Thanks for the call out to locktight #3 at 9:00 in, never heard of the stuff before, and "aviation sealant" brought up too many responses to narrow it down. look forward to learning more about what all this can do.
I like how much fun you guys have while you are solving one problem after the other. Thanks for showing us what it's like to have confidence and competence. One isn't much good without the other. Goodonya!
Always bummed when these episodes finish ! Great work guys , brings back many early 90's memories for me as I built a ripper BT1 over many years and I had sooo much fun in that thing ! Wish I could do it again now with all the advanced goodies to choose from ! The old girl was just shy of 550HP back then , the mind boggles at what could be achieved these days and how much better it would be !!
Another awesome episode guys. So cool to see my name at the end along with the other Patreon supporters. Stoked to be able support you guys and to vote with my wallet on what I think is great content
Many years ago, 2004 I think it was, I replaced the lifters in my VLt in my tiny garage as they were noisy. Watching Al do it brought back a whole lot of memories. I lubricated the hell out of everything as I put it back together, but didn't have a torque wrench, so just did everything up 'tight'. Thinking back, I'm damn lucky nothing went bang, because I gave that car a belting.
I used to make steel braided lines in a specialty shop, if you put some tape around the line before you cut it it controls most of the outer steel part and makes pushing on fittings easier. Just makes life a little easier
This is awesome, love the new series, love the no-nonsense tech info. Since I am in the states its super cool to learn the history as most if not all of the stuff we've never even heard of before.
I want that damn air chuck with the incorporated blower nozzle. have looked everywhere without luck!!!
5 ปีที่แล้ว
Strongest endorsement for anything ever. Turbo Yoda - "Yeah its good, because its good. It works good." Lmao. I love it reminds me of my grandfather. You just dont question it...
Awesome video guys. I've been watching you since the first 1. This is one of the best Australian channels and you should have way more subs and views. I used to own a VL so now you know I'm from OZ, SA in fact.. Keep the videos and your great knowledge coming. I've rebuilt many engines but your insight, knowledge, experience and the way you explain everything is just great. Cant wait to see how the turbo VL performs
One alternative to using two nuts to drive the studs in, is to use a long nut with a pin driven on the end. It bottoms out, you drive the stud in, remove the pin (sloppy fit's ok) and you can then remove the nut. Old racer trick (apparently).
that transistor was a TO-3 outline power transistor, probably a 2N3055 which has been on the market since about 1962. The format was designed to plug into thermionic valve bases....Already fairly old-hat by the 80s but also a very solid part. It was probably heat killing them more than any real flaw of design.
@The Skid Factory awesome vids, relative newcomer and going back thru the archives Pedantic I know but it's a GT3540 in B series xr6t spec, has 0.5 front housing vs 3582 0.7 and comp wheel juuuust a bit smaller I believe
![THE SKID FACTORY - RB30E+T Holden VL Commodore [EP7]](http://i.ytimg.com/vi/0LAnw21VnAg/mqdefault.jpg)
![THE SKID FACTORY - RB30E+T Holden VL Commodore [EP7]](/img/tr.png)
![THE SKID FACTORY - Old Cock's 1970 XY GT Ford Falcon [Build Review]](http://i.ytimg.com/vi/5GWCPouB_d4/mqdefault.jpg)
Turbo Yoda is a gentleman. I doubt he would ever put it in dry. That Woody on the other hand... ;P
Homoerotic car humor. Original ;-P
@@numinous4789 Hey it can be either! 😂
For sure. Def spits on it first.
If I were a human female, I'd definitely want to give birth to Al's love child.
@@ArKritz84
If you're not human, how are you typing this tweet?
25 minutes!?! This has to be good 👌
and they still went by way too fast
@@MariusAraujo WAYYYYY too fast!
You know you are going to have a good day when the Skid factory releases another video!
This guy
When are you due to be released from prison ?
@@sheelindecor7593 wat
@@sheelindecor7593 what?
12:22 Truer words have never been spoken than "every valve cover should be wrinkle red."
Unless the valve cover goes on a real engine, in which case it would be Ford Blue.
@@scottthompson292 why would you paint the top of a trash can blue?
3:20 ...... brother loves an Amen!! Nice chopping there Moog
Recovering from surgery in hospital. the skid factory release a video. God sent! You made my day keep up the good work!
bwahahaha. I was wondering how many times you had to do that take with the bin.
Came here to ask that also! LOL!
As good as Al is I knew it had to take more than 1 try lol.
The skid factory is one of the best programs on tv or the internet
the Cummins badge a clue to next diesel build??
Cummins Patrol because the Nissan diesel wasn't cutting it! :P
@Nick Galm Have you watched the diesel Patrol vids?
@Nick Galm diesel swap into a Nissan Patrol, not an engine build though.
@@justinrobertson5493 Most oil burners dont need internal spannering, Just a clean up and bolt on.
Cummins Patrol confirmed
A minute and a half ad.... longest I’ve ever watched on TH-cam, worth it for Skid Factory!
I wish I lived in Australia. Damn you guys have a massive car culture. Respect from South Africa
Appreciate that you showed the making of the oil line/s for the turbo. Something that is simple but often not shown.
Listening to alan is a tonic makes me interested in continuing to learn more than i do
great work men🍋🍋🍋
That rocker assembly design is so nice.
Awesome to hear that tune/track again from few episodes back at 3:13! I would instantly buy it if they released it as a track!
Thanks for the call out to locktight #3 at 9:00 in, never heard of the stuff before, and "aviation sealant" brought up too many responses to narrow it down. look forward to learning more about what all this can do.
I like how much fun you guys have while you are solving one problem after the other. Thanks for showing us what it's like to have confidence and competence. One isn't much good without the other. Goodonya!
Thanks for adding reference information for line sizes and hose type. Really helps for future DIY projects.
Always bummed when these episodes finish ! Great work guys , brings back many early 90's memories for me as I built a ripper BT1 over many years and I had sooo much fun in that thing ! Wish I could do it again now with all the advanced goodies to choose from ! The old girl was just shy of 550HP back then , the mind boggles at what could be achieved these days and how much better it would be !!
Such a treat after a big day at the orifice, tunes are great too....thanks fellas
Another awesome episode guys. So cool to see my name at the end along with the other Patreon supporters. Stoked to be able support you guys and to vote with my wallet on what I think is great content
heroes.
Great watching a show by professionals that know their craft.
Haha Al at 2:50, i was in glasses denial for years, until my arms weren't long enough to bloody focus. Love the channel guys.
spot on! nice one for another video and one of proper length! i can't get enough of full length vids vs tabbing up short ones in a row!
All those yt subscriptions, all those vid's... Skid Factory is always the first! 💕💕👌
Many years ago, 2004 I think it was, I replaced the lifters in my VLt in my tiny garage as they were noisy. Watching Al do it brought back a whole lot of memories. I lubricated the hell out of everything as I put it back together, but didn't have a torque wrench, so just did everything up 'tight'. Thinking back, I'm damn lucky nothing went bang, because I gave that car a belting.
I used to make steel braided lines in a specialty shop, if you put some tape around the line before you cut it it controls most of the outer steel part and makes pushing on fittings easier.
Just makes life a little easier
This is awesome, love the new series, love the no-nonsense tech info. Since I am in the states its super cool to learn the history as most if not all of the stuff we've never even heard of before.
Credit to your production quality and editing.. a lot of work and great shots... really great to watch well-done guys
Yay! New music from Moog! Diggin' it! And of course I always love my Skid Factory. You guys inspire me!
Can't wait to see the valve cover internal camera footage of the first start.
Thankyou Al, for the use of my favourite word "Dunger". Deadset pair of Legends.
So stoked to see all the patreon love. I love the tunes you guys use. It makes me want to get in the shed and spin spanners on my 80s junk subaru B-)
Wrinkle red is a deff must !!!
That RB30E+T at the end waiting to go in, looks sick! Good work boys!
That turbo looks staunch on that motor!! Very nice.
yes, i'm sure it's very loyal, being from a ford and all...
Get these legends to 100,000.
I like the picture of Kramer in the background
Hey Woody quick neat trick get a big ass clear tub you can use it to cover your work in between coats.
Moog, release the skid Factory music!!!!!! All of it! I like the back ground music of this episode!!!!
School is important and all, but when an episode of THE SKID FACTORY is released, assignments have to wait 😂
Y’all make my day🙌
Skid Factory? yes, please
Committed to that 5:50 ad for you boys. Always worth the wait. Cheers
"Don't put it in dry" That's all around good advice for any situation.
I want that damn air chuck with the incorporated blower nozzle. have looked everywhere without luck!!!
Strongest endorsement for anything ever. Turbo Yoda - "Yeah its good, because its good. It works good." Lmao. I love it reminds me of my grandfather. You just dont question it...
thats a mean looking straight 6, the wrinkle red for sure is the icing on the cake
My new favorite car build TH-cam channel! Keep up the awesome work.
Everything about this episode made me smile!
Damn. One hell of a good cliff hanger. Cant wait to see it in the car.
Great song when you guys were putting in the cam! Always enjoy your videos!!
how could 4 people dislike this even when it hasnt been out long enough to watch it in full!
liked before i even watched!
James Whelan clearly people who’ve been chopped by VL turbos before 😂
Could watch this guy work on an RB all day long
Dont eva change you two bounce off each other its such a crack up
Al holds that cam card like he's reading a fortune cookie message
Great video guys, I learn something every time I watch a Skid Factory video.
now that is a proper length episode.
You can tell you're a subi guy at heart if you require wrinkle red. Those sti intake manifolds lol!
I even let the ads play through for these guys, quality content 😎
It annoys me the people can unlike these videos if they dislike it they shouldn’t be watching it keep up the grate videos 👌
Love the "vee log piss take" Much air snorted out of my nose. Best car channel guys keep it up!
AN fittings sound like the performance stickers they add hp
I did wonder how many takes launching it into the bin.
Loving the new channel (well stand alone) stuff dudes. Keep it coming strong.
It would be awesome to see a daily vid. Thumbs up lads
Awesome video guys. I've been watching you since the first 1. This is one of the best Australian channels and you should have way more subs and views. I used to own a VL so now you know I'm from OZ, SA in fact.. Keep the videos and your great knowledge coming. I've rebuilt many engines but your insight, knowledge, experience and the way you explain everything is just great. Cant wait to see how the turbo VL performs
That patreon list! 👌🏼 great work fellow viewers
Over the shoulder round file shot is a thing of legends. Be gone.
Kills me waiting for these videos to come out. Love it boys
Choo Choo!!!! Movin' toward completion!!! Thanks for a the vid!!!
Epic job there lads.... outtakes at the end were lol... massive air high 5 to u both
That lil' pop @ 16:12
Keep up the great work Yoda and Woody!
One alternative to using two nuts to drive the studs in, is to use a long nut with a pin driven on the end. It bottoms out, you drive the stud in, remove the pin (sloppy fit's ok) and you can then remove the nut. Old racer trick (apparently).
yeah, but you need a long nut for that. it's more likely you would have two nuts of the correct size to hand.
This channel brings me such joy when a notification bell rings for a new vid! Cheer
best series on youtube well done boys
Engine’s looking sweet guys! Love that Patreon roll at the end.👍🏼🤘🏼😎
that transistor was a TO-3 outline power transistor, probably a 2N3055 which has been on the market since about 1962. The format was designed to plug into thermionic valve bases....Already fairly old-hat by the 80s but also a very solid part. It was probably heat killing them more than any real flaw of design.
Hahaa! I thought that right shoulder throw couldn't have been the first take. Good episode boys.
Not fair, I have too much work to do and another Skid Factory video drops!
Great series guys, loving this build
A 24 minute video that's pretty nice
Semen injectors had me in fits !
Thanks guys 👌🏻
Loving this channel. Loving the videos. Keep it up Yoda and Rodriguez.
Great beat @3:13!
Well done outtakes
Another great episode guys 👍
Good stuff as usual guys.
The Cummins badge and DeBoss Garage shirt better be some kind of foreshadowing.
When Al pulled the GFB regulator out of the box, I thought he was going to be holding the 8 ball, since it was a perfect place to slip it in.
I think the 8 ball only features once per build. Otherwise it gets old too quickly :P But yeah, perfect place for it to show up!
Red indian hand gasket syellac... Me likey!... Still keep one of those in stock whenever i need to use carbon/asbestos gasket
@The Skid Factory awesome vids, relative newcomer and going back thru the archives
Pedantic I know but it's a GT3540 in B series xr6t spec, has 0.5 front housing vs 3582 0.7 and comp wheel juuuust a bit smaller I believe
Nice long episode; cheers guys!
Slowly but surely towards the 100k subscribers
AL you should teach at tafe or something mate because i think youve got a great knowledge and presentation style
I agree al, wrinkle red all the way!
80's thrash was the best thrash ;).
I was about 11/10 satisfied when Al Backhanded that into the bin 😂
Keep up the good work on the imitation pigeon machine!
I think I'm at the point where I'm ready for a 3 hour episode