I am an aircraft mechanic and have learned a couple things that can help anyone. 1. If you are pulling really hard and something isn't coming out the way it should, stop, think and re-evaluate what you are doing. 2. If you are going for a longer wrench or a hammer also stop and think before you go ahead. Seems like it takes more time to think but not having to fix or replace things takes less time than stopping to think. Everyone makes mistakes even guys that do this stuff for a living have the occasional incident... I am a newbie DR650 guy and I really like your videos, they are very well done. I find the torque specification for that drain plug feels really high for my hand. I leave it a little under the recommended torque but I also safety wire the plug so the worst I will ever get is a slow leak. Thanks for your time making these videos, I appreciate it!
Oh my goodness. I was screaming at my screen. I have done this all to often. Totally one of the easiest things to do. I have gotten in the habit of giving my ratchet a twist with my hand to make sure. Thanks for sharing
Very good informative video Dino. I was told in my youth by a wise old gentleman " the person who makes no mistakes makes nothing" . He went on to say " with mistakes have a curse or a cup of tea, get calm and think how to retrieve the situation". You have demonstrated exactly what the old gentleman said. We all learn something new when we do the "fix". Thanks Dino for sharing.
Love your videos Dino. You have an excellent attitude and the repair is absolutely the best and would be as good as new if not stronger I reakon. We all make mistakes. I am 46 and make them still as adult. This video rings true to me as I was 14 years old I had a 1984 Yamaha YZ80L mx bike which was my pride and joy. I used to do aircleaner every ride and run the best full syn premix oil at 25:1 as it was back in the day. Changed the gear box oil regularly, one day I had a lapse of judgment and bloody cross threaded the dam thing(gear box oil drain while reinstalling). I still remember that sinking feeling as I felt it was threading tight all the way in. Pulled it back it and it was toast. Went with helicoil and flushed the shit out if with gear box oil to get any crap out. Worked perfect and never had a problem with it. You are very methodical and I am too. Bike shops make mistakes worst, you just don't hear about it as a customer 😂
Good on you mate! The fact that you are even showing this footage really shows how genuine you are! As you said, we all make mistakes, that's how we learn. Most would have settled for a comment reply admitting that you have made mistakes, it says a lot for you to put this out there for everyone. I've said it before, keep up the great work mate!
I am not at all mechanically inclined but I always spin my ratchet in my hand prior to tightening or loosening something just to make sure its set to go in the direction I want. Like you mentioned, it's easy to get confused when you are essentially working upside down. I certainly hope this never happens to me as I'd be hooped. I wouldn't trust myself to tap anything properly, especially in that uosode down position on an angle. Nice job on repairing what was seemingly a disaster! Also impressive that you did it all without even removing the skidplate.
Lol thanks for the comment. I have had a bit of practice over the years with a tap and was fortunate enough to have a great brother in law who was a millwright who showed how. It's a good shill to learn, you can do it too. Dino
My mistakes are my best learning lessons, although they usually cost dearly. My bud and I almost ruined a DR650 Mikuni t40 carb by trying to press out a part that did NOT need to be removed. The local mechanic had a good laugh at us when we brought it in. Live and learn, thanks for your honesty.
Hi Dino - have been watching almost all your videos on the DR650. I'm really glad you're showing this and it's such good learning for your average or early-days DIY mechanic. We've all been there if you've tinkered long enough and that moment of when a simple job turns into a whole new project is very relatable. If this is the most upset you get whilst making mistakes, you're a better person than I am....i would have been swearing and kicking myself on camera 🤬😅 The way you responded when you found out really shows that the character we see on the carefully crafted videos really is the authentic you. Thanks again for showing this...great learning and education! Keep showing those mistakes ... they're gold! 🙂
Thank for the feedback, I try to stay calm lol, sometimes it doesn't work that way but as I get older I find the level head is more productive. Thanks again Dino
Dino. The person who has never made a mistake has never learned anything. Thanks for sharing BTW. I just found your channel tonight. I'm often in your area as my Dad who is 89 years young lives in Welland
Thanks for these videos. They have definitely helped me. I bought an 07 DR650 about 6 months ago. I watched a lot of these videos to work on and upgrade the bike. The carb cleanup was the first thing I did along with replacing its seals.
Great video Dino! We all make mistakes from time to time and I'm sure it's only a matter of time before I do something like this myself and now I have an idea how to fix it.
I really enjoy your videos Dino. You are very thorough in explaining your thinking and how you handled your mishaps. I bought a 22 dr650 this year and will be a long time subscriber 👍🏽
Thank you for the feedback and congratulations on the new DR, if you are like me you'll have a great time with it. Thank you so much for the subscription, it means alot to me. Dino
LMAO! The PO of my dr650 did the same thing to two of the banjo bolts that hold the oil lines in place. He covered it all with epoxy. The bike was running fine but I wanted to clean it up. So I removed the epoxy and what do ya know- the threads are completely stripped. I thought I was gonna have to buy new engine parts, then I learned about helicoils. Thank God there’s a simple fix. Thanks for the videos Dino! Also I can vouch that DRRiders is an awesome community.
Thanks for the comment. It's easy to make mistakes, and I have myself made some sketchy repairs, but you eventually learn that the right fix is usually just as easy as the wrong one and lasts. The Drriders is a solid place to get info, I still lurk around a lot lol. Thanks for the great feedback. Dino
Wow, that would give people a heart attack when realizing the thread got stripped. Just by watching it, i felt the pain for you. At the same time your funny comments popping up within the video, made me laugh at the same time 😃 great job how you fixed it! Thankw for sharing, very usual information
This reminds me of an old adage, " women learn by watching, men learn by breaking things". When i first heard that, i looked back at my own experiences and begrudgingly had to admit there is some truth to it.😁 Cheers Lad!
Your adage reminds me of a Will Rogers quote: “There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.”
Thanks for the excellent video! My buddy and i did the same thing on my 65 mercury pickup a long time ago. The cheap solution at the time was a rubber plug from canadian tire which worked great for the rest of the life of this fine pickup. Never changed the oil again, just toped it off once in a while! 😂
Even thoguh I've done this process many times I always over think it for reasons I dont fully understand when it comes to oil changes. I actually draw an arrow in the direction needed to losen the bolt and put the tq specs on the bottom with a oil pen on all the vehicles I change the oil on for this reason. I believe the tq spec for dr 650 is 17.5-18 ft lbs.
When I installed my Acerbis 5gal tank on my DR I managed to cross thread one of the two 10mm bolts. I'm either going to have to drill and tap for a larger bolt, or try a helicoil. Thanks for the explanation how they work.
@@DinosTinkerShed Shes right for sure! For some reason I can't stop picturing a roach on a DR blasting through the desert chewing on a twinkie! Would be a great DR shirt perhaps...
Thank you very much for this video. I've always had a phobia about stripping the drain bolt, because I've always heard about how incredibly easy it is to do. Well, it is, but it isn't, as your video quite clearly illustrates. If you're bound and determined, yes, it will happen, but my goodness, that took some serious grunt to make happen. I won't be so fearful in the future. About drain bolts, anyway. . I do have one request - please don't call those Nutserts. Nutsert is a trademark for a type of rivet nut, which helicoils and Timeserts are definitely not. I know I'm being picky, but I feel it's important to call things by their proper name, to keep confusion to a minimum.
Thank you so much for the comment. Yes it took a bit to pull out the threads and you definitely feel sick when it happens. I did not even realise I called them a nutsert, it might be because I actually have a sert of nutserts and just slipped up. I agree we should call things correctly, I always feel the same way when people call Arborvitae, Cedar so I know the feeling. Thanks again Dino
Thanks for the comment, I use a BMW 650 Dakar windscreen mounted to a custom dash, here is a link about the wind screen if you wanted more information. th-cam.com/video/TDSIAlekqPs/w-d-xo.html I also have a three-part series on building the custom dash in my DR650 play list. DIno
Ouch. I'm paranoid about over tightening bolts and screws in aluminium. To the point of torquing everything and using anti seize. I actually prefer a little looser than tighter. I'm sure you wouldn't have made that mistake if you weren't attempting to help us all by making a video.
Lol, I will neither confirm or deny that I would have made that mistake if I was not filming. Truth is, accidents like this can happen to the best person and it is something you either learn to accept and laugh at or you quickly find another hobby 🙂. Thanks for the comment Dino
Let's not talk about the microscopic bolts that hold the engine cover to access the oil filter... 😞 Btw, I learn to discipline myself to always set my wrench facing it so I know I'm going counter clock to unfasten the bolt before going under my bike or car... And yes, I did the same as you on a 1250 Suzuki bandit costing me 2 miles push of the bike to the dealership to avoid paying for towing and a $150 helicoil...
Thanks for the comment. It's funny I normally do the same thing, when I watched the raw video I actually switch the ratchet just before I start to destroy the bolt. Uggg. I know for a fact that the only people who don't make mistakes are those who do nothing. Thanks for making me feel better. Dino
I've been seeing that a few people use rotella diesel oil for their DR650s. Is that a regular thing? It seems to be more affordable than designated motorcycle fuel at the bike shops but my bike is sentimental so I want to take any unnecessary risks. What are your thoughts on that oil. Or have you covered this already?
I did not need to in order to make the repair. I filmed this very early in the channel and honestly did not think to for better viewing. Just wanted to get it repaired lol. Thank you for the question Dino
Thank fully, I have learned my wrist strength is7 ft-lb my arm strength is about 60 ft-lb im im broke sockets as well no drain plug Glory to God because if anyone was to do what you did it would be me
You did the same thing I did on a Kawasaki KLT 200 when I was a kid only I managed to break the case and by the way my dad and I repaired a 1958 case terraloader we reformed the final drive shafts by filling the sprocket hubs with JB weld actually we reformed the hubs I guess.
"The only people who do not make mistakes are those who do nothing" my father taught me that and I try to remember it when I mess up. Thank you for the comment. Dino
Interesting, you are the second person to suggest this, I do agree from a visual perspective that would have been better however there was no reason to do so for the repair itself. There was more than enough access to perform the work with absolutely no restriction for tools or my hands. What would be your rational other than for video quality? Just wondering? Thank you for the comment and insight. Dino
@@DinosTinkerShed "no reason to do so for the repair itself" - well, it would be easier to see exactly what is going on, and also easier to clean up after you're done, but you are correct that it is not necessary.
I over torqued and snapped a valve cover bolt on my DR'S initial break-in period. 🫤 It wasn't easy (or clean) to get that MFer out... lesson learned: always use torque specs!
Uggg, that sucks. As pointed out in the video I learned turning the bolt the right way also helps lol. Thanks for the comment, you are very correct in your statement. Dino
I am an aircraft mechanic and have learned a couple things that can help anyone.
1. If you are pulling really hard and something isn't coming out the way it should, stop, think and re-evaluate what you are doing.
2. If you are going for a longer wrench or a hammer also stop and think before you go ahead.
Seems like it takes more time to think but not having to fix or replace things takes less time than stopping to think. Everyone makes mistakes even guys that do this stuff for a living have the occasional incident...
I am a newbie DR650 guy and I really like your videos, they are very well done. I find the torque specification for that drain plug feels really high for my hand. I leave it a little under the recommended torque but I also safety wire the plug so the worst I will ever get is a slow leak.
Thanks for your time making these videos, I appreciate it!
Glad you enjoyed the videos and thanks for your feedback and advise.
Dino
Oh my goodness. I was screaming at my screen. I have done this all to often. Totally one of the easiest things to do. I have gotten in the habit of giving my ratchet a twist with my hand to make sure.
Thanks for sharing
LOL it can happen to anyone, thanks for the comment, sorry to make you scream 😉
Dino
Very good informative video Dino. I was told in my youth by a wise old gentleman " the person who makes no mistakes makes nothing" . He went on to say " with mistakes have a curse or a cup of tea, get calm and think how to retrieve the situation". You have demonstrated exactly what the old gentleman said. We all learn something new when we do the "fix". Thanks Dino for sharing.
Wise words for sure Mal, thank you for sharing that knowledge.
Dino
Love your videos Dino. You have an excellent attitude and the repair is absolutely the best and would be as good as new if not stronger I reakon. We all make mistakes. I am 46 and make them still as adult. This video rings true to me as I was 14 years old I had a 1984 Yamaha YZ80L mx bike which was my pride and joy. I used to do aircleaner every ride and run the best full syn premix oil at 25:1 as it was back in the day. Changed the gear box oil regularly, one day I had a lapse of judgment and bloody cross threaded the dam thing(gear box oil drain while reinstalling). I still remember that sinking feeling as I felt it was threading tight all the way in. Pulled it back it and it was toast. Went with helicoil and flushed the shit out if with gear box oil to get any crap out. Worked perfect and never had a problem with it. You are very methodical and I am too. Bike shops make mistakes worst, you just don't hear about it as a customer 😂
Good on you mate! The fact that you are even showing this footage really shows how genuine you are! As you said, we all make mistakes, that's how we learn. Most would have settled for a comment reply admitting that you have made mistakes, it says a lot for you to put this out there for everyone. I've said it before, keep up the great work mate!
Thanks for the support. I'll be honest it was hard to post lol
Good on you Dino, it takes a big man to publicly admit his mistakes. I thought that tap would hit something up inside the motor. Great vid.
It's a wise man who can admit his mistake.
I am not at all mechanically inclined but I always spin my ratchet in my hand prior to tightening or loosening something just to make sure its set to go in the direction I want. Like you mentioned, it's easy to get confused when you are essentially working upside down. I certainly hope this never happens to me as I'd be hooped. I wouldn't trust myself to tap anything properly, especially in that uosode down position on an angle. Nice job on repairing what was seemingly a disaster! Also impressive that you did it all without even removing the skidplate.
Lol thanks for the comment. I have had a bit of practice over the years with a tap and was fortunate enough to have a great brother in law who was a millwright who showed how. It's a good shill to learn, you can do it too.
Dino
Champion Dino, I liked the process to repair the issue. It was good advice as to how to approach any problem.
My mistakes are my best learning lessons, although they usually cost dearly. My bud and I almost ruined a DR650 Mikuni t40 carb by trying to press out a part that did NOT need to be removed. The local mechanic had a good laugh at us when we brought it in. Live and learn, thanks for your honesty.
I was told once the only people who don't make mistakes are those that don't do anything, LOL thanks for sharing.
Dino
We've all had that "Oh no" moment. Great video on the correction!
I can't imagine anyone (but you) would have been critical of that video, well played.
Hi Dino - have been watching almost all your videos on the DR650. I'm really glad you're showing this and it's such good learning for your average or early-days DIY mechanic. We've all been there if you've tinkered long enough and that moment of when a simple job turns into a whole new project is very relatable. If this is the most upset you get whilst making mistakes, you're a better person than I am....i would have been swearing and kicking myself on camera 🤬😅 The way you responded when you found out really shows that the character we see on the carefully crafted videos really is the authentic you. Thanks again for showing this...great learning and education! Keep showing those mistakes ... they're gold! 🙂
Thank for the feedback, I try to stay calm lol, sometimes it doesn't work that way but as I get older I find the level head is more productive.
Thanks again
Dino
Dino. The person who has never made a mistake has never learned anything. Thanks for sharing
BTW. I just found your channel tonight. I'm often in your area as my Dad who is 89 years young lives in Welland
Well said, I get to Welland alot for Pizza, My buddy Karl's home town is Welland as well.
Dino
I love your videos Dino, it's my relaxation time. So I particularly appreciated the stress relief moment after such high tension and drama.
Thanks for these videos. They have definitely helped me. I bought an 07 DR650 about 6 months ago. I watched a lot of these videos to work on and upgrade the bike. The carb cleanup was the first thing I did along with replacing its seals.
I'm glad the content is helpful. And congratulations on the new to you DR, I hope it lives up to your expectations the way it did for me.
Dino
Another quality video Dino and you are a great mechanic because you take your time and do your research.
Thank you, so glad you enjoyed it.
Dino
Great video Dino! We all make mistakes from time to time and I'm sure it's only a matter of time before I do something like this myself and now I have an idea how to fix it.
Excellent video, Dino! Thank you for sharing this, excellent work.
I really enjoy your videos Dino. You are very thorough in explaining your thinking and how you handled your mishaps. I bought a 22 dr650 this year and will be a long time subscriber 👍🏽
Thank you for the feedback and congratulations on the new DR, if you are like me you'll have a great time with it. Thank you so much for the subscription, it means alot to me.
Dino
LMAO! The PO of my dr650 did the same thing to two of the banjo bolts that hold the oil lines in place. He covered it all with epoxy. The bike was running fine but I wanted to clean it up. So I removed the epoxy and what do ya know- the threads are completely stripped. I thought I was gonna have to buy new engine parts, then I learned about helicoils. Thank God there’s a simple fix.
Thanks for the videos Dino!
Also I can vouch that DRRiders is an awesome community.
Thanks for the comment. It's easy to make mistakes, and I have myself made some sketchy repairs, but you eventually learn that the right fix is usually just as easy as the wrong one and lasts.
The Drriders is a solid place to get info, I still lurk around a lot lol. Thanks for the great feedback.
Dino
Wow, that would give people a heart attack when realizing the thread got stripped. Just by watching it, i felt the pain for you. At the same time your funny comments popping up within the video, made me laugh at the same time 😃 great job how you fixed it! Thankw for sharing, very usual information
Glad you enjoyed it
Dino
This reminds me of an old adage, " women learn by watching, men learn by breaking things". When i first heard that, i looked back at my own experiences and begrudgingly had to admit there is some truth to it.😁 Cheers Lad!
Your adage reminds me of a Will Rogers quote:
“There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.”
Great job on the repair!
Thanks for the excellent video! My buddy and i did the same thing on my 65 mercury pickup a long time ago. The cheap solution at the time was a rubber plug from canadian tire which worked great for the rest of the life of this fine pickup. Never changed the oil again, just toped it off once in a while! 😂
Even thoguh I've done this process many times I always over think it for reasons I dont fully understand when it comes to oil changes. I actually draw an arrow in the direction needed to losen the bolt and put the tq specs on the bottom with a oil pen on all the vehicles I change the oil on for this reason. I believe the tq spec for dr 650 is 17.5-18 ft lbs.
When I installed my Acerbis 5gal tank on my DR I managed to cross thread one of the two 10mm bolts. I'm either going to have to drill and tap for a larger bolt, or try a helicoil. Thanks for the explanation how they work.
Glad it's helpful
Dino
Muy interesante, gracias por compartir tan valioso material, abrazote.
I have never made a mstake. Thanks for the videos.
I have used the same kit ,the only difference I did was use loctite on the insert. Great video
Lock tight may be an even better option than the rtv. Thanks for the tip.
Dino
I now refer to my shed out back as my "tinker shed" :)
That is awesome 👍
Dino
Good job staying calm Dino, I would probably have used some choice words 😂
Thanks for the comment, the choice words were there trust me, but they did not make the final cut lol.
Dino
Great vid and great fix! My heart sank for you watching this!
It is a bit hard to watch but things do happen, glad you like the video and thanks for the comment
Dino
Surely not brother!
I've heard that after the apocalypse, that the mighty DR650 would be amongst twinkies and roaches as the only survivors!
Lol believe it or not my sister has always said a dual sport is the ultimate post apocalyptic ride, I think she's right.
Thanks for the comment
Dino
@@DinosTinkerShed Shes right for sure! For some reason I can't stop picturing a roach on a DR blasting through the desert chewing on a twinkie!
Would be a great DR shirt perhaps...
Thank you very much for this video. I've always had a phobia about stripping the drain bolt, because I've always heard about how incredibly easy it is to do.
Well, it is, but it isn't, as your video quite clearly illustrates. If you're bound and determined, yes, it will happen, but my goodness, that took some serious grunt to make happen.
I won't be so fearful in the future. About drain bolts, anyway.
.
I do have one request - please don't call those Nutserts. Nutsert is a trademark for a type of rivet nut, which helicoils and Timeserts are definitely not. I know I'm being picky, but I feel it's important to call things by their proper name, to keep confusion to a minimum.
Thank you so much for the comment. Yes it took a bit to pull out the threads and you definitely feel sick when it happens.
I did not even realise I called them a nutsert, it might be because I actually have a sert of nutserts and just slipped up. I agree we should call things correctly, I always feel the same way when people call Arborvitae, Cedar so I know the feeling.
Thanks again
Dino
super material..😊 mam dr 650 re z 1995...i uwielbiam przy niej grzebac..😊😊😊...jestem z zawodu stolarzem..😊
I was wondering what windshield you use , I was watching your Bruce peninsula video and really like the dash set up
Thanks for the comment, I use a BMW 650 Dakar windscreen mounted to a custom dash, here is a link about the wind screen if you wanted more information. th-cam.com/video/TDSIAlekqPs/w-d-xo.html I also have a three-part series on building the custom dash in my DR650 play list.
DIno
@@DinosTinkerShed thanks for the reply I may be bothering you all winter , we have two new ones and need to finish setting them up
No problem. I'll do what I can to help you out. Don't forget to check out drriders.com it's a great place for new owners.
On the plus side, the helicoil is stronger than the aluminum case threads 👍🏻
That's a nice, wholesome video. 👍
Ouch. I'm paranoid about over tightening bolts and screws in aluminium. To the point of torquing everything and using anti seize. I actually prefer a little looser than tighter.
I'm sure you wouldn't have made that mistake if you weren't attempting to help us all by making a video.
Lol, I will neither confirm or deny that I would have made that mistake if I was not filming. Truth is, accidents like this can happen to the best person and it is something you either learn to accept and laugh at or you quickly find another hobby 🙂.
Thanks for the comment
Dino
@@DinosTinkerShed "it is something you either learn to accept and laugh at or you quickly find another hobby"
That's gold right there!
Enjoyed this alot.
Good thing it was Carl's bike !
Let's not talk about the microscopic bolts that hold the engine cover to access the oil filter... 😞 Btw, I learn to discipline myself to always set my wrench facing it so I know I'm going counter clock to unfasten the bolt before going under my bike or car... And yes, I did the same as you on a 1250 Suzuki bandit costing me 2 miles push of the bike to the dealership to avoid paying for towing and a $150 helicoil...
Thanks for the comment. It's funny I normally do the same thing, when I watched the raw video I actually switch the ratchet just before I start to destroy the bolt. Uggg. I know for a fact that the only people who don't make mistakes are those who do nothing.
Thanks for making me feel better.
Dino
I've been seeing that a few people use rotella diesel oil for their DR650s. Is that a regular thing? It seems to be more affordable than designated motorcycle fuel at the bike shops but my bike is sentimental so I want to take any unnecessary risks. What are your thoughts on that oil. Or have you covered this already?
Why did you not remove the skidplate?
I did not need to in order to make the repair. I filmed this very early in the channel and honestly did not think to for better viewing. Just wanted to get it repaired lol.
Thank you for the question
Dino
Looks like a blessing, steal treads will last longer
Good point
Dino
Thank fully, I have learned my wrist strength is7 ft-lb my arm strength is about 60 ft-lb im im broke sockets as well no drain plug Glory to God because if anyone was to do what you did it would be me
You did the same thing I did on a Kawasaki KLT 200 when I was a kid only I managed to break the case and by the way my dad and I repaired a 1958 case terraloader we reformed the final drive shafts by filling the sprocket hubs with JB weld actually we reformed the hubs I guess.
JB weld is amazing stuff for sure, I use it myself quite often. Thank you for the comment and sharing your experiences.
Dino
Excuse me I meant to say I did the same thing.
NP I understood the post, in fact I did not even notice the error until you pointed it out, all good.
Dino
@@DinosTinkerShed having a major clutch issue with my 21'dr650 any way you can help me resolve it?
@@DinosTinkerShed I seem to have fried my clutch practicing slow turns.
Great content as usual..
Thank you. This really helpful
Your welcome, glad it's helpful.
Dino
I just watched my buddy do this to his sportster! It happens to the best of em
"The only people who do not make mistakes are those who do nothing" my father taught me that and I try to remember it when I mess up.
Thank you for the comment.
Dino
We've all been there at some point
Your a very clever man 🧠
Thank you, but the camera hides alot lol.
Dino
A whole lots of bleeps on that video had I made it.
Oh there were plenty of bleeps that I edited out lol.
Dino
Sporadic squirrel 😂
We love our squirrel friends lol. Just keep out of the house squirrel 🐿️!
Hey! flower boy! so you're a horticulturalist by trade... cool man! (I'm still hoping for a mini bio)
LOL, Ill work on the Bio.
Thanks for the comment
Dino
For that repair i consider that you should first take off the skid plate!!!!!
Interesting, you are the second person to suggest this, I do agree from a visual perspective that would have been better however there was no reason to do so for the repair itself. There was more than enough access to perform the work with absolutely no restriction for tools or my hands. What would be your rational other than for video quality? Just wondering?
Thank you for the comment and insight.
Dino
@@DinosTinkerShed "no reason to do so for the repair itself" - well, it would be easier to see exactly what is going on, and also easier to clean up after you're done, but you are correct that it is not necessary.
Lol
I over torqued and snapped a valve cover bolt on my DR'S initial break-in period. 🫤 It wasn't easy (or clean) to get that MFer out... lesson learned: always use torque specs!
Uggg, that sucks. As pointed out in the video I learned turning the bolt the right way also helps lol. Thanks for the comment, you are very correct in your statement.
Dino