Sweet. I noticed the trimming of the front in the video but couldn’t tell how much exactly. Nicely done. I have the exact machine, 22 HL, looking at doing the same suspension/ tire size build. Keep up the great videos.
Blake and Amber thank y’all for everything. Y’all definitely take pride in what y’all do and I’m glad we were there and involved every step of the way. That was the best two days. We also appreciate all the help from Mr Mark and Frankie. Thank you !
Y’all are so amazing and we are so thankful! It means so much and I can’t wait for the future and our friendship to only grow! It was the best time for sure!
Awesome videos. One of my favorite TH-cam channels. I wish you guys would slow it down and tell us what a arms, ball joints and so forth that you have had great success using. Keep ‘em coming!!!
Thank you so much!! It really means the world to us!! We definitely talked about giving more details during the video, we get so excited we never stop lol!! We definitely will have a mother build coming in the future and I’ll do better at explaining!!!
Great Video. What's the width on those 44's wides/skinnys? im looking at building the same setup? Any reason you didn't go with 8" portals. i see lots of ppl buying the 6" over the 8" and im starting to worry being i just ordered 8". Thanks
The 8” highlifter portals were not out yet and we run highlifter portals. The 44 BKT only come in an 11.2 wide and we rather the wide. There are videos previously of them in the mud.
@@BOTTOMLESSTRAILSTV I went to order the kit. They asked if I wanted the ones with it. Or 18in or 19in tie rods so I'm guess the ones that come stock will work nothing special order right
Make sure you get the smaller inner bolts and shorter rod, three orders and they sent the big ones with all them and had to exchange them!! Get with Alan booty tell him you want exactly what we have!!
I know the rears we get them to send us at 32” because the 34’s that come with the kit are a hair long, not sure on the fronts but it’s the kit on sandcrafts page that comes with all the nice hardware and all, top notch in my opinion
The speedo doesn’t read correct, but if I had to guess probably 40-50 ish with 44” tires! But you’d never go that fast when your on that big of a tire on one of these, definitely not speed demon at all lol!!
@@BOTTOMLESSTRAILSTV so I have a million dollar question. I've noticed you went with a 44in tire but chose a 6in portal. So you had to do some trimming. Is there a reason not going with the 8in portal.
Man I’ve measured it but it’s been a while as soon as I get home Monday I’ll measure it and let you know!! I want to say it’s around 85” tall and 77 wide
Yes sir, I use 2x12’s full width for the sides, back and top and measure to the bottom of my machine for height! At the bottom where the jack slides in I just lower my jack all the way and measure from the ground to the top of it so I can slide it right in there, super stable and alot easier than blocks lol
@@BOTTOMLESSTRAILSTV Thanks for your time and information I'm going to build some this weekend, supposed to be around 30 degrees down here in GA so a perfect shop day Thanks again
Beautiful build. How bad does the front rub with 44s and the suspension set up?
Doesn’t rub at all with steering stops and a hair of trimming on the bottom corner of the fender flares!
Sweet. I noticed the trimming of the front in the video but couldn’t tell how much exactly. Nicely done. I have the exact machine, 22 HL, looking at doing the same suspension/ tire size build. Keep up the great videos.
Yes sir thank you!!
Blake and Amber thank y’all for everything. Y’all definitely take pride in what y’all do and I’m glad we were there and involved every step of the way. That was the best two days. We also appreciate all the help from Mr Mark and Frankie. Thank you !
Your very welcome!! We had a blast doing it lol!! Look forward to many more days to come!! Mr. Mark was a big help!!
Y’all are so amazing and we are so thankful! It means so much and I can’t wait for the future and our friendship to only grow! It was the best time for sure!
Awesome videos. One of my favorite TH-cam channels. I wish you guys would slow it down and tell us what a arms, ball joints and so forth that you have had great success using. Keep ‘em coming!!!
Thank you so much!! It really means the world to us!! We definitely talked about giving more details during the video, we get so excited we never stop lol!! We definitely will have a mother build coming in the future and I’ll do better at explaining!!!
Great Video. What's the width on those 44's wides/skinnys? im looking at building the same setup? Any reason you didn't go with 8" portals. i see lots of ppl buying the 6" over the 8" and im starting to worry being i just ordered 8". Thanks
The 8” highlifter portals were not out yet and we run highlifter portals. The 44 BKT only come in an 11.2 wide and we rather the wide. There are videos previously of them in the mud.
If u can from roof of the rzr to the floor so i can measure my garage hopefully so i can put the same set up
Yes sir I’ll try to get you something!!
How tall is it, love the build
I think it was around 82” tall!! I’ll double check
With the 1.5 foward arms and portals. Using the sandcraft steering stabilizer what length tie rods do I need with the stabilizer
Billet tie rods come with the stabilizer kit! It’s a bad ass package!!
@@BOTTOMLESSTRAILSTV I went to order the kit. They asked if I wanted the ones with it. Or 18in or 19in tie rods so I'm guess the ones that come stock will work nothing special order right
@@chriso4274 it should man, which year machine do you have? And model
@@BOTTOMLESSTRAILSTV 21 rzr xp 1000 highlifter. All I did was same build pretty much. Just apexx foward aarms. 8in portals. And the tender springs
Make sure you get the smaller inner bolts and shorter rod, three orders and they sent the big ones with all them and had to exchange them!! Get with Alan booty tell him you want exactly what we have!!
What size lift in on it? I got 1 just like it and like your setup. And what size rim and tires?
6” portals
5” bracket
Tender springs
44 bkt on 24” fuel runners
What size tires and lift kit?
6” portals, 5” bracket lift, forward arms, All highlifter and 44” bkt
Really nice build!!! Of course i prefer my Can-Am Commander but still nice build!
Thanks hamma!!
@@BOTTOMLESSTRAILSTV Wish i was that good at doing a build like you!!!I suppose i could do the job just never have!!!!
Man it’s not bad at all
What are the bars called that go from lower front a arms to middle of frame?
Link bars, the support the front a arms from all the pressure of portals and big tires!!
@@BOTTOMLESSTRAILSTV Thanks
No problem hamma!!
Does Scott Smith from high lifter sponsor y’all.
No sir, we are just really great friends with the staff! They support us and we support them 💯
Very nice. Love the Channel. Can we get some more specs on it?
Thank you!!I was in a rush to post it this evening but I’m gonna go and post specs here in a couple minutes!!
Just put the full specs in the description!!!
IS YOUR CAPS LOCK BUTTON BROKEN ALSO?
THE GREATEST PART ABOUT HAVING YOUR OWN CHANNEL IS BEING ABLE TO DO WHAT YOU WANT!
Such a badass build to watch! Can’t wait to see it in action! Ready to ride! ❤️
Us too!!! Two weeks can’t come fast enough!!
What's the width on the BKT's ?
11.2”
How long are the Limiting straps?
I know the rears we get them to send us at 32” because the 34’s that come with the kit are a hair long, not sure on the fronts but it’s the kit on sandcrafts page that comes with all the nice hardware and all, top notch in my opinion
Whats the top speed using the 60 percent gear reduction
The speedo doesn’t read correct, but if I had to guess probably 40-50 ish with 44” tires! But you’d never go that fast when your on that big of a tire on one of these, definitely not speed demon at all lol!!
@@BOTTOMLESSTRAILSTV so I have a million dollar question. I've noticed you went with a 44in tire but chose a 6in portal. So you had to do some trimming. Is there a reason not going with the 8in portal.
We run highlifter dual idlers and the 8” weren’t out yet!! That’s the only reason we didn’t go 8’s on this one!!
And very minimal trimming
Nice ride dude 🤘
Man it came out so bad ass!!
Geaux Tigers 💪🏾💪🏾
You know the deal!! 👊🏻👊🏻
Hell yes that’s sick 🤒
Thank man!!
What’s the height and width on the Rzr?
Man I’ve measured it but it’s been a while as soon as I get home Monday I’ll measure it and let you know!! I want to say it’s around 85” tall and 77 wide
I need those wood rests for my machines, can you give the dimensions so I can build some of my own Thanks
Yes sir, I use 2x12’s full width for the sides, back and top and measure to the bottom of my machine for height! At the bottom where the jack slides in I just lower my jack all the way and measure from the ground to the top of it so I can slide it right in there, super stable and alot easier than blocks lol
@@BOTTOMLESSTRAILSTV Thanks for your time and information I'm going to build some this weekend, supposed to be around 30 degrees down here in GA so a perfect shop day Thanks again
@@thomasgarrett491 no problem at all man stay warm lol!!
💯💯🔥
What the set up
11.2x24 bkt on 24” fuel runners
What about there lift
The
@@alexlira5337 6” portals, 3-5 bracket lift, forward arms and tenders
Thanks
😂😂 dope video
Thanks hamma!!
Bad Ass very nice
Bad ass
Thank you!!!
Bad Ass nice
Thank you!!!
I hope your funnel get plugged 😂
Dude I was crying editing this one lol!! We laughed the whole time building it!!
@@BOTTOMLESSTRAILSTV I am definitely wanna be there for the next one. Hint Hint dad
We gonna get him to build mom one lol!!
@@BOTTOMLESSTRAILSTV definitely