ได้ - ตอนที่ 04 [ซับไทย]](http://i.ytimg.com/vi/PvmuP8y9IPk/mqdefault.jpg)
Possibly the most comprehensive, informative, well done, and easy to follow TH-cam video I have seen for anything automotive.
1. This goes into my permanent browser bookmarks
2. I'm going LED's shopping for *MY* 2016 Rogue
3. Great background music too!
Thanks!!!!
One of the most detail-specific how-to videos i've ever watched on You Tube. Great Job.
Thanks so much for watching. We really appreciate the positive feedback!
@@PrecisionLED to 5390-34-0405 the world 8am ee
Amazing video love how you didn’t edit where you forgot to add switch power in reverse lights awesome vid man
Thanks for tuning in!
I played the video as I did the interior light. Perfect walk through 👍
Thank you for an awesome detailed video!!!
Great video, was surprised to find one on this specific car :)
Thanks for watching!
Nice video. I have Rogue 2013, but same concepts. Thanks and Liked.
Thanks for the video
Thank you so much!
Bomb thank you!!!!
Thanks for the video phelps a lot
Thank you very helpful
Thanks for tuning in!
Ty I needed thus
Thank you for watching!
What’s the size or how long is that ratchet extension you used to remove three screws for reverse lights? Thanks
Can you please send me the direct link for purchase the brightest kit that fits a 2018 Nissan rouge sport please.
Thank for the tutorial
Thanks for tuning in!
2017 Nissan Rogue SL Platnum glove box LED light swap video please !!!
Thanks for the suggestion. We will be on the lookout for a 2017 Nissan here in LA!
Sir, were these the premium level or the standard level LEDs that you've installed? It would be nice to see the difference between the brightness levels of both. Please advise! Thanks in advance.
Thank you for your interest. The Premium LEDs are used for all of our DIY installation videos. Also, the Premiums would be roughly 2x brighter than the Standards.
What are the specs and sizes of the bulbs? I have a 2019 Rogue SL I want to make sure it’s right fit
Do you have a guide for a sunroof version? Has two rear dome lights next to the handles.
Hi, unfortunately we do not have a specific video for the sunroof version, but if you need help with the dome light installation process feel free to reach out directly to our support team at help@precisionled.com and we should be able to make a suggestion!
For 2017 SV AWD, the cargo light is not in the same place as shown in the video. Do you have any video for that???
Unfortunately we do not have a video for your specific car, but please feel free to send a picture of the receptacle to help@precisionled.com and we can make a suggestion!
My 2016 Rogue Sv has the panoramic moonroof, so the "dome" light is actually two lights, one over each rear passenger door. Removal is not obvious, and can't find any info online, though I'm still searching... Can somebody tell be how to open these to expose/replace the bulbs?
Can't we change the front top meddle one?
do you have any shop in Tampa, FL where this can be installed.
No, we do not have a storefront, as we are strictly an E-commerce company. Also, we are not an auto shop. However, if you are concerned about performing your own installation, you can contact any auto or stereo shop and they should be able to do the installation.
Do you know if the fog lights of a x trail 16 can be changed to led?
Thank you for your interest. Yes, you can indeed change the fog lights on your '16 X-Trail to LEDs. We have listed you would use the H11 bulb type. Here is the compatible LED kit for your vehicle's fogs: www.precisionled.com/premium-h11-cree-led-headlights.html
Hello. I have a 2020 Nissan Rogue with panoramic roof and would like to change the cargo light that is located up in the ceiling rather than in the side below, as shown in the video. Do you guys know how to access to this bulb? I would appreciate your help
If you like, send us over a photo of the receptacle and we can see if we are able to make a suggestion. You can reach us at help@precisionled.com.
What is the number of the bulb for the vanity light?
What about lights by grab handles on sides above rear doors? My 2015 has push button on off and I think they are both worn out from the kids leaving them on all the time
If these are factory halogens, you may have to remove the entire fixture rather than just the lens in order to access the bulb. If you like, you are welcome to email us over photos and we might be able to make a more detailed suggestion!
Will this work for X Trail 2017? Do you ship to Australia? Thanks
If the X Trail is the Australian version as the Rogue, then yes, the LED kit is compatible with your vehicle. Yes, we do ship all over the world, including to Australia. We have an international shipping flat rate of 34.99 USD.
you could make a video of a nissan rogue 2015 SL AWD glove Box Led
We will keep an eye out for a 2015 Rogue out here in Los Angeles for an updated installation video.
I replaced the trunk build to led but I noticed mine stay on does your guys stay on ?
No, we sell only high quality Canbus LEDs to ensure your LEDs shut off when the light is turned off, and to ensure you do not experience any other issues with your bulbs.
You could also access the license plate lights when you take off the big trunk panel too
Thanks for the input!
What about the resistance issue? The LEDs are lower resistance so can trigger the “bulb out” warning. Is that not an issue here? Maybe Precision LEDs have an internal resistor?
Yes, that is correct, our LED ballast come with built-in resistors to prevent any dash errors from projecting.
How about the High beam led install? Do you a a video of that?
We do not carry the Rogue high beam bulb (H9) in our inventory. However, we do carry the proper low beam bulb, which you can find here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
Cliff Clemens The High beams are a bit tougher to get at also, they have a round cover sealing the bulb assy. My arm barely fits in there to do the drivers’ side.
What about the overhead map light. Them two lights. Can that be replace as well?
The lights you are referring to are factory LED which are soldered to a chip and board.
Did you guys use the 6000k or 8000k bulbs for this install?
Thank you for your interest. The 8000K color was used in this video.
I tried to pry out the 2019 Nissan Rogue reverse light and it won’t come out took out all three screws and it won’t budge I don’t want to break anything on it. Any suggestions?
Eric Goldenberg be careful not to scratch it when you pry. Go in from the side of the trunk light. Make sure to pull it up to make room for your pry tool, use a microfibre cloth to wrap tool if needed for paint protect. When your pry bar is in, turn it and wiggle it in deep and eventually it’ll pop. It’s pretty tight in there so use that cloth so you’re not scared of damaging anything
Thanks for the above comment, sounds like it would work! Also if you have any install issues please feel free to reach out at help@precisionled.com!
Is there a way to change the map light LEDs to a different color?
No, the map lights are stock LED, which you cannot replace as they are soldiered to a chip and board.
PrecisionLED - I hate the size they made for that map light. It’s not bright enough
Hi what type of bulb is reverse light ? T20 ?
The reverse light would use the T10 10SMD bulb type, which you can find here: www.precisionled.com/premium-t10-canbus-10smd-5730-led.html
Where these the 6k or the 8k lights installed.
Would this work for a 2017 Rogue Sport?
Yes! The installation process would be very similar but you would install this kit:
www.precisionled.com/nissan-rogue-led-interior-package-2016-present.html
Can you tell me where I can find the bulbs and which specifications (size)
Thank you for your interest. You can find a direct product link to the package in the description of the video.
which color do you recommend? 6000k or 8000k
Bulb color temperature is ultimately personal preference. The 6000K projects a pure white, and the 8000K projects more of a cool white color. The 6000K is slightly brighter.
Hi I was wondering the bulb number for the vanity light
Hi! The vanity light uses a 29mm festoon type bulb, which you can find here:
www.precisionled.com/festoon-29x5mm-2-smd-led.html
Is the price of this product shown in canadian dollars?
Please check out our website precisionled.com for all pricing details! Thanks!
How about LED for the brake lights?
We actually do not recommend brake light upgrade to LEDs as they may hyper flash when ignited.
What is the name of the led light bulb for the interior
The interior lights use a 29mm festoon bulb, which you can find here: www.precisionled.com/premium-festoon-29mm-canbus-3smd-5730-led.html
Do u have the same kid for a 2018 roug
This kit should work for your 2018: www.precisionled.com/nissan-rogue-premium-led-interior-package-2016-present.html
Is that the crystal or cool white
The crystal white color was used in the video.
Anyone know how to do the glove box
We have listed the Nissan Rogue 2016 does not have a glovebox light. However, if this is not the case for you, feel free to send a picture to help@precisionled.com and we can recommend a bulb and install procedure.
Do u have a 2016 rogue how to replace the manufacturer radio with another time that fits w/o promoting a brand name,please. Thank so much
Roger Rabbit I have installed a after market double din in my 16 Nissan Rogue before. It’s not too bad to change out the stock radio
👍
Bro, Little Problem, How replace map lights...?
The map lights are factory LED so we do not show an upgrade in this video. Factory LEDs are soldered to a chip and board which makes them much more complicated to replace.
@@PrecisionLED can them replace by removing soilder...?
where is the center interior one?!
Carlos Magno Tubertine If you have a panoramic sunroof there isn't one
Would this work for the Nissan Rogue 2019 ?
This kit should work for your 2019: www.precisionled.com/nissan-rogue-premium-led-interior-package-2016-present.html
I don’t see how this the most detailed-specific it lacks some details like sunroofs. No dome lights in them just two lights one over each rear doors.
Why can't Nissan install when they make them,, they so dam cheap
Because they already have millions of the incandescent
🤷♂️
Why would anyone want to put a bright led in a vanity mirror? To blind themselves and not able to see anything in mirror
Are you blinded by bright vanity lights in your bathroom? The point is to brightly illuminate your face and pop zits
You can always choose to install the standard LEDs, which are not as bright as the premium.
The interior lighting on this model is pathetic ,especially the trunk lamp. I have installed led globe's and the difference is fantastic,recommended.
Agreed, it makes a huge difference!