superoo sick love the ol xy, if old cock needs another part suppler try Gerace restorations in Hilton South Australia, he's got a few original xy gtho's and loves that era vehicles.
And in the Bad Obsession video had a Skid Factory saying in it, They talked about Smutz while modding their sump. Watched Bad Obsession just before this video. :)
The only bad thing about skid factory and bad obsession is we don't get videos daily. That said the boys at bad obsession have really started knocking out content now which is sorted.
Specifically when there is a engine mounted scoop with a hole in the hood shaker is the most common. Talking production car only. If I'm not wrong Chrysler were the only to do that
Here in the States the Cleveland dominated in pro-stock drag racing. They were so successful that NHRA kept throwing weight at them until they got what they wanted, a Chevrolet in the winner's circle. They also remained in NASCAR until the FR9 engine came out. The NASCAR Cleveland ended up being a Clevor (Windsor short block with Cleveland heads). But the architecture remained largely unchanged. You could still bolt stock valve covers on a NASCAR Cleveland head. The SBC had the have at least two major cylinder head architecture changes to keep up. It wasn't really until the 5.0 movement when the Fox came out that the Windsor really started to shine as a true performance engine. The parts the aftermarket developed for the 5.0 bolted right into the Windsor and in stock form had 51 more cubes. Add to that the fact that you can go 408ci with a factory 351W block easily and the relative ease of finding a Windsor block vs. a Cleveland now and that's why the Windsor is currently more popular over here.
My brother in-law was the first journalist to test drive an XY GT HO ,he drove it from Melbourne to Albury and back again average speed of 100mph at one stage he held it flat out for 15 mins ,he was editor for wheels magazine at the time
This car is basically God tier here in Australia. It will get more looks than any supercar and that's from non car people as well, that's how iconic it is.
Did you guys like your Ugly? I actually looked up the company and am in the market! So, thanks for getting that sponsorship. Anyway, a shaker in the US is mounted to the engine air intake and sticks through the hood the same as y'all. It doesn't even have to take in air. When I was 18 I had a 1979 Trans Am with a shaker hood. The "scoop" pointed backwards and there was no air inlet! If it is affixed to the hood, it is called a scoop. So, probsably the same.
Most people call them shakers here in the states as well. Thanks for the great videos guys great work. Awesome builds. My favorite car channel by far. 🤟👍👍
But over here AMC and Chrysler did "shakers" from the factory. Some of us dream of what could have happened to our Falcon after 1970, especially seeing what happened down under.
Hi Al and Woody, love your work. I have been a mechanic for a lot of years, worked on heaps of 60s, 70s and 80s v8 muscle cars and done my fair share of drag racing and built a few race engines. In regards to the axle hop issue with this black XW/XY don't forget to consider the engine mounts, for a simple test of the theory put a cable or chain from the left front of the head to the sway bar mounting bolt and lay a burnout, I have found this to fix axle hop on more than one occasion.
Respect to Old Cock as I love these old girls an it just awesome to see them on the road every so often . Love it when someone puts in this much work an give the old girl the respect she due.
Thankyou guys for your efforts! Most men won't think about it or admit it, but such an awesome feeling the instant you see a new Skid Factory is up! Buy some merch and watch all the ads to support the boys! Two small notes = if you ever get the chance to figure out another person or logistics of it. Some outside shots of the driving cars would be awesome. The only thing missing from your vids (rolling shots even better). And don't be shy of really lingering on, getting right in there with some detail shots of the components/customizations of the cars while Al talks over instead of trying to keep Al in the actual frame throughout the whole video. We want to bask in the workmanship, ideas, design that goes into each car you've had a hand in.
That is an amazing build, it has all the right stuff and nothing more. You could drive it anywhere too. Last is his amazing attention to detail really shows.
My father bought a new brown XY 351 GT back in 1971, sadly traded it in about 5 years later on another new car. Still think they are one of the most beautiful cars ever made.
I spotted the Nova when they hit the roundabout. Woody is rocking the Deboss Garage shirt. Another favorite channel. A buddy from Wales built a 351C back in the 80's. He said it was better than the Windsor. Maybe it had better heads. Thanks for showing us the Falcon. Mustangs were the thing to put a 351 in in the states.
Awesome car. Can't wait for the series on the Firebird. I'm a child of the 70's and 80's, so I love Smokey and the Bandit , The Duke's of Hazzard and The Fall Guy;)
Shakers here too, from what i remember. When I did circle track racing in the 80's and early 90's "Aussie Heads" were a Cleveland hot tip with some of the guys running "Clevors" (Windsor block, Cleveland heads)
Jp Kalishek obviously the main difference to go along with the head swap is a modified Windsor cam to take the Clevo valve layout . The Boss heads have screw in rocker studs for mechanical flat tappet whereas stock heads have slotted bolt down fulcrum hydraulic setup. Some water gallery mods as well. I have a set of closed chamber 4V heads and some smaller port 2V heads and the 4V’s are massive in comparison. The fords really dominated our early touring car racing in Australia when factories built homologated racing cars for the street. We had a great automotive manufacturing industry but it no longer exists as our government has sold us up the river.
@@BRETTYZCAR This was a "Stock Parts" class and all parts needed factory numbers on them, and even here in the US, Boss parts were hens teeth and costly as such. What they did was use freeze plugs and some manifold changes (manifolds were not required to be factory) for the water differences. For one version, the 2v heads were best, for the more open class, the 4v head was the way to go. Many of these classes later went with a spec head intake. One org went with a touch too much space between the gasket surfaces and the cast in name in the intake runners. A creative fellow noticed the room and shaved the heads and intake right to the names using some odd angles and ran the spec heads and manifold intended for a 351W block on the 302W block. He won 4 races before the Chevy guyd noticed caught on and said "NO." The Sanctioning body then made him put weight in front of the car to match what the difference was. Being as he was a few cubes short, they went with a 351 afterward (the size limit was 360 Cubic Inches, with the 302 they were only getting a reliable 348). The next year, the rules stated it must be a 351 block for the Fords.
Old Cock has a very well restored and updated car there and the exhaust looks like a factory unit yet it's hand built nice. as for the rest pf the car it is in pristine condition everything underneath coated so protected, the engine sounds superb yet not loud to the point it becomes obnoxious. Very well done.
@22:00 this gave me a good laugh because you perfectly described my little brother and the way he treated his first car (including the "vs commo" bit). I remember telling him how bad it was for the auto but he never listened, never really got punished either because it never actually broke (though he admitted when I showed him this that it did develop intermittent problems shifting - according to him the "fix" was to slam it in reverse a few times....)
That's a clean looking Trans Am in the background there... First car I ever turned a wrench on was a Trans Am. My first girlfriend bought a trashed one with birthday money so she could rebuild it. It was an interesting year.
I had a black on black XY GT mock up that was mint. No power steer but all the gear. Sold it for 8k to finance a wedding. Makes me cry thinking about it to this day.
It's a Shaker here too. Another cool history lesson on the Aussie versions of muscle cars. Folks say that the Cleveland got better flowing heads than the Windsor, and I dont think you could get the Windsor with the 4V heads. Keep it up.
The Aussie "Clevelands" were actually cast and built in Geelong Victoria and should probably be called "Geelong" motors. The Australian factory didn't have the thin wall casting technology that the US factory had and the engines were a bit heavier than the true Clevelands. Back in the day NASCAR teams used to use the Australian blocks because they were a bit heavier and tougher.
select D for maximum respect!! love it!! people look at me weird if I ever say that line hahaha Love the XY though... helped a mate build his own down in Vic... Loved that car!!
Many moons ago (mid 80s), I had a '74 XB 4 door with a Clevo. Was originally a 302 + C4 + BW diff. Someone did the engine first, 351 crank and rods, 4V heads and an Edelbrock Torker single plane manifold. Drank like a fish and turns out it had 8 burnt exhaust valves when I got it. Man it was fun fixing it up and I sunk all my paychecks into it. Learned as I went, rebuilt heads, rebuilt long block, new cam, dual plane Performer manifold, spacer, Holley, 4 into 1s, painted, chromed, high compression. Long story short, it went like the blazes and still got reasonable economy, thanks HP Books. Went through 3 gearboxes and 3 diffs before upgrading them. Oh the memories. If only they had fuel injection and all the other modern ancillaries back then. Worst mistake I made was selling it. Very tempting to try again.
Awesome...very interested in how the throttle body and fuel rail was installed on manifold. Might be my next change to my Cleveland. Great video on one of the best cars Australia built
First, in the states, the Cleveland is still the motor of preference, we just use the Windsor more due to costs. W motors are easier and cheaper to come by. If cost is not a guiding factor or concern, always go for the Cleveland. We have tons of hipo goodies for them. Second, a shaker scoop is a shaker scoop. Other non-shaker scoops are "insert type name here" induction. Ram air, cowl, etc. Just wanted to clear up any confusion.
I think the Windsor caught on here because anything with a Cleveland head was a BOSS model and therefore costs 10 times what it should. Your XYGT is a very cool build.
GTHO,s had modified suspension, rear end had an extra leaf in the springs and track rods,sway bar set up with larger brake drums on a Detroit locker diff. The front brakes were ventilated disc brakes with heavier springs and swaybar,also the GTs had a quicker turning ratio steering box. They also came brand new from the factory with options like power steering, air conditioning .
In the US it's also called a shaker hood scoop. For the same reason. We had two versions, the boss 302 like on that one and the CJ, which had a point to go with the hood line.
1) they call 'em shakers in the usa too 2) glad aussies took a liking to the clev as it's a great head design and now some of the best parts for them come from you guys. love aussie muscle cars.
That shaker design, on top of being included in our vintage mustangs as people have mentioned, was also used on the '03-'04 Mach 1. I own one and it definitely torques the scoop under load. Also, I love watching some of the Australian "Touring Car Masters" stuff on TH-cam where they still race this sort of awesome vintage stuff. Equivalent to our old "Trans Am" kinda series in the States I guess.
![THE SKID FACTORY - V8 Turbo Ford Fairlane [EP1]](http://i.ytimg.com/vi/YwIUolF28_E/mqdefault.jpg)
Need some merch? get it here! www.theskidfactory.com
wwe call it a shaker here in Canada to. i have a '74 GTO and it has a shaker hood to... best thing!
Got one on the way
It's got louvres too Al, don't forget them.
Its called a shaker in the US too
superoo sick love the ol xy, if old cock needs another part suppler try Gerace restorations in Hilton South Australia, he's got a few original xy gtho's and loves that era vehicles.
Bad obsession motorsport AND a Skid Factory build review. My saturday is starting ace.
Blessed day indeed.
And a cars and cameras surprise friday video
And in the Bad Obsession video had a Skid Factory saying in it, They talked about Smutz while modding their sump. Watched Bad Obsession just before this video. :)
Dont forget Finnegans garage
The only bad thing about skid factory and bad obsession is we don't get videos daily.
That said the boys at bad obsession have really started knocking out content now which is sorted.
Here in the US, when the scoop is attached to the engine like that and not to the hood/bonnet we do call it a shaker as well.
Forced air induction, ram air, shaker hood air intake,. What other names do we have..😉
Bug catchers
@@jarleron4788 unicorn intake 😀
Specifically when there is a engine mounted scoop with a hole in the hood shaker is the most common. Talking production car only. If I'm not wrong Chrysler were the only to do that
70s trans ams? maybe im wrong
Here in the States the Cleveland dominated in pro-stock drag racing. They were so successful that NHRA kept throwing weight at them until they got what they wanted, a Chevrolet in the winner's circle. They also remained in NASCAR until the FR9 engine came out. The NASCAR Cleveland ended up being a Clevor (Windsor short block with Cleveland heads). But the architecture remained largely unchanged. You could still bolt stock valve covers on a NASCAR Cleveland head. The SBC had the have at least two major cylinder head architecture changes to keep up. It wasn't really until the 5.0 movement when the Fox came out that the Windsor really started to shine as a true performance engine. The parts the aftermarket developed for the 5.0 bolted right into the Windsor and in stock form had 51 more cubes. Add to that the fact that you can go 408ci with a factory 351W block easily and the relative ease of finding a Windsor block vs. a Cleveland now and that's why the Windsor is currently more popular over here.
Fair play mate that was really interesting!
Cheers.
These are the little bits of knowledge I love hearing from other car guys...the ins and outs and tricks of back in the day. Cheers mate
Clevor is a Cleveland block with Windsor heads. A Windsor block with Clevo heads is a Boss.
My brother in-law was the first journalist to test drive an XY GT HO ,he drove it from Melbourne to Albury and back again average speed of 100mph at one stage he held it flat out for 15 mins ,he was editor for wheels magazine at the time
His name is Mel Nickels top bloke I'm lucky to have had a smart sister who married a decent man
I loved reading that story up till my copy got borrowed 15 odd yrs ago. Still have a few yrs worth of the magazines
sorry i'm late boys, i was watching project binky
Excuse accepted Lee
I chose to watch this first ;) Binkys next
Weren’t we all!
I was half way through the Binky episode when the notification came for this one :)
Me too, decided I needed some funk to clean the schmuck out...
Binky and skid factory on the same day! yaaaaaaaaahhh!
Smile on als face the whole time showed how much he was really enjoying cruising in this thing
This car is basically God tier here in Australia. It will get more looks than any supercar and that's from non car people as well, that's how iconic it is.
I’d listen to this bloke for hours talk about anything. He’s great
As a kid of the 60's, these cars were the bees knees! Still are.
Greatest thing to happen to TH-cam. The skid factory ❤️
Ahem. Greatest thing would be the team of Marty and Moog. a-thankyouverymuch.
New skid factory and project Binky within a few hours. Well played next hour sorted
Did you guys like your Ugly? I actually looked up the company and am in the market! So, thanks for getting that sponsorship. Anyway, a shaker in the US is mounted to the engine air intake and sticks through the hood the same as y'all. It doesn't even have to take in air. When I was 18 I had a 1979 Trans Am with a shaker hood. The "scoop" pointed backwards and there was no air inlet! If it is affixed to the hood, it is called a scoop. So, probsably the same.
Most people call them shakers here in the states as well. Thanks for the great videos guys great work. Awesome builds. My favorite car channel by far. 🤟👍👍
But over here AMC and Chrysler did "shakers" from the factory. Some of us dream of what could have happened to our Falcon after 1970, especially seeing what happened down under.
my first car was an old Mopar, so the term "shaker" is well ingrained in my american nomenclature
@@stanwbaker Ford US did Shakers from factory as well. So did Pontiac.
Hi Al and Woody, love your work. I have been a mechanic for a lot of years, worked on heaps of 60s, 70s and 80s v8 muscle cars and done my fair share of drag racing and built a few race engines. In regards to the axle hop issue with this black XW/XY don't forget to consider the engine mounts, for a simple test of the theory put a cable or chain from the left front of the head to the sway bar mounting bolt and lay a burnout, I have found this to fix axle hop on more than one occasion.
Gotta be proud of the work on that car for sure.
one of the cleanest old fords ive ever seen, and i come from a muscle car family! damn good looking machine.
Those Falcons had the best cockpit dash of ANY muscle car in my opinion.
Could listen to Al talk about cars all day. Such a wealth of knowledge!
Nothing runs like a 351-Cleveland. ❤️
I had one in my 67 mustang coupe.
They have got to be the most iconic Australian built car PERIOD.
If you say PERIOD, you're a yank, not Aussie.
The most iconic by Ford. Don't forget the Chargers by Chrysler or the Monaros by GMH....
The mighty AU is
Vote the LNP out, they killed all the fun by finishing our car industry ie Thai free trade deal and Tony Abbott also re introduced fuel indexation
With the grin on that old buggers face Al is loving it.
Respect to Old Cock.Beautiful car and build.
Al gets the biggest smile while driving, was great hahaha
Respect to Old Cock as I love these old girls an it just awesome to see them on the road every so often . Love it when someone puts in this much work an give the old girl the respect she due.
What a mint looking GT love the colour
Think it's really cool how they like such a variety of cars. You could see the smiles per gallon
Thankyou guys for your efforts! Most men won't think about it or admit it, but such an awesome feeling the instant you see a new Skid Factory is up!
Buy some merch and watch all the ads to support the boys!
Two small notes = if you ever get the chance to figure out another person or logistics of it. Some outside shots of the driving cars would be awesome. The only thing missing from your vids (rolling shots even better). And don't be shy of really lingering on, getting right in there with some detail shots of the components/customizations of the cars while Al talks over instead of trying to keep Al in the actual frame throughout the whole video. We want to bask in the workmanship, ideas, design that goes into each car you've had a hand in.
That is an amazing build, it has all the right stuff and nothing more. You could drive it anywhere too. Last is his amazing attention to detail really shows.
Brings back memories of a buddy's Boss 351 Mustang. Nice car, love the upgrades.
Nice job building the old girl.
The only thing that would make these awesome reviews more awesome, would be some drive-by shots.
binky and skid factory released on the same day, I'm stoked.
Beautiful car... but I was more excited to see the Old Cock references. I was not disappointed!
My father bought a new brown XY 351 GT back in 1971, sadly traded it in about 5 years later on another new car.
Still think they are one of the most beautiful cars ever made.
I love how Al can't stop smiling driving this
Cleveland engine is the high performance engine, heavier yes, but also stronger. The heads flow like mad. Good video
I spotted the Nova when they hit the roundabout. Woody is rocking the Deboss Garage shirt. Another favorite channel.
A buddy from Wales built a 351C back in the 80's. He said it was better than the Windsor. Maybe it had better heads. Thanks for showing us the Falcon. Mustangs were the thing to put a 351 in in the states.
Awesome car. Can't wait for the series on the Firebird. I'm a child of the 70's and 80's, so I love Smokey and the Bandit , The Duke's of Hazzard and The Fall Guy;)
I guess the shaker really is about cold air intake, Really good video, really sensible mods.
Never had to pause a video this many bloody times
Don't worry - we call it a shaker hood here in Burgerland, too!
Shakers here too, from what i remember. When I did circle track racing in the 80's and early 90's "Aussie Heads" were a Cleveland hot tip with some of the guys running "Clevors" (Windsor block, Cleveland heads)
Jp Kalishek which is what a Boss is.
@@BRETTYZCAR pretty much, but slightly different. The original Elliot and Yates motors were sorta Clevelandized heads as well
Jp Kalishek obviously the main difference to go along with the head swap is a modified Windsor cam to take the Clevo valve layout . The Boss heads have screw in rocker studs for mechanical flat tappet whereas stock heads have slotted bolt down fulcrum hydraulic setup. Some water gallery mods as well. I have a set of closed chamber 4V heads and some smaller port 2V heads and the 4V’s are massive in comparison. The fords really dominated our early touring car racing in Australia when factories built homologated racing cars for the street. We had a great automotive manufacturing industry but it no longer exists as our government has sold us up the river.
@@BRETTYZCAR This was a "Stock Parts" class and all parts needed factory numbers on them, and even here in the US, Boss parts were hens teeth and costly as such. What they did was use freeze plugs and some manifold changes (manifolds were not required to be factory) for the water differences. For one version, the 2v heads were best, for the more open class, the 4v head was the way to go. Many of these classes later went with a spec head intake.
One org went with a touch too much space between the gasket surfaces and the cast in name in the intake runners. A creative fellow noticed the room and shaved the heads and intake right to the names using some odd angles and ran the spec heads and manifold intended for a 351W block on the 302W block. He won 4 races before the Chevy guyd noticed caught on and said "NO." The Sanctioning body then made him put weight in front of the car to match what the difference was. Being as he was a few cubes short, they went with a 351 afterward (the size limit was 360 Cubic Inches, with the 302 they were only getting a reliable 348).
The next year, the rules stated it must be a 351 block for the Fords.
Love the commentry.. spot on.
Just the way I love my old cars. Done right but not overdone. Awesome ride hope to see a lot more of it in future vids
Old Cock has a very well restored and updated car there and the exhaust looks like a factory unit yet it's hand built nice. as for the rest pf the car it is in pristine condition everything underneath coated so protected, the engine sounds superb yet not loud to the point it becomes obnoxious. Very well done.
Simply the best car show on the Tube! Cheers fella's
It keeps us going in between Project Binky episodes.
That's a hell of a build for a old Ford engine! Great job on that one!
@22:00 this gave me a good laugh because you perfectly described my little brother and the way he treated his first car (including the "vs commo" bit).
I remember telling him how bad it was for the auto but he never listened, never really got punished either because it never actually broke (though he admitted when I showed him this that it did develop intermittent problems shifting - according to him the "fix" was to slam it in reverse a few times....)
The old school handbrake talk brought up some nice memories.
Being able to pushstart your car without taking off the handbrake was a feature in my day.
the underside of that beauty is truly a builder's goals! Bravo
Beautiful build. Convo Pros are the best wheel around. Old Cock has the same idea as me. Old and modern all rolled into one. Love it
One of the best looking cars of the era!
That's a clean looking Trans Am in the background there...
First car I ever turned a wrench on was a Trans Am. My first girlfriend bought a trashed one with birthday money so she could rebuild it. It was an interesting year.
so good to see this kinda stuff on youtube, thanks fellas
my mate used to have an XC with 351 Boss - Cleavland bottom end with a Windsor top end. it was mint.
I love the creativity and persistence with the "Old Cock" easter eggs! Drinking a squash to your good fortune! Keep it up gents!
I had a black on black XY GT mock up that was mint. No power steer but all the gear. Sold it for 8k to finance a wedding. Makes me cry thinking about it to this day.
I get sad when i see the thumbs down on these videos! If you don't like the awesome content guys your on the wrong chanel.
come on love the front corner windows that's where you flick the cigarette ash dam i miss those
Roland Knoll Quarter glass
It's a Shaker here too. Another cool history lesson on the Aussie versions of muscle cars. Folks say that the Cleveland got better flowing heads than the Windsor, and I dont think you could get the Windsor with the 4V heads. Keep it up.
I live 20 minutes from the factory these engines were built in that gave them their namesake :)
The Aussie "Clevelands" were actually cast and built in Geelong Victoria and should probably be called "Geelong" motors.
The Australian factory didn't have the thin wall casting technology that the US factory had and the engines were a bit heavier than the true Clevelands. Back in the day NASCAR teams used to use the Australian blocks because they were a bit heavier and tougher.
@@peterandrews6714 But you don't have a "Geelong" engine without a Cleveland engine first :)
Even the grooves in the tyres are clean.
select D for maximum respect!! love it!! people look at me weird if I ever say that line hahaha
Love the XY though... helped a mate build his own down in Vic... Loved that car!!
So much Ford goodness. Grate channel guy's. Keep it up. Gotta love the muscle over the rice burner.
Beautiful car. Very well done. Love the rack conversion and the Holley efi.
Many moons ago (mid 80s), I had a '74 XB 4 door with a Clevo. Was originally a 302 + C4 + BW diff. Someone did the engine first, 351 crank and rods, 4V heads and an Edelbrock Torker single plane manifold. Drank like a fish and turns out it had 8 burnt exhaust valves when I got it. Man it was fun fixing it up and I sunk all my paychecks into it. Learned as I went, rebuilt heads, rebuilt long block, new cam, dual plane Performer manifold, spacer, Holley, 4 into 1s, painted, chromed, high compression. Long story short, it went like the blazes and still got reasonable economy, thanks HP Books. Went through 3 gearboxes and 3 diffs before upgrading them. Oh the memories.
If only they had fuel injection and all the other modern ancillaries back then. Worst mistake I made was selling it. Very tempting to try again.
Awesome, thanks for showing this car! I'm hoping to modernize my 351M in my old truck someday, so seeing this is an inspiration. Cheers!
We call the scoop a shaker as well because it is a bad ass name for it world wide
Great car, great description from Al.
In the states we call that ‘spirited driving’ cheers
What a beautiful car
You guys crack me up! every video puts a smile on my face, no matter how foul the mood might have been beforhand!:P
Awesome...very interested in how the throttle body and fuel rail was installed on manifold. Might be my next change to my Cleveland. Great video on one of the best cars Australia built
Very nice machine boys nice to see it out an about
Beautiful car wish I had one
Beautiful car. Very well done.
Great car, love the burning chook in the background too.
First, in the states, the Cleveland is still the motor of preference, we just use the Windsor more due to costs. W motors are easier and cheaper to come by. If cost is not a guiding factor or concern, always go for the Cleveland. We have tons of hipo goodies for them. Second, a shaker scoop is a shaker scoop. Other non-shaker scoops are "insert type name here" induction. Ram air, cowl, etc. Just wanted to clear up any confusion.
I think the Windsor caught on here because anything with a Cleveland head was a BOSS model and therefore costs 10 times what it should. Your XYGT is a very cool build.
Love the show!!! Al, could you explained to us American market guys why the Aussies build four door cars?
Keep up the great work!!
Why would you build a car with 4 seats but only 2 doors?
The XY Falcon GT induction Shaker in the USA was called Ram Air and appeared on the Mach 1 428 and 351ci and Boss 302 Mustangs.
We refer to them as shakers here in the states as well. Challengers actually have a trim called the shaker or something similar. Shaker hood and all.
GTHO,s had modified suspension, rear end had an extra leaf in the springs and track rods,sway bar set up with larger brake drums on a Detroit locker diff. The front brakes were ventilated disc brakes with heavier springs and swaybar,also the GTs had a quicker turning ratio steering box.
They also came brand new from the factory with options like power steering, air conditioning .
Good on you mate you are keeping it all alive the passed
Thanks for the longer ep
Al, yeah, we call it a Shaker Hood here in the U.S. too. Love that car!
Wicked ... Very informative and good pacing
I can here the buzz of the ignition 🙂 my in car msd box is the same.
In the US it's also called a shaker hood scoop. For the same reason. We had two versions, the boss 302 like on that one and the CJ, which had a point to go with the hood line.
I’m glad he got carried away, that is a gorgeous car!
Al’s loving it. I’m loving it!
Had to give this a thumbs up.What a nice car.
1) they call 'em shakers in the usa too 2) glad aussies took a liking to the clev as it's a great head design and now some of the best parts for them come from you guys. love aussie muscle cars.
That shaker design, on top of being included in our vintage mustangs as people have mentioned, was also used on the '03-'04 Mach 1. I own one and it definitely torques the scoop under load. Also, I love watching some of the Australian "Touring Car Masters" stuff on TH-cam where they still race this sort of awesome vintage stuff. Equivalent to our old "Trans Am" kinda series in the States I guess.
We call it a Shaker too! It is a good name for it lol.
A perfect exhaust note for a street car
Bad Ass !!! I’m fixing up a 68 two door Faielane THXs ❤️
George Frempter Sic man love that shape I got a 65 2door
So so much work done.. love it
I'd heard of a shaker, never knew WHY it's called that. Neat.
Love it! That's a goddamn lovely EFI setup, very tidy.
Love the registration plate.