How To Hang a Door with Soss Invisible Hinges
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Learn how to hang a door using the SOSS Invisible hinge system.
Visit www.soss.com to learn more about SOSS invisible hinges.
Follow me on Instagram: / jonpeters_
Subscribe to the Jon Peters Shop Talk: / jonpetersar. .
Facebook: / art-ho. .
Website: jonpeters.com/
The tools and products I use most frequently:
Woodworking Products:
Bosch 10-Inch Dual Bevel Axial-Glide Compact Miter Saw: amzn.to/2M7Pm7G
24" Sure-Foot Aluminum Bar Clamp: amzn.to/2JArKtL
48" Sure-Foot Aluminum Bar Clamp: amzn.to/2M3t4nr
Powermatic 10-inch 3 Horsepower Tablesaw: amzn.to/2JzZesk
Hitachi 10 inch Sliding Compound Dual Lever Miter: amzn.to/2LxLpZ1
Milwaukee M18 Fuel 2 Combo Kit: amzn.to/2JhwYeO
Milwaukee M18 FUEL 18-Volt 7 1/4 in. Circular Saw: amzn.to/2JzZNlW
DEWALT DW2567#6 Countersink 9/64-Inch Drill Bit: amzn.to/2sJqk5K
Jet Drum Sander: amzn.to/2Lt7FD6
BOSTITCH 1-Tool and Compressor Combo Kit: amzn.to/2Jhc9jr
Flexzilla Air Hose, 3/8 in. x 50 ft: amzn.to/2sN7L0F
3m(TM) Half Facepiece Respirator (Dust mask): amzn.to/2sF6Ekg
Titebond II Premium Wood Glue: amzn.to/2JIgF70
3M Paint Project Respirator: amzn.to/2M7gQdK
Milwaukee 18-volt Compound Miter Saw: amzn.to/2JoGybT
Home/ Garden Products:
Zero-G 50ft Hose: amzn.to/2sDaASS
Greenworks Hedge trimmer: amzn.to/2M4ZFcN
Greenworks 40-volt chain saw: amzn.to/2M0AjwB
Greenworks 80-volt blower: amzn.to/2M79Q0r
Video Production Products:
Apple MacBook Pro 13.3-Inch Laptop: amzn.to/2M8X7Kv
Cannon M50: amzn.to/2JeSr82
Cannon EOS 80D Digital SLR: amzn.to/2Jzk3Eu
Rode Compact Shotgun Microphone: amzn.to/2JAyFTL
Apparel Sponosor: Mountain Khakis
www.mountainkha...
/ mountain. .
/ mountainkhakis
/ mountainkhakis
/ mountainkha. .
Live Life Untucked, #WorkHardPlayHarder
Your a gifted carpenter. I’m not really talking about this particular video but to all of your videos. I have learned a lot from you. Thank you so much
Jon thanks so much for this video, I have 28 doors to install and it will be my first time installing hinges.
Thanks for all the great comments...I'll be doing a follow-up video on hanging the door based on your questions.
can you use a trim router with there jig. thanks
Donald sharp
Donald sharp hgngg
Jon Peters Art & Home nice
I DID, I REALY STALLED A SWING GATE DOOR USING THAT HINGES AND WORKED PERFECTLY
Nice video - very helpful. Can you post a plan detail showing the jamb stud alignment? Thanks for the video and replies.
I JUST SAW YOUR VIDEO I DID HIRE A GUY TO DO THIS WORK LONG AGO NOW I DO HAVE A NEW JOB AND I WILL NEED AN EXPERT. AT LEAST I KNOW WHAT HE HAS TO DO. GREAT VIDEO.
Thank you for y our video! First, why wouldn't you cut both the shallow and the deep mortises on the door before you removed the jig? Second, Have you done an install with there Automatic Close option? Thanks again!
Great video. I've been doing doors strictly since 1997. These hinges are great for interior use. Exterior use would seem difficult to weatherstrip with compression copper weatherstrip. I guess you could use pop in Q-Lon, cheap weatherstrip but that would be like building the BMW but opted for hub caps instead of real rims. I have used this Hong on jewelry boxes also. Smaller of course.
Thanks Roger
Hi Roger, what would you suggest for outdoor use? I need to rehang a bungalow door to open to the outside because the floor has shifted & the threshold now has an uneven gap. As a result the door doesn't fully open to the inside anymore. Having a hard time finding hinges that aren't a security concern.
Excellent install Jon! those hinges really look great...just wish I had seen this video before I took on my basement door two weeks ago!
Nice hinges. Seem simple to install using their jig setup.
I`m a woodworks DIYer,love everything you build,but don`t have all the tools i want,i only have just a few,it makes me happy when i build one project.
Yes I have a question,why are your project always built to perfection.Awsome job, keep it up.
Perfection brings beauty, beauty attracts customers
How to hang a door wothout visible hinges
Sir
Very nice idea and demonstration only a skilled technician can demonstrate.
I saw this invisible hinges for the first time. The gadjets u used there in itself is worth watching and education to all invoved in wood working skills.
Vatsa BANGALORE INDIAí
THOSE HINGES ARE AMAZIN, did not know those existed
They are very expensive though also these hinges are very sensitive to the weight of the door so if the door is heavy, when you close it might bend down.
Enjoyed your video. I may use these hinges on a few doors made to look like wainscoting in a bedroom.
Very smart video. Very sensicle process. Easy to understand. Doing mock ups and trial runs is a good investment of your time. Good light and sound. The Soss jig is somewhat underwhelming and I have to wonder just how long those screw hole will hold up.
Thanks George
Jon Peters Art & Home
What type of door are you using? Do you recommend a manufacturer? Also for your jam do you have a preferred Material\manufacturer? When you prepared the framing for the door did you give yourself a tolerance for the door? Or did you measure the opening the exact measurement of the door
Curious as to the reasoning behind moving the jig form door to jam and then back to door. Why not cut the shallow and deep mortise without moving the jig. Seems like an opportunity to get holes misaligned.
เยี่ยมมากครับ ขอบคุณสำหรับความคิดดีๆ บานพับชนิดนี้ ไม่ทราบว่าที่ประเทศไทยมีขายหรือเปล่า คงต้องไปดูที่โฮมโปร ขอบคุณอีกครั้งครับ
Hi John i am from Pakistan i also carpenter i like your work and working aedia 👍👍👍👍👍👍
Nice video ! Why didn't you make all the box with plexiglass so whatever the box is oriented it let the sun come into the box ?
Awesome, you make it so simple, so with the buck stud is that what you would attach the trim molding to on the interior and then what would the exterior look like?
Thanks for the video, you sir are AWESOME!!! Quick question, Im assuming that door jamb and door were built to be flush with the drywall? If so do you have a video of how to build those type of door jambs? And if not can you make one or send me some tips on how to do this? I plan on a big reno in my townhouse and have always loved the "no trim, flush door jamb" modern aesthetic!!! Thanks bro!!
first question: is the door right up against the jamb with these hidden hinges, or is there at least a 1/32” of space ?
second question: will the door open all the way and clear the casing, or is it limited ?
Hmmm, Wouldn't it make more sense to route the mortises on the buck stud before it is attached to the framing? Then you could just do it on a bench at a much more comfortable working height.
Wordsnwood (Art Mulder) सोफे
Wordsnwood (Art Mulder) النجارة
No. For too many reasons. The guy explained the best way to do this job period.
If you don’t like it that way why you watching a video like this , just do it your way
If you don’t like it that way why you watching a video like this , just do it your way
Wirh those deep mortises it seems like hanging the door was easier than wirh conventional hinges.
Best jig i have every seen
If you are using only one jig, do you still flip it over so that the sticker is resting against the jamb? Didn’t see that in the paper instructions that came with the jig.
thank you for this video,we don't prefer to use this hings in Iran because the doors frames are made from metal but this hing is really sweet
Thanks
Nice job. Seems to me that the Soss hinge would be premium and well served.
Your videos are very simpel to understand for begunner like me..
Keep good work mate..
Nice. Fits like a glove.
Why not cutting the deep mortise in the door at the start, before moving the jig to the frame?
Great job clean and professional.
great video Jon. always enjoy your videos when you share your experience with us. may I ask if any major retailer carry's these hinge and a price?
Do the Soss hinges say which side goes in the frame and which side goes in the door? as I noticed at 5:11that you fitted them so the door was swinging from the underside of the hinge as opposed to sitting on top which I would of thought was a stronger way of fitting them. Hope that makes sense.
Does the lock side of the door edge need the same bevel as when using regular door hinges, and is the hinge side reveal the same as regular door hinges, or is it tighter?
Are there adjustment options for out of square frames once installed please
Salam
Great looking hinge and easy to understand video.
WOW this is a beautiful design. great guide
goliaa718 very good sir
excelent work Jon!!
Nice tools and great work TQ
Good one, Best way to install instruction.
what if my jamb isn't deep enough. I dont have the buck stud it's just sheetrock over where the door frame used to be. Is there a way to achieve this look with an existing door that was traditionally installed?
I will like to know what kind of router and bid did you use on the video please.ThNk you
Where is the shop for that hidden hinge jig?
It appears that there are no branches in South Korea.......
Never thought I'd say this about a hinge but that is one sexy hinge. It also must be a beast as far as strength.
Mr. Peters those hinges are excellent. where did you get the door????? and how much would a door like cost??
Are there any adjustments on the hinges? So if the door was binding, you can move the hinge outwards?
Nice work.
Great Jon, but no to cheap. I dont like the idea of mounting jig with nails but thats not so important detail. At 01:20 Im looking at the door stile - so its glued from pieces and then veneered?
Jon nice job and very informative.
I made a door by laminating 2 pieces of 3/4 plywood for a small entry to a basement but, on their website calculator 1 1/2 inch door thickness is not an option. Does this mean I am not able to use these on this door at its current thickness?
I love it ! Thank you
As always, great instruction, Jon. I presume these would only be used on solid core doors?
In the case of creating a jib door, are the door jambs installed before the dry wall?
Great job well done
Beautiful Job Jon!! What model hinges did you use?
Good job
Very good work technic
Can't imagine doing this by hand. My CNC takes less than a minute for 4 hinges though.
I do not understand the series of cutting the mortises. If I was doing it I would cut the shallow mortise and then put the spacer pins in and finish one set of hinges before moving on the do the door jam, I know it means moving the pins more but they are not difficult to take out or put in and doing it this way reduces the time needed to reposition the jig.
that means adjusting the depth of the router bit for the critical depth of the shallow mortise twice, so this is the easiest way possible
ahh - I had the same question, didn't think of that.
I suppose then if one had two routers both mortises could be routed with one set-up.
My thoughts exactely
I would prefer to see the screws longer it carry a lot of weight.
That plunge router has 3 plunge settings. If you set the 2 depths before hand it will save you time. You don't need 2 routers. The default about sos hinges is that they have no adjustment.
I started using the Tectus hinges and I will never go back. They have up and down, in and out adjustment. I like the video 👌🏽
Amazing work
Hello..
Not a carpenter but just thinking.. Is there a way to set the hinges so that the doors are centred? To offset the door from hinge side so its the same distance from other side as well?
Very nice job
good as always
Excellent job!
Jhon u HV done decent job ..
I prefer to do this with a plunge mortising kit and a drill. Safer, faster, more controlled.
Thanks folk for the video👍
nice work thanks for informational video
What’s the best wood to use for a solid door? I heard birch wood is no good for concealed hinges. Anyone? Thanks.
That’s good thank you
Hey great job there. But I used same bushing from porter cable recommended by soss and using a Bosch router the bushing doesn’t reach the screws for the deeper cut, any suggestion? Thanks
great vid - what is the reason for moving the jig to the door frame before cutting the deep mortise on the door?
The depth of the shallow mortise is crucial to the hinge sitting flush in the mortise. If he routed the deep mortise immediately after the shallow one, he would need to reset the router depth again for the shallow mortise on the door jamb. This would waste time because it takes some extra detail and caution to get the shallow mortise just right.
muy buen trabajo con bisagras en La puerta muy bueno
Vare nice work
I do Work in dubai for Alumoninmm glss and door
this is a good video, I have question for you, you door is 32 inches W. what is the opening on the door jamb for this hinges?
좋은 동영상입니다
감사합니다
excelentes videos, se aprende mucho. saludos.
Very well done job
Jagdish Sheth
iya
Hey Jon, do you recommend using 4 hinges for a 1-3/4" x 3' 0" x 7' 0" solid core commercial door?
Didn't notice here, with exposed hinges if you need to remove the door for some reason you just pull the pins. How would you do that with this style hinge?
Just unscrew the hinge from the door
As a decorator this is always my answer!
very good job bro
Thanks
A lot simpler than I was expecting and what a brilliant, clean look! Taking out so much material is it not weakening the door/jamb more than a traditional install, from a security point of view?
wood door doesnt seems to super security feature :D
I wish my carpenter was smart enough
The door need to have an angle cut to prevent hit the door whit the jamb or not?
Were I buy this jig?
Wonderful.
thanks very good
good wark
Does the wood harder to do this work too?
ok muy bien excelente vídeo ,,,,,, saludos ,, desde Mexico
Thanks Tomas
Ok muy bueno excelente tu trabajo
Buen trabajo 👍
I really enjoy your videos! I have gathered a ton of advice and tips from you to use in my own projects. Keep up the good work!
good
good!
Nice
I love work
why this is called an invisible hinge? because you still can see the hinge like normal hinges when you open the door, and if its mean closed door, the normal hinge is also cannot be seen
You game me a chuckle.....you must have been sleepy....you see the hinge pins on one side of the door. If you are in the room where it opens up you are going to see the hinges....
Is available in INDIA?