Fiber Optic Interior Ambient Lighting Install - RedlineMods

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 164

  • @bailysawyer804
    @bailysawyer804 2 ปีที่แล้ว +43

    Spent the whole time waiting to see how to get the wire back into the car. Glad to see I wasn’t the only one

  • @JimmyPersad
    @JimmyPersad 2 ปีที่แล้ว +499

    You forgot to show the most important part, how to route the cable into the car… 🤦🏽‍♂️

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +39

      I mentioned it but recording it is too difficult. Mainly comes off the side door grommet into the surrounding panels. Passenger routed under the glove box. Driver side routes under the steering wheel. Zip ties and that's it. Camera angle is too tight to capture all that.

    • @dilawarmubashir6736
      @dilawarmubashir6736 2 ปีที่แล้ว +12

      @@BoostedWhipz Did you push the wires through the rubber grommet between the door and the car?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +12

      Yes. Pain in the rear but yes.

    • @BALL_BUZZ
      @BALL_BUZZ 2 ปีที่แล้ว +13

      Exactly. I think the version I seen where they open the door panel and connect the wire to the door controls for power is a lot more professional looking.

    • @ice2002
      @ice2002 2 ปีที่แล้ว +7

      @@BALL_BUZZ I agree but I am trying to figure out the plug & play part in terms of where do they get the piece!

  • @opiatesmile
    @opiatesmile 2 ปีที่แล้ว +27

    Feel like you skipped over the hardest part of the installation. How did you get the wire from the door back into the car?

    • @brandonstigger816
      @brandonstigger816 2 ปีที่แล้ว

      Same way ur window electronics come in...

  • @simplycy919
    @simplycy919 ปีที่แล้ว +5

    Did you just show the two doors as an example and the “how to”… but 26 feet would be enough to cover a ton of the interior, no? How much do you end up cutting off/losing? Just received this today, and your video is invaluable. Thank you 🙏🏼

  • @bears893
    @bears893 2 ปีที่แล้ว +9

    Some of us would assume this would be a our job tops. But some door jams have custom harnesses instead of a simple rubber grommet of which will require drilling. In my opinion not worth it if you have a newer vehicle. But awesome video in regards to the product and what it looks like

  • @coles_infiniti
    @coles_infiniti 2 ปีที่แล้ว +17

    I just bought this kit and I was a bit confused at first but I appreciate the good details you gave bro

  • @travissmith601
    @travissmith601 ปีที่แล้ว +1

    thought that theres a actual fiber optic cable that you suppose to feed through that strip . thats just routing strip to secure the fiber optic cable man. Just a heads up. it will look alot cleaner and brighter with the fiber optic use which you can buy seperate

  • @rustybarclay3581
    @rustybarclay3581 9 หลายเดือนก่อน +2

    How did you get the optical cable inside the plastic holder?? Been at this for hours and there's no way

  • @SF-fb6lv
    @SF-fb6lv ปีที่แล้ว +4

    How exactly did you run the diode electricals back to wherever they get their power? Where DO they get their power? From the cigarette lighter?

    • @noahguerra1424
      @noahguerra1424 หลายเดือนก่อน

      The car charger ports my boy

  • @berkancalskan1972
    @berkancalskan1972 5 วันที่ผ่านมา

    Super

  • @realiphar7891
    @realiphar7891 หลายเดือนก่อน

    I was wondering how you did pass the wire through from the door panel to the cigarette socket, I am trying to do it myself and I don’t know how I can hide the wire from the cigarette socket to the door panel 🤦🏾‍♂️

  • @K03sport
    @K03sport 2 ปีที่แล้ว +7

    How do you cover/block parts of the plastic strip in places you don't want to see the light, like on the edge of the door panel after the 90* bend upwards?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +2

      Put black electrical tape

    • @K03sport
      @K03sport 2 ปีที่แล้ว +2

      @@BoostedWhipz ...I figured it could be something as simple as black tape, but I thought there could be a better way, especially if you have a gray or beige interior. then I guess depending on what color your door panel is will depend on the color tape you need to track down...or just be content with the part of the strip that sticks out....

    • @Ulven3829
      @Ulven3829 2 ปีที่แล้ว

      Drill a hole, and put the end through it

  • @BSDLLC
    @BSDLLC 5 หลายเดือนก่อน +5

    These are terrible. Spend the money on the symphony RGB. I wasted so much time installing these only to find out they get way dimmer as they get farther from the light source.

  • @MaroonRose3216
    @MaroonRose3216 7 หลายเดือนก่อน

    Were all your power cords (projectors) the same length? Should the longer ones go in front or back?

  • @3rdzodiac
    @3rdzodiac ปีที่แล้ว

    Touching on the Ebay and Amazon comment. Ebay has 5m, 6m, & 8m. 5m is 4 in 1. 6m is 5 in 1 and 8m is 6 in 1.

  • @muhammadrao9060
    @muhammadrao9060 หลายเดือนก่อน

    Hi
    Can you provide name of 6 connectors of fibre optic as well as where I can purchase. ???

  • @cashempiregh
    @cashempiregh ปีที่แล้ว

    Bro thanks for the information

  • @adrian.lifts_06
    @adrian.lifts_06 ปีที่แล้ว

    thx this, helped me a lot

  • @kennysanchez4427
    @kennysanchez4427 2 ปีที่แล้ว +2

    Can you do a video installing ambient lighting on ur G70s? I was hoping to do it to mine but wasn't sure the best way to go about it.

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      Same here lol... panels are tight af.

  • @RedLineMods1
    @RedLineMods1 2 ปีที่แล้ว +5

    That looks fire!! 😍🔥🔥

    • @bitcoochie4093
      @bitcoochie4093 2 ปีที่แล้ว +1

      Looks cheap like the rest of car

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +7

      Your comment is cheap 😃

  • @MrMamalette87
    @MrMamalette87 6 หลายเดือนก่อน

    Can you cut the fiber optic ? Is that how you were able to run it through the whole car ?

  • @GabyvsAlice
    @GabyvsAlice 2 ปีที่แล้ว +2

    U have to use remote control every time or they start automatically with turn on the engine?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +5

      If you leave the main power set to ON it will turn and off with engine since its an accessory.

    • @marlonacostaordonez8814
      @marlonacostaordonez8814 2 ปีที่แล้ว

      @@BoostedWhipz thanks

  • @mijaylasantiago4601
    @mijaylasantiago4601 ปีที่แล้ว +1

    by any chance u know the app called to change the color of the lights ?

    • @OMAARVIP
      @OMAARVIP 7 หลายเดือนก่อน

      Its called lotus lantern

  • @bri7929
    @bri7929 ปีที่แล้ว

    Do you drive with the window down and the rest of it just hanging out the window

  • @anastasiaserwaa4669
    @anastasiaserwaa4669 หลายเดือนก่อน

    Please how do I choose one color? I just don't like those disco on and off thing

    • @BoostedWhipz
      @BoostedWhipz  หลายเดือนก่อน

      Via the app or actual remote.

  • @dagoddess9978
    @dagoddess9978 2 ปีที่แล้ว

    So first off for it to work you had to plug it in a usb ?how is the cord running ?

  • @rayzorsimo
    @rayzorsimo ปีที่แล้ว

    nice video.nice guy.nice car.nice everything. thank you for this great video

  • @Vids703
    @Vids703 ปีที่แล้ว

    My kit came with a wire and the one that you installed do I have to use both put the wire inside of the one that goes into the panels like you did which is better or wsid

  • @theysellsoulscheaphere8501
    @theysellsoulscheaphere8501 2 ปีที่แล้ว +2

    Do these work for trucks? Specifically 2011 models?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      It's a universal kit. Works on everything. What you need to determine is if the included fiber is long enough or if you need more.

  • @Chief_Warthog
    @Chief_Warthog 2 ปีที่แล้ว +1

    Can you see the bright spots in IRL or is that just the camera picking it up?

  • @Craignevis19
    @Craignevis19 2 ปีที่แล้ว +1

    It is possible to link and control multiple devices at the same time within the Lotus Lantern app. This is a question I had when I bought two separate lighting devices.

    • @Craignevis19
      @Craignevis19 2 ปีที่แล้ว +1

      I couldn’t find the answer to this question anywhere. I was happy to find out this was possible when my devices arrived.

  • @Bigship10tion
    @Bigship10tion ปีที่แล้ว

    How did you hide the cables amigo?

  • @alexisduarte9626
    @alexisduarte9626 3 หลายเดือนก่อน

    What's the name of the app? You did it say it. 😅

  • @pimpkinn231
    @pimpkinn231 ปีที่แล้ว

    could i buy separate projectors if i need more than 6 projectors

  • @LoveJvsmnn
    @LoveJvsmnn 5 หลายเดือนก่อน +1

    I need to know where is the wire into the car smh!!! I like the video but it’s not helping me with the hard part .

    • @Gman7007
      @Gman7007 หลายเดือนก่อน

      Absolutely correct!,,

  • @ccb6013
    @ccb6013 ปีที่แล้ว

    Is there a way for us to look at our car door and determine if it will require drilling?

  • @OhioBallKnower
    @OhioBallKnower 2 ปีที่แล้ว

    Could I wire tap the power cable into some intsead of using cigarette lighter

  • @andersontaylor2933
    @andersontaylor2933 ปีที่แล้ว

    Two words
    Engine firewall, for those less mechanically inclined

  • @Vlapstone
    @Vlapstone ปีที่แล้ว

    how did you pass the wire from the door to the inside part of the car? This is what I wanted to see.... :(

    • @MaroonRose3216
      @MaroonRose3216 7 หลายเดือนก่อน

      In my accord, I ran mine under the door floor panel and under the seat. I was most comfortable with this so the cables are nowhere near the pedal and brake.

  • @sambathvenkatesan618
    @sambathvenkatesan618 2 ปีที่แล้ว +1

    Doesn't show where the diode wire is connected to the power source?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      I don't show the routing but yes connected to power.

  • @RonakJani
    @RonakJani 7 หลายเดือนก่อน

    When I connect my plastic tubes to the main light module, there is no light visible through the tubes even though the main light module things has lights in them. Can you please help me with that ?

    • @BoostedWhipz
      @BoostedWhipz  7 หลายเดือนก่อน

      Gotta contact the vendor you bought from. I wouldn't know.

  • @papichulo8442
    @papichulo8442 2 ปีที่แล้ว

    Does this actually stay in the car or does it fall out of the grooves in the door

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +1

      Stays on mine.

    • @papichulo8442
      @papichulo8442 2 ปีที่แล้ว

      @@BoostedWhipzcool, thanks for the reply.

  • @raazoorwarrior3410
    @raazoorwarrior3410 ปีที่แล้ว

    Where can i order the exact peace,please answer. Love from Germany. Thanks for nice video.

  • @cinn0777
    @cinn0777 2 ปีที่แล้ว +1

    is there any way to do it without prying the inside ??

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +2

      Unfortunately no unless you want the wires showing and hanging

    • @cinn0777
      @cinn0777 2 ปีที่แล้ว

      @@BoostedWhipz aww thanks tho!

  • @JusJ15
    @JusJ15 2 ปีที่แล้ว +1

    whats the app called? got it installed on my car but lost the manual and trying to figure out the app name.

    • @vipboss82
      @vipboss82 2 ปีที่แล้ว +1

      Lotus Lantern X

  • @allanlucibello8834
    @allanlucibello8834 2 ปีที่แล้ว

    Would you say that this kit is one of the best on the marjet?

  • @emperorscotty
    @emperorscotty ปีที่แล้ว +1

    they always skip the step i dotn know how to do so annoying.

  • @alyssapanzer5142
    @alyssapanzer5142 2 ปีที่แล้ว +1

    Could you link the exact product that you use? I saw the product information in the description but it took me to the website and not the actual product

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      Just updated description.

    • @alyssapanzer5142
      @alyssapanzer5142 2 ปีที่แล้ว

      @@BoostedWhipz Thank you! Do you know any cheaper alternatives?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      Nope

  • @brayy478
    @brayy478 ปีที่แล้ว

    What is the app called?

  • @PodcastAnything
    @PodcastAnything 2 ปีที่แล้ว

    My lights won’t go through the full strip on the door. Did yours do this too?

    • @vipboss82
      @vipboss82 2 ปีที่แล้ว

      Same problem, they are not that bright enough if the cable is over 1 meter long

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      Mine worked fine as seen on the video towards the end. Which kit did you buy?

  • @Gman7007
    @Gman7007 หลายเดือนก่อน

    You didn’t even show the hardest part I was waiting to see!!!! Pointless video!

  • @Skull0023
    @Skull0023 2 ปีที่แล้ว +1

    Hi can i cut and connect it directly in power window switch?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +1

      You could if you know how to.

    • @Skull0023
      @Skull0023 2 ปีที่แล้ว

      @@BoostedWhipz thank you sir

    • @K03sport
      @K03sport 2 ปีที่แล้ว +2

      ... why not splice the main harness (12v cig plug) into the lights fuse slot with an add-a-fuse...it will help keep wires out of sight and it will turn on with your lights...yes, some cutting and splicing is necessary, but in the end it will look cleaner.

  • @JC-ib7hs
    @JC-ib7hs ปีที่แล้ว

    Please put the link of the product i cant find that productt😢

    • @BoostedWhipz
      @BoostedWhipz  ปีที่แล้ว

      In the description details

  • @melodypiper8854
    @melodypiper8854 2 ปีที่แล้ว

    How much feet is needed for a dashboard?.

  • @jaqualiawatts2204
    @jaqualiawatts2204 2 ปีที่แล้ว

    Hi
    Where did you put he attached cord to hide it

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      Behind the door panel and then all routed cables below glove compartment zip tied.

  • @marcianoalvarado8351
    @marcianoalvarado8351 ปีที่แล้ว

    Can you come do this one

  • @7offee
    @7offee 2 ปีที่แล้ว

    What about the Dashboard?

  • @quillanthrasher6846
    @quillanthrasher6846 2 ปีที่แล้ว +5

    Great video man. Simple and to the point I like it. Good job

  • @JRod.Cuztom
    @JRod.Cuztom 2 ปีที่แล้ว

    Looks easy

  • @jakeherrera9638
    @jakeherrera9638 2 ปีที่แล้ว +1

    Where do you hide the cords?

    • @bk6182
      @bk6182 2 ปีที่แล้ว

      More than likely behind the door panel, through thr rubber boot, either under the carpet on the floorboard or tucked under the dash routed to the 12v.

  • @jaqualiawatts2204
    @jaqualiawatts2204 2 ปีที่แล้ว +1

    Could you please tell me where did you put the connector with the led light at?

  • @ZoroX1
    @ZoroX1 2 ปีที่แล้ว

    is this el wire

  • @hovhannisyan_046
    @hovhannisyan_046 ปีที่แล้ว

    what is app name for phone

    • @BoostedWhipz
      @BoostedWhipz  ปีที่แล้ว

      Reach out to Redline Mods on IG.

  • @PerformanceArt19
    @PerformanceArt19 ปีที่แล้ว

    What's see dawn?

  • @ChikaCheeks
    @ChikaCheeks 2 ปีที่แล้ว +1

    Is here any video that actually shows you how to completely wire this ?

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว

      Unfortunately no because it gets very messy from the video angles.

  • @uhuugyvenk9441
    @uhuugyvenk9441 ปีที่แล้ว

    Get it. Now.

  • @hari8811
    @hari8811 2 ปีที่แล้ว +1

    Can you tell me how to do the same with cars that has leather interior, it’s easy to insert the fiber optics through the plastic frame gaps on the door, but with leather it’s difficult to do it and it keeps coming off

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +1

      Each car is different gotta find the best method.

  • @childerenofgod
    @childerenofgod 2 ปีที่แล้ว

    What color is that wrap?

  • @angelicaortiz6523
    @angelicaortiz6523 ปีที่แล้ว +1

    i can’t get the fiber tubes through the other tubes

  • @Quez5k
    @Quez5k 2 ปีที่แล้ว

    Did you install any on the g70

    • @BoostedWhipz
      @BoostedWhipz  2 ปีที่แล้ว +1

      I wanted to but panels and location are a bit of a challenge. I do have underglow.

    • @Quez5k
      @Quez5k 2 ปีที่แล้ว +1

      @@BoostedWhipz lol that’s the only reason I haven’t got the car yet. I was thinking about the stinger, but I love the g70 a bit more. I know I can install some under the footwell but I want them in my door panels as well.

    • @Craignevis19
      @Craignevis19 2 ปีที่แล้ว +3

      @@Quez5k Are you telling us you’re basing your car selection on whether you can put lights in the door panel? You silly goose!

  • @tallgirlswagg
    @tallgirlswagg 5 หลายเดือนก่อน

    I bought some cable just like this. It is way too thick. Looks horrible. (Just my opinion, not towards your install)

  • @chrisviela3601
    @chrisviela3601 2 ปีที่แล้ว

    I thought you were putting light in the first car

  • @masonwilliams1810
    @masonwilliams1810 2 ปีที่แล้ว

    Sedahhhhn

  • @joemtnclimber793
    @joemtnclimber793 ปีที่แล้ว

    Go ahead and

  • @mathewhunt81
    @mathewhunt81 ปีที่แล้ว

    buy on amazon same thing for $35. buy on his website for $135???????????

    • @randyn7250
      @randyn7250 ปีที่แล้ว

      Not the same one I believe

  • @MrMcMuffinJr1999
    @MrMcMuffinJr1999 2 ปีที่แล้ว +1

    😂😂😂😂😂😂😂 “made out if fiber optic” that’s not a material 😂😂😂😂😂😂😂

  • @Official__RILO
    @Official__RILO ปีที่แล้ว

    7:47 bro was to masculine to say pink

    • @BoostedWhipz
      @BoostedWhipz  ปีที่แล้ว +1

      Lol... I rock pink and purple on my car... but that was Magenta 🤣

  • @davidwillett53
    @davidwillett53 ปีที่แล้ว

    NOT FOR SPORTS CAR. Sturdy, safe but not good for sports car.

  • @kevinhall3747
    @kevinhall3747 หลายเดือนก่อน

    Please stop saying ‘go ahead and’

    • @BoostedWhipz
      @BoostedWhipz  หลายเดือนก่อน

      It's a bad habit 🤷🏻‍♂️

  • @nikohot1
    @nikohot1 6 หลายเดือนก่อน

    This video is literally pointless, he shows you nothing just a bunch of senseless talking

  • @EMdee1986again
    @EMdee1986again ปีที่แล้ว

    Poor demonstration

  • @sunnycheema2017
    @sunnycheema2017 8 หลายเดือนก่อน

    Most useless video kid can do that. But no wiring

  • @ek91project
    @ek91project ปีที่แล้ว

    Gay asf. Where can i buy?

    • @BoostedWhipz
      @BoostedWhipz  ปีที่แล้ว

      Details in description lol