Chips-n-Tips -Redcat DAYTONS & TRUE 13 RC Lowrider Wheels
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2023
- Chippin’ and dippin’ on them D’s…
Huge THANKS @chevysixuno8988… Check his channel for SUPER CLEAN Custom RCs!
*BE PATIENT TAKING THE SPOKES OUT… CAREFUL NOT TO WARP OR TWIST…
SOME JUST DO NOT WANT TO COME OUT… THESE WILL LIKELY BREAK IF YOU PROCEED!*
FEATURED PRODUCTS: www.redcatracing.com/?ref=cw1...
-RC Plate Shop - Dayton Wheel Chips -@ rcplateshop
-Officially Licensed Dayton 13” Radial Reverse Lace Wheels -@ Redcat Racing
-Jevries True 13 Lowrider Wheels w/ 12mm x 7mm hexes -@ jevries
-12mm x 5mm wheel hexes - 1:10 scale upgrade parts -@ amazon
-12mm x 4mm hex - VXL Summit upgrade parts -@ amazon
Music: gone crazy -Jason Szklarek & in chill out hip hop -Valentina Gribanova
RedlineStudio² -2023 -respect & gratitude
Redcat Racing Sixtyfour -79 Monte Carlo -Fiftynine -13” -Dayton -Two Tone Spokes - ยานยนต์และพาหนะ
Nice video. Good work. Keep ‘em coming👍
Much appreciated… will do! Thanks for checking it out 😎
Great video with some good info 😎great job 👍🏼
Thank you bro 😎 @soy1de3aztlan I really appreciate your time and awesome comments 👍👊
@@redlinestudio2 you wellcome homie 👍🏼😎
AWESOME video.....
Thanks David M… glad you enjoyed it 😎
Aww thanks man!! Appreciate it..
Thank you bro!! Your comments and videos gave me a ton of ideas, I really appreciate your time and support!
@@redlinestudio2 any time bro...i build rc lowriders way before deadcrap was around...anytime i can help u...let me know.
@CHEVY SIXUNO the RC Lowriders you build are so badass… and those Z71 Trucks!! RC LOWCOS! Thanks for everything homie 😎👊
@@redlinestudio2 thanks bro...i got ur back anytime.
Right On. Thank You for this Video. Appreciate all the tips and info!
😎👍🏻
You’re welcome Carlosinator 😎 I really appreciate all your support brother! 👍👊
@@redlinestudio2 Right On Brother. Subscribed!
😎👍🏻
😎👊
Man I gotta get some chips for my wheels now. They look great💯💪👍
They really add that finishing touch… my other wheels look a little sad now ha ha! Thanks brother 😎👊
@@redlinestudio2 your welcome bro
Sweet video...rc drift hexs are good too... good content...
Thanks @CHEVY SIXUNO… I’ll check those out 😎 I did… and they’re perfect if you have clearance issues… no mods needed either.
For the zenith type wheel what size wheel chips you get?
the 4.5mm fits the Zenith knock off…
Do the spokes pop off of the jevries rims also?
Jevries are a one piece rim… they don’t come apart. Thanks for the question @Jeremy Gee 😎👍
Where can I buy front stiff shocks for my redcat 64 already made???
Check out Skunks Customs… Skunks Hobbies(online)
He’s got tons of Pre-built shock options!
@@redlinestudio2 They are all sold out
Sure enough… I can’t find anything in stock. Kandy n Chrome has the modified coil over shock in stock… but it is completely rigid(no spring re-coil) Jevries builds some very simple custom shocks in his “Lay It Low” video too… simple but still require mods.
Where do you find the wheel chips
rcplateshop.com …they have a few options available and some other cool stuff. Thanks for watching and… say hello to my little friend!
How do i stop my knock offs from coming off while driving
Elmers Glue does the trick. A dab will hold them on but they can still be taken off later! Good luck @Redrum662
@@redlinestudio2 that sounds great. Its crazy how tight i put the ko on the rear drivers side n it still unscrews off.
What was the size of the sticker is it 6mm?
The 4.5mm chips fit these knock offs, they came with Jevries cross laced wheels.The strait laced wheels come with a knock off that uses the larger 5.5mm or 6mm chip.
run the Summit drive pin, those lowriders are not even drivin hard anyhow, you wont even notice the slop... 1mm/.5mm spacers are easier tbh.
Ran the little pins for awhile… they were okay. thanks for watching👍
Had no problem with the gold one but the chrome ones were a pain I broke a spoke on each rim and only one rim didn’t give and I completely destroyed it had me so mad SMFH it didn’t even budge I mean not even a little
That sucks… sorry it went down that way. IMPORTANT INFO for ALL TO KNOW… thanks for sharing. I had more trouble with the gold spokes.. chrome was easy for me. Did you buy both sets at the same time?
@@redlinestudio2 yup and I even scribed around the rim and it did nothing for this one rim I guess the really glued the one or the chrome bonded it because it didn’t budge
@Boe’neal I bought my sets from two different “batches”. Chrome from the very first production run… I wonder if the plating is thicker on the newer batch… or if it just changes from batch to batch making it impossible to take some apart?
Check out @Dsnvogues OKCLOWS video on painting the spokes gold. Also try a dab of E6000 glue on those spokes…hope they are salvageable. Thanks man