This is the best explanation of any video I have ever encountered, really appreciate you stopping at some points to review what you covered on the installation SERIOUSLY 💯💯💯💯💯💯
It does help to take the head liner out of the car with someone but unscrewing everything can literally be done by one person if you have someone else helping you make the holes for the lights again it’ll just help make things go faster
Thanks a lot tons of hard work go into these videos happy to know someone likes it ! We appreciate the feedback!!! Please like the video and subscribe for future content . We post tons of pics and videos on our social media accounts as well !!!
Solid video! Straight to the point; nice editing too. Mad props for not filling it with ads!!! I have a 2018 Challenger T/A 392... Is that same kit (800 piece) compatible for my ride? How much $$$? If not, then what would you recommend?
i have a 2012 Chrysler 300c but nobody has any well explained videos and yours is the only good one that’s helped me take my front part of headliner and visor but I’m stuck at the rear… my bf thinks we have to unbolt the bolt that’s in my front bottom seat but idk… ANY HELP ASAP??😭
Add us on instagram and send us photos real quick that’ll be the fastest way for me to see and respond . We have a few customers that have used this video for the 300 c already
Hey do u know about how much space u have between the headliner and roof so Ik how small I have to get the box so it will fit up there I have a charger as well so it’ll be the same space
can you reconnect my liner properly? my passenger side pillar wont close so it looks ugly and i didnt plug in the lights to the back passenger lights...im in laurel Maryland
We traveled to over 50 different customers out of state for mobile service . We charge a flat rate half down covers parts and booking . We complete the job in 2 days and come back home . If it’s close enough we drive if it’s far we fly . I’ve done installs as far as Chicago and Miami from Oklahoma !
10 amp fuse the vehicle was here a week ago for us to mount and balance new tires on it, and all of the star lights are in working condition with no problems or issues two years later
What's a good size fuse to run between the 16 gauge extension wire and the wire from the stripped power brick. Also what's a good size fuse on the fuse tapper? I'ma do it to the navigation in the trunk so would adding a 15amp fuse be good on top of that? Or is that too small
Front seats belts need to dropped down and cover removed. Bolt will be right under it for removal . I think we spoke over the phone ! Please subscribe and share
So, I have a question…..I had someone install these for me in my 2014 (same process applies, interiors are almost identical), but my installer took the pillar trim pieces completely off….including the safety clips. So how the heck do I get them back on?
Battery has been on and never removed in any install I have ever done in any vehicle year make or model . I’ve done everything from a Honda civic to a g wagon . Never had an issue .
I have a very interesting and technical question / solution. would it be possibly feasible to trim all the fiber optic hairs with a pair of hair trimmers for speed and consistency?
@@onpointcustomauto1289 the part where you have to Taco the headliner, it’s gruesome but yeah I folded mine pretty bad but it actually didn’t do anything to it no creases etc.
![ว้าว!ลุงบีมแบกทองมารับขวัญหลานกันยกบ้าน [cc] แดนแพทตี้ SS2 | EP.49 |](http://i.ytimg.com/vi/Osihq1OAs-4/mqdefault.jpg)
Probably the best explanation I’ve seen on TH-cam so far appreciate it
This is the best explanation of any video I have ever encountered, really appreciate you stopping at some points to review what you covered on the installation SERIOUSLY 💯💯💯💯💯💯
Ok I’m I 👍🏻 get it to go lol oh loooooii I I
Thank you alot for the sun visor tip I thought I was gonna have to remove the hole headliner saved me alot of time much appreciated
I am currently getting this done to my Challenger! I'm super excited and can't wait to rate and show it off! 🔥
Finally someone that doesn't use a damn inverter I'm doing mines the exact same way
Best video I’ve seen on this topic
This shit looks easy and hard at the same time
How do you run this with a sunroof?
Finished mine yesterday literally step by step alongside with you
I haven't watch the video just yet. Was it difficult for you? Did you need an extra hand with thr installation?
It does help to take the head liner out of the car with someone but unscrewing everything can literally be done by one person if you have someone else helping you make the holes for the lights again it’ll just help make things go faster
❤❤❤ that’s nice great job!!
Great job.
You did awesome video 🔥🔥🔥🔥
Thanks a lot tons of hard work go into these videos happy to know someone likes it ! We appreciate the feedback!!! Please like the video and subscribe for future content . We post tons of pics and videos on our social media accounts as well !!!
Solid video! Straight to the point; nice editing too. Mad props for not filling it with ads!!! I have a 2018 Challenger T/A 392... Is that same kit (800 piece) compatible for my ride? How much $$$? If not, then what would you recommend?
happy it helped man please hit the sub button for future videos well be staring a monthly tv show in the next 2 months be o the look out
How do you get the headliner out of the car with the sunroof?
i have a 2012 Chrysler 300c but nobody has any well explained videos and yours is the only good one that’s helped me take my front part of headliner and visor but I’m stuck at the rear… my bf thinks we have to unbolt the bolt that’s in my front bottom seat but idk… ANY HELP ASAP??😭
Add us on instagram and send us photos real quick that’ll be the fastest way for me to see and respond . We have a few customers that have used this video for the 300 c already
Hey do u know about how much space u have between the headliner and roof so Ik how small I have to get the box so it will fit up there I have a charger as well so it’ll be the same space
Were can you find the extension wire for possitive connection
I would have used a trim tool instead of a flathead because your scratched the shit out of the sun visor cover.
can you reconnect my liner properly? my passenger side pillar wont close so it looks ugly and i didnt plug in the lights to the back passenger lights...im in laurel Maryland
How can they do nationwide service if they are based in a. Certain area new to car mods 😩
We traveled to over 50 different customers out of state for mobile service . We charge a flat rate half down covers parts and booking . We complete the job in 2 days and come back home . If it’s close enough we drive if it’s far we fly .
I’ve done installs as far as Chicago and Miami from Oklahoma !
Super informative thank you! Just need help with doing a roof with a sunroof.
Bout the kit but I was wondering what changes since I have a sunroof
Thanks fam !!
happy it helped man please hit the sub button for future videos well be staring a monthly tv show in the next 2 months be o the look out
what amperage was the fuse that you used since you tied them together? How is the car now ?
10 amp fuse the vehicle was here a week ago for us to mount and balance new tires on it, and all of the star lights are in working condition with no problems or issues two years later
What's a good size fuse to run between the 16 gauge extension wire and the wire from the stripped power brick. Also what's a good size fuse on the fuse tapper? I'ma do it to the navigation in the trunk so would adding a 15amp fuse be good on top of that? Or is that too small
So did you cut the wire thats suppose to gonin the cigerette lighter then buy another wire that connects to a fuse ? Can u show how you did this
Where do you get the fuse is a 2018 challenger sxt battery in the front or back of the car
Came out great!
how did u remove rear? Did u have to mess with the front seatbelts?
Front seats belts need to dropped down and cover removed. Bolt will be right under it for removal . I think we spoke over the phone ! Please subscribe and share
THE SKY DOES LOOK PERFECT :)
Does it leave any damage to the roofliner
So, I have a question…..I had someone install these for me in my 2014 (same process applies, interiors are almost identical), but my installer took the pillar trim pieces completely off….including the safety clips. So how the heck do I get them back on?
My front pillars have a line running through them to under the headliner ? Can anyone help?
Would it be any different with a sunroof ?
What fuse did you use?
Is it different if I have a sunroof??
would it be hard with a sunroof too?
Do you have a contact in the Tampa, FL area for an installation job?
Were do u get a convertor
How do you remove the lights???
Remove which lights?
Should the battery be disconnected first?
Battery has been on and never removed in any install I have ever done in any vehicle year make or model . I’ve done everything from a Honda civic to a g wagon . Never had an issue .
Do you have a link for the kit you used?
You didnt show how you put the fiber into the battery
Job time to remove and put back ?
Work for a 2014 Chrysler 300
I have a very interesting and technical question / solution. would it be possibly feasible to trim all the fiber optic hairs with a pair of hair trimmers for speed and consistency?
Would this removal process work similar on a 2016 Chrysler 300?
Yes it will I have had multiple ppl contact abt this and also successful as well
Which kit did you used ?
We use our own kits shoot us a dm on Instagram Facebook or email and we can get you checked out Onpointcustomauto @gmail.com
What gauge wire did you use for the extension?
16
How much?
I tried calling to get a kit installed and it says the number was disconnected
773-920-0538 make sure your calling the right number please. It’s definitely connected
What's up
What’s up man hope you enjoy the video
@@onpointcustomauto1289 I did the lights were amazing speaking of lights did you get the message on mine just curious
How much are you selling your kits for?
shoot us an email we have multiple options
Skipped the part I came for
What part are you specifically looking for
@@onpointcustomauto1289 the part where you have to Taco the headliner, it’s gruesome but yeah I folded mine pretty bad but it actually didn’t do anything to it no creases etc.