DIRECT SOURCE to Swi-Power Xijia s.click.aliexpress.com/e/_Acd6Hd OR Amazon amzn.to/44s5HLc *Support/Donate/Join* with KoFi - ko-fi.com/john4kiera OR bit.ly/2buyaCoffee all support helps. LiTime Mini Hammer LiFePO4 100ah shrsl.com/46ck0 or at amzn.to/3P5I1Zl GO SMALL WIND POWER - My Favorite REAL OUTPUT Small Wind turbines s.click.aliexpress.com/e/BztCS7I0 3/5&6 blade 12/24/48 volt PLUS, As Seen in video, the MINERALS SOURCED VIP brand 200A BMS s.click.aliexpress.com/e/_DmzSYQX
The fifteen hundred has been going strong for me 2 years straight. It's a lil beast! Bang for the buck you can't beat it. I use something with less idle consumption now but love it!
I can't believe how much of this I "stumbled onto by accident". I chose the 2000W 48V CNSWIPOWER Pure sine inverter to power my Refrigerator + Freezer units. I had a specific goal in mind, so I didn't go "too big" on the inverter so as to keep down the standby draw. I wish I had John's info before-hand, but I just got lucky I guess! My unit (at 48V, mind you...) draws only 600mA no-load. When I told this to the local guy I got my panels from (He buys in bulk and resells for a good price) - he did not believe it. Also, that very unit has been running NON-STOP for over a year now... so far so good. I only hear the fan kick on when a compressor starts, or if it gets really hot in my garage on a summer day. Another "funny" -- John uses copper pipe for battery bus bars on Duracell GC2 Golf Car batteries --- SO DID I !!
I really like and enjoy your videos, with a lot of knowledge and experience. I also like your paternal side, with your children, teaching them, in this case Kera, and passing them such great knowledge. That makes them more eager to learn, more curious to even experiment and come out with their own ideas. They have great attitudes, certainly are more intelligent than many kids that waste their time in useless things, and your children will succeed in life. Through the videos, you show and develop a good and healthy relationship, with confidence and trust between father and daughter. Gid bless you and your family.
I'm running the SWIpower 48v-3000w unit in the workshop, and it handles everything except the bigger air compressor. The miter saw dims the LED lights a bit on start up. So I'm thinking about the 6000w inverter to reduce the chances of inverter damage. I'm supplying the DC from 2 48v rack mount EG4 LiFePO4 100ah batteries with 100 amp bms, so I think that should cover the inrush requirements. Right now, without solar, I can run normal tool and lighting use for a week or two on 2-3 hours of generator runtime. A low frequency inverter might be better, but there's the cost and weight. EG4 has a 6000w low frequency all in one, but it's split phase, so back to only 3000w per 120v leg.
👍👌❤️🇨🇦, gr8 review thank you John, and just got off the phone with Power Queen today, and guess what, by the end of 2023 they will be coning out with their own inverter, sure hope you will be doing a review on that for us
Power queen is in talks with Xijia, I arranged that last November. They should be getting a end faceplate digital full screen 2023 version in golden rod color, based on the tough as nails SWI 2500 ( my hands down favorite mid size inverter ) s.click.aliexpress.com/e/_DBysWo3 but sadly their price will not get anywhere as low as SWI-Power on it. They got the Arvorex Tech Energy ( ATEM POWER ) dc to dc charger I sent them the contacts and info on at the same time, and released it branded in May this year, but $15 more.
Nice video, you have sold me on it, was thinking victron, but wow, sounds like a efficient reliable inverter, thanks for you & kera's efforts creating this content.
I saw another video with that orange inverter and it FAILED, twice! They sent that other reviewer a replacement, both had issues. So nice to find your video of these Xijia inverters.
We have been using Xijia made for over 10 years, never had a issue I couldn't fix in minutes. And they don't eat your battery for lunch like 90% of all the other brands.
Charge a capacitor to 6 to 7 volts DC, then you tap it (proper polarity) on the terminals of the battery cell to discharge it. Start with the cell drained to under 3 volts and if it is already dead and has NO volts then connect to a power supply set 1 amp at 5 volt supply, and while on that supply hit it with the capacitor a few times while keeping a meter on it to see progress of fail. If 3 to 5 times you get nothing, then its dead.
Hi John.just started your Chanel its great< had a quick question I bought 2 Power queen batteries and have them in parallel works great Thank you for your suggestion, I want to know how to charge them together at the same time, Thanks and keep up the great work
They will take charge as a pair, Just connect them as you have, and connect your solar or charger to them where your cables are grouped to go to a inverter or bus bar.
ill be buying one these in the future, i do have good inverters but a decent 12v inverter for when im out in the wilderness will be handy . im a worry wort, like a what if guy, the no neutral point makes sense in comparison to an alternator, here for a fixed location they wire the neutral to the earth (an MEN connection ) and put a ground rod in so the rcd kicks in fast enough to prevent an afib.
I recommend the 2500 model since its on a huge sale, s.click.aliexpress.com/e/_DBysWo3 since it can run on 2 - 100ah better than the 3000 which needs 250amp so it makes it much more portable. The 2500 I have tested to hit 3100 watts for over 20 seconds with no sag in voltage due to the fact it is has the input cabling of the 3000 but less demand on them. I am trying to get another one of them asap to show it.
I have the 3000/24v model, and this thing is a tank, it is also noisy and the fan comes on every 5 fricking minutes whether it is under load or not, makes for a good emergency unit when my Growatt took a dump, now running a Victron 24v 3000VA/2400 watt invertor and it runs great, and it should for what I paid for it. I bought one of the SWI's on your recommendation and very glad I did, it is obvious this thing is built with quality components.
Looks like a beast, I need to run a submersible well pump motor with a 1/2 hp, 120 vac motor. It has a high start load of about 40 amps, then runs at 8 amps. Will this beast start up a motor like this? I have not yet found an inverter that will, as they seem to have a cutoff and do not take the surge. I run this pump now with a 2.5 Onan generator, but would like to go battery/ inverter/ solar. What do you think?
The one I put the link to, the 6000 it will run a 1 horse 120 volt Grundfos deep well submersible pump from a 110 foot deep well, and its been on it over 2 years. So I would say yes. But you can't be like most folks and under-battery it! This will put out a start of 6 seconds of 50 amps, 2 seconds 60 amps and run continuous at over 35 amps without even breaking a sweat. But you got to have the battery to do it. 400ah is the starting point, 800ah is the best with a minimum of 900 watts solar to assure all night pumping capability.
Thanks, that is the info for which I am looking. Specs on my 1/2 hp are 47 amps for startup, but do not know duration. Likely less that 1 hp. Runs on 8-9 amps, so just need high startup correct, without a automatic cutoff!@@JOHNDANIEL1
Yes, but this gun really gets the job done. So many total fraud rated inverters on the market, only the SWI has the BALLS to pull the trigger on them big guns.
Anyway you could tell me the exact height of the 2000w or 3000w version of this inverter? I need it to fit in my diy solar generator case since the one i have jn there is rated for 2000w but does 1400w before it shutdown.
They have a huge sale on all of them. I recommend the 2500 model, LED not LCD, s.click.aliexpress.com/e/_DBysWo3 to anyone building like your planning since it can run on 2 - 100ah better than the 3000. The 3000 needs 250amp ability minimum. But the 3000 is ( including lugs and mounting flange ) 18-7/8" long, 6-3/4" wide & 3-1/2 high. The 2500 watt model is about 2" shorter, the 2000 model is about 3-1/2" shorter. Why the LED over the LCD model, you can relocate the LED meters out of the inverter body with some skills to a outer case like your discussing.
O 6000 é idêntico ao 3200 em todos os aspectos, exceto que tem 2X mais comprimento, com mais 4 capacitores muito grandes e uma placa PCB principal revestida de cobre com 0,65 mm de espessura. Você pode ver o vídeo da minha abertura do 3200 com o 3000 também para ter uma ideia do modelo 6000.
@johndaniel1 Do any of their inverters output 30A @ 120V AC? I'm looking to directly connect my RV to a single outlet and no where can I find the terminal block specs. Thanks for all the videos!
The screw terminals are good for 25 amps but your 30 amp RV system contains 7 to 9 amps for the AC to DC converter. If your going to be on battery you will not be using it. So your real demand on your system won't exceed in normal conditions anything over 20 to 25 amps. The 6000 would easily handle your average RV with plenty of power. And you can run individual items like a microwave on a some of the plugs. Most 4000 watt Power Stations with a 30 amp RV plug cost over $2500 are only good for 20 amps max output as example from their inverters.
@@JOHNDANIEL1 I tested the setup with the inverter and it wasn't able to handle the 2nd AC startup load. It seems like it almost was able to handle it, but it couldn't. Just kept cycling and hitting the wall. Picked up a low freq 4000W inverter and it handled the load with ease. Thanks for all the great content you've posted over the years!
So that thing at peak power pushes 500amps!? I couldn't trust 6000watts even at 48v. Would be great as an occasional remote work inverter, but...I am impressed by your work anyway and am looking into the 3200w 48amp model.
Install a RV box with 10 awg cables to it from the inverter. I have one in a 34 foot RV working fine. But on mine I straight wired it and used a ABC switch on it.
I’ve got this model, the only thing is when I turn on two desktop PCs it cuts out and gives me error code 6. The manual doesnt say what error code 6 is. Restarting the inverter and then it’s fine again. Any clues anyone?
I'm trying to build mine I only got a few solar generatos, that I use for no. then I bought a few fosfate batteries ( 4800ah) but I was thinking I need a huge bank and with is gonna cost me. @@JOHNDANIEL1
I enjoy the video, but it would be better to just put down the manufacturer for their "crappy parts"... every country has some bad apples that make crappy parts. Good quality, like... Power Queen's ... has their provider which is Shenzhen Lizu Time Technology (located in Kowloon), and they make quality batteries... and the Swipower Inverters also have a good reputation too,
4 with 1000 watts solar per hour will give you about 15 minutes of similar full load run time. It grows on a upward curve based on lead acid gravity rating, so 6 would gain its ability by supporting the voltage more. Example: If your needing a 6000 watt inverter, you plan to see its peak up to 1 hour per day, ( big heaters or stove) 25 to 30% the rest of the day. A proper system would be 3200 watts solar, @5.7 hours a day full charging and 10 of the 235AH Rolls Surettes 1175AH @12v to assure you have a 15% extra capacity coverage.
O inversor pode parecer simples e sem graça, mas é de uma empresa que está no mercado há 20 anos, preocupando-se apenas com a qualidade de seu produto. E fazem modelos para cada necessidade, país e tensões.
Você deseja uma solução se não tiver bateria suficiente, uma transferência para a concessionária do inversor e puder retornar ao inversor 3.000 watts que você tem quando a tensão da bateria voltar ao bom? Use a transferência MOES, s.click.aliexpress.com/e/_DCwBqiP conecte à tomada de 220 V em casa, conecte ao inversor, conecte à bateria. Quando a tensão cai para o nível baixo que você definiu, o bypass de energia e o inversor aguardam enquanto a concessionária é ligada até a carga da bateria acima do que você escolher. Perfeito para o seu plano.
NO, but the biggest concern would have is WHY! If your plans to use a inverter to run a 3500 watt plus drier, your really just looking for a way to waste tons of money. Get a gas drier, they create less pollution and waste plus can be ran on a 800 watt inverter. Total savings over 800%
I don't believe you could start up a gas dryer with an 800W inverter.....these dryers typically use induction motors with much higher starting surge power than running power...if you could demonstrate an 800W inverter starting up a gas dryer that would be very impressive! @@JOHNDANIEL1
You bet. And SWI Xijia just sent me their page on Amazon also, and she lowered the 6000 price there so I put the Amazon source under the video also. People getting these can run RV totally on 600+ ah of lithium, and the LiTime mini, 6 of them is not the limit if you cable all with 6 awg to the mains.
They run 1 to 3% depending on how hot they get when running. Also like all inverters, high powered radio signals in the MW bands can cause some temporary THD increase.
The closer you get to peak the less efficient any of them are. The CSL rating I explain in a video is the Constant Service Load rating. The SWI Power ( for the cost of the item ) is about the highest CSL you can get for the money today. 23 years dealing with inverters, hundreds of brands, builds, styles and options I have found the inverters ability in peak efficiency is the only way to pick one. The 6000 has about 3900 watts where its voltage sag/heat management/DC heat on components is stable. Over that efficiency starts to drop, fan stays on full time, and heat becomes saturated. It still will run to and over the makers claim, just not to your benefit. Other brands are horrible in CSL, so I stick with Swi Power.
I just received my 6000 watt pure sine wave inverter, and the shipping boxes (3) were damaged. There was a broke off housing screw and a loose screw in the bag. Unit shows the input voltage but no output voltage. No ac power anywhere. I am not going to open it up. I purchased from Amazon due to the ease of returns. Just wanted to share this with you.
We too are getting unheard of amounts of shipping damage. If the inverter does not power up, I used the remote to get one on from another brand then the switch worked like normal. A screw falling out is not unheard of, House Apes now are all they can find to work in warehouses. I have had a few like that. But if its tweaked and bad get it swapped ASAP!
@@JOHNDANIEL1 I have started the return process. I used Amazon due to the ease of returns ,and it paid off this time. I will try again. One question. What are the two extra terminals for on the input side ?
@@edwardutter6975 Increase amp capacity. They join inside the inverter, but 2 common wiring or cables and terminals would not support the near 500 amps this thing can process.
DIRECT SOURCE to Swi-Power Xijia s.click.aliexpress.com/e/_Acd6Hd OR Amazon amzn.to/44s5HLc *Support/Donate/Join* with KoFi - ko-fi.com/john4kiera OR bit.ly/2buyaCoffee all support helps. LiTime Mini Hammer LiFePO4 100ah shrsl.com/46ck0 or at amzn.to/3P5I1Zl GO SMALL WIND POWER - My Favorite REAL OUTPUT Small Wind turbines s.click.aliexpress.com/e/BztCS7I0 3/5&6 blade 12/24/48 volt PLUS, As Seen in video, the MINERALS SOURCED VIP brand 200A BMS s.click.aliexpress.com/e/_DmzSYQX
The fifteen hundred has been going strong for me 2 years straight. It's a lil beast! Bang for the buck you can't beat it. I use something with less idle consumption now but love it!
I can't believe how much of this I "stumbled onto by accident". I chose the 2000W 48V CNSWIPOWER Pure sine inverter to power my Refrigerator + Freezer units. I had a specific goal in mind, so I didn't go "too big" on the inverter so as to keep down the standby draw. I wish I had John's info before-hand, but I just got lucky I guess! My unit (at 48V, mind you...) draws only 600mA no-load. When I told this to the local guy I got my panels from (He buys in bulk and resells for a good price) - he did not believe it. Also, that very unit has been running NON-STOP for over a year now... so far so good. I only hear the fan kick on when a compressor starts, or if it gets really hot in my garage on a summer day. Another "funny" -- John uses copper pipe for battery bus bars on Duracell GC2 Golf Car batteries --- SO DID I !!
I really like and enjoy your videos, with a lot of knowledge and experience. I also like your paternal side, with your children, teaching them, in this case Kera, and passing them such great knowledge. That makes them more eager to learn, more curious to even experiment and come out with their own ideas. They have great attitudes, certainly are more intelligent than many kids that waste their time in useless things, and your children will succeed in life. Through the videos, you show and develop a good and healthy relationship, with confidence and trust between father and daughter. Gid bless you and your family.
I'm running the SWIpower 48v-3000w unit in the workshop, and it handles everything except the bigger air compressor. The miter saw dims the LED lights a bit on start up. So I'm thinking about the 6000w inverter to reduce the chances of inverter damage. I'm supplying the DC from 2 48v rack mount EG4 LiFePO4 100ah batteries with 100 amp bms, so I think that should cover the inrush requirements. Right now, without solar, I can run normal tool and lighting use for a week or two on 2-3 hours of generator runtime.
A low frequency inverter might be better, but there's the cost and weight. EG4 has a 6000w low frequency all in one, but it's split phase, so back to only 3000w per 120v leg.
👍👌❤️🇨🇦, gr8 review thank you John, and just got off the phone with Power Queen today, and guess what, by the end of 2023 they will be coning out with their own inverter, sure hope you will be doing a review on that for us
Power queen is in talks with Xijia, I arranged that last November. They should be getting a end faceplate digital full screen 2023 version in golden rod color, based on the tough as nails SWI 2500 ( my hands down favorite mid size inverter ) s.click.aliexpress.com/e/_DBysWo3 but sadly their price will not get anywhere as low as SWI-Power on it. They got the Arvorex Tech Energy ( ATEM POWER ) dc to dc charger I sent them the contacts and info on at the same time, and released it branded in May this year, but $15 more.
Thanks John
Nice video, you have sold me on it, was thinking victron, but wow, sounds like a efficient reliable inverter, thanks for you & kera's efforts creating this content.
You bet
I saw another video with that orange inverter and it FAILED, twice! They sent that other reviewer a replacement, both had issues. So nice to find your video of these Xijia inverters.
We have been using Xijia made for over 10 years, never had a issue I couldn't fix in minutes. And they don't eat your battery for lunch like 90% of all the other brands.
You mention match cycling two inverters, I haven't found how to fo that.
Incredible video, thank you for showing us in detail how such a team works.👍
Great Job As Usual
Thanks very much for the great videos! Would you mind sharing how you used shock treatment to revive that weak lifepo4 cell?
Charge a capacitor to 6 to 7 volts DC, then you tap it (proper polarity) on the terminals of the battery cell to discharge it. Start with the cell drained to under 3 volts and if it is already dead and has NO volts then connect to a power supply set 1 amp at 5 volt supply, and while on that supply hit it with the capacitor a few times while keeping a meter on it to see progress of fail. If 3 to 5 times you get nothing, then its dead.
@@JOHNDANIEL1 Thank you so much! I will give it a try. (I have some self-discharging 26650 LFP cells that I'm trying to revive. )
Hi John.just started your Chanel its great< had a quick question I bought 2 Power queen batteries and have them in parallel works great Thank you for your suggestion, I want to know how to charge them together at the same time, Thanks and keep up the great work
They will take charge as a pair, Just connect them as you have, and connect your solar or charger to them where your cables are grouped to go to a inverter or bus bar.
I like the new intro and ending...She is doing all that...right? 😎
ill be buying one these in the future, i do have good inverters but a decent 12v inverter for when im out in the wilderness will be handy .
im a worry wort, like a what if guy, the no neutral point makes sense in comparison to an alternator, here for a fixed location they wire the neutral to the earth (an MEN connection ) and put a ground rod in so the rcd kicks in fast enough to prevent an afib.
I recommend the 2500 model since its on a huge sale, s.click.aliexpress.com/e/_DBysWo3 since it can run on 2 - 100ah better than the 3000 which needs 250amp so it makes it much more portable. The 2500 I have tested to hit 3100 watts for over 20 seconds with no sag in voltage due to the fact it is has the input cabling of the 3000 but less demand on them. I am trying to get another one of them asap to show it.
I have the 3000/24v model, and this thing is a tank, it is also noisy and the fan comes on every 5 fricking minutes whether it is under load or not, makes for a good emergency unit when my Growatt took a dump, now running a Victron 24v 3000VA/2400 watt invertor and it runs great, and it should for what I paid for it. I bought one of the SWI's on your recommendation and very glad I did, it is obvious this thing is built with quality components.
When your fans cycle too much try blasting it out with some air to make sure your not insulated with dust.
Looks like a beast, I need to run a submersible well pump motor with a 1/2 hp, 120 vac motor. It has a high start load of about 40 amps, then runs at 8 amps. Will this beast start up a motor like this? I have not yet found an inverter that will, as they seem to have a cutoff and do not take the surge. I run this pump now with a 2.5 Onan generator, but would like to go battery/ inverter/ solar.
What do you think?
The one I put the link to, the 6000 it will run a 1 horse 120 volt Grundfos deep well submersible pump from a 110 foot deep well, and its been on it over 2 years. So I would say yes. But you can't be like most folks and under-battery it! This will put out a start of 6 seconds of 50 amps, 2 seconds 60 amps and run continuous at over 35 amps without even breaking a sweat. But you got to have the battery to do it. 400ah is the starting point, 800ah is the best with a minimum of 900 watts solar to assure all night pumping capability.
Thanks, that is the info for which I am looking. Specs on my 1/2 hp are 47 amps for startup, but do not know duration. Likely less that 1 hp. Runs on 8-9 amps, so just need high startup correct, without a automatic cutoff!@@JOHNDANIEL1
Breakin Out Some Bigger Guns-eh? 🤣🤣😁😎
Yes, but this gun really gets the job done. So many total fraud rated inverters on the market, only the SWI has the BALLS to pull the trigger on them big guns.
I need one of them lol. That appears to be a beast of an inverter. Thanks for the video!
..haha, menn this is thirth video i watch..hilaric..those tests, .im loving it..keeep uo this goood work sir&lady~♧♡♧~
Anyway you could tell me the exact height of the 2000w or 3000w version of this inverter? I need it to fit in my diy solar generator case since the one i have jn there is rated for 2000w but does 1400w before it shutdown.
They have a huge sale on all of them. I recommend the 2500 model, LED not LCD, s.click.aliexpress.com/e/_DBysWo3 to anyone building like your planning since it can run on 2 - 100ah better than the 3000. The 3000 needs 250amp ability minimum. But the 3000 is ( including lugs and mounting flange ) 18-7/8" long, 6-3/4" wide & 3-1/2 high. The 2500 watt model is about 2" shorter, the 2000 model is about 3-1/2" shorter.
Why the LED over the LCD model, you can relocate the LED meters out of the inverter body with some skills to a outer case like your discussing.
Procurei no seu canal vídeo abrindo o inversor 6000W Swipower não tem , quando você vai abri ele , estou curioso pra ele por dentro
O 6000 é idêntico ao 3200 em todos os aspectos, exceto que tem 2X mais comprimento, com mais 4 capacitores muito grandes e uma placa PCB principal revestida de cobre com 0,65 mm de espessura. Você pode ver o vídeo da minha abertura do 3200 com o 3000 também para ter uma ideia do modelo 6000.
@@JOHNDANIEL1 eu assisti esses vídeos seu , agradeço por compartilhar,
@johndaniel1 Do any of their inverters output 30A @ 120V AC? I'm looking to directly connect my RV to a single outlet and no where can I find the terminal block specs. Thanks for all the videos!
The screw terminals are good for 25 amps but your 30 amp RV system contains 7 to 9 amps for the AC to DC converter. If your going to be on battery you will not be using it. So your real demand on your system won't exceed in normal conditions anything over 20 to 25 amps. The 6000 would easily handle your average RV with plenty of power. And you can run individual items like a microwave on a some of the plugs. Most 4000 watt Power Stations with a 30 amp RV plug cost over $2500 are only good for 20 amps max output as example from their inverters.
@@JOHNDANIEL1 I tested the setup with the inverter and it wasn't able to handle the 2nd AC startup load. It seems like it almost was able to handle it, but it couldn't. Just kept cycling and hitting the wall. Picked up a low freq 4000W inverter and it handled the load with ease. Thanks for all the great content you've posted over the years!
So that thing at peak power pushes 500amps!? I couldn't trust 6000watts even at 48v.
Would be great as an occasional remote work inverter, but...I am impressed by your work anyway and am looking into the 3200w 48amp model.
Their 48 volt model is also on that same source link under the video. Very stable and low waste on the power.
А что под крышкой не показали
A question about the 6000 watt inverter. The screw terminals arent the best place for me to direct a wire from and to a 30 amp rv plug ?
Install a RV box with 10 awg cables to it from the inverter. I have one in a 34 foot RV working fine. But on mine I straight wired it and used a ABC switch on it.
I’ve got this model, the only thing is when I turn on two desktop PCs it cuts out and gives me error code 6. The manual doesnt say what error code 6 is. Restarting the inverter and then it’s fine again. Any clues anyone?
Not sure what error code 6 is on the 6000 watt model like mine, it has no code option or diagnostic.
you’re literally my comfort person i love you kislux !
So question, would you rather have a led acid bank or lithium fosfate bank?
Both if I they made a 500 amp VSR to use on mixing them. But I am using a pair of 140 amp models, so I plan and need a 3rd VSR.
I'm trying to build mine I only got a few solar generatos, that I use for no. then I bought a few fosfate batteries ( 4800ah) but I was thinking I need a huge bank and with is gonna cost me. @@JOHNDANIEL1
I enjoy the video, but it would be better to just put down the manufacturer for their "crappy parts"... every country has some bad apples that make crappy parts.
Good quality, like... Power Queen's ... has their provider which is Shenzhen Lizu Time Technology (located in Kowloon), and they make quality batteries... and the Swipower Inverters also have a good reputation too,
john how many 235 lead acid batteries and solar watts would you need to run that test?
4 with 1000 watts solar per hour will give you about 15 minutes of similar full load run time. It grows on a upward curve based on lead acid gravity rating, so 6 would gain its ability by supporting the voltage more. Example: If your needing a 6000 watt inverter, you plan to see its peak up to 1 hour per day, ( big heaters or stove) 25 to 30% the rest of the day. A proper system would be 3200 watts solar, @5.7 hours a day full charging and 10 of the 235AH Rolls Surettes 1175AH @12v to assure you have a 15% extra capacity coverage.
Does this inverter also have the built
In soft start chip like the others?
@JOHNDANIEL1 I would like to know this too. Built in soft start is a huge value add.
@@NoSpamForYou Did you ever find out if this inverter has the soft start ?
Muito bom o video ,gostei bastante da explicação, abraço tudo de bom,
O inversor pode parecer simples e sem graça, mas é de uma empresa que está no mercado há 20 anos, preocupando-se apenas com a qualidade de seu produto. E fazem modelos para cada necessidade, país e tensões.
@@JOHNDANIEL1 eu estou usando a quase 1 ano no meu off grid, gostei bastante,
@@JOHNDANIEL1 th-cam.com/video/F_TDtIMYJH4/w-d-xo.html
Você criou sua própria liberdade
Inscrito para acompanhar seu progresso!
Você deseja uma solução se não tiver bateria suficiente, uma transferência para a concessionária do inversor e puder retornar ao inversor 3.000 watts que você tem quando a tensão da bateria voltar ao bom? Use a transferência MOES, s.click.aliexpress.com/e/_DCwBqiP conecte à tomada de 220 V em casa, conecte ao inversor, conecte à bateria. Quando a tensão cai para o nível baixo que você definiu, o bypass de energia e o inversor aguardam enquanto a concessionária é ligada até a carga da bateria acima do que você escolher.
Perfeito para o seu plano.
You can't run a 240V dryer with two of them, right?
NO, but the biggest concern would have is WHY! If your plans to use a inverter to run a 3500 watt plus drier, your really just looking for a way to waste tons of money. Get a gas drier, they create less pollution and waste plus can be ran on a 800 watt inverter. Total savings over 800%
I don't believe you could start up a gas dryer with an 800W inverter.....these dryers typically use induction motors with much higher starting surge power than running power...if you could demonstrate an 800W inverter starting up a gas dryer that would be very impressive! @@JOHNDANIEL1
Cool Thanks👍☮️
You bet. And SWI Xijia just sent me their page on Amazon also, and she lowered the 6000 price there so I put the Amazon source under the video also. People getting these can run RV totally on 600+ ah of lithium, and the LiTime mini, 6 of them is not the limit if you cable all with 6 awg to the mains.
have u measured THD ?
They run 1 to 3% depending on how hot they get when running. Also like all inverters, high powered radio signals in the MW bands can cause some temporary THD increase.
Jamaican mon seh "Dat ting is a rass of an inverter."
And it's HEAVY like Puerto Rican momma
Dont understand why they say these inverters are 90 percent plus when it take 6k watts to make 5k thats 83 percent
The closer you get to peak the less efficient any of them are. The CSL rating I explain in a video is the Constant Service Load rating. The SWI Power ( for the cost of the item ) is about the highest CSL you can get for the money today.
23 years dealing with inverters, hundreds of brands, builds, styles and options I have found the inverters ability in peak efficiency is the only way to pick one. The 6000 has about 3900 watts where its voltage sag/heat management/DC heat on components is stable. Over that efficiency starts to drop, fan stays on full time, and heat becomes saturated. It still will run to and over the makers claim, just not to your benefit. Other brands are horrible in CSL, so I stick with Swi Power.
❤❤😊😊
👍🍟📺👀
I just received my 6000 watt pure sine wave inverter, and the shipping boxes (3) were damaged. There was a broke off housing screw and a loose screw in the bag. Unit shows the input voltage but no output voltage. No ac power anywhere. I am not going to open it up. I purchased from Amazon due to the ease of returns. Just wanted to share this with you.
We too are getting unheard of amounts of shipping damage. If the inverter does not power up, I used the remote to get one on from another brand then the switch worked like normal. A screw falling out is not unheard of, House Apes now are all they can find to work in warehouses. I have had a few like that. But if its tweaked and bad get it swapped ASAP!
@@JOHNDANIEL1 I have started the return process. I used Amazon due to the ease of returns ,and it paid off this time. I will try again. One question. What are the two extra terminals for on the input side ?
@@edwardutter6975 Increase amp capacity. They join inside the inverter, but 2 common wiring or cables and terminals would not support the near 500 amps this thing can process.
@@JOHNDANIEL1 Thank you for replying,and That is good to know.