Like this video? Be sure to watch my new DT Cricut video for 2023: th-cam.com/video/MTLGBsivUhw/w-d-xo.html 🌸 Want to learn more Cricut tips? Join me for the 2023 Cricut Craftfest Feb 6th-10th for FREE! Get your ticket here: bit.ly/3XzJsQx ⭐ DOWNLOAD my free cut files used in this video here: bit.ly/3sKF43k POPULAR: The Best Dollar Tree Cricut Blanks: th-cam.com/video/g1ABt8yB9iw/w-d-xo.html Check out my full Cricut Playlist: th-cam.com/play/PLN5vNkJRfhkMW-be9DGNCsP2MMkxl2Aw-.html 📧Sign up for my emails here: bit.ly/WWInsiders ❓Need help downloading, watch this: th-cam.com/video/TQI_YRlfw40/w-d-xo.html 💲Purchase a commercial license for my free files here: bit.ly/3BYbyum My Amazon favorites for home and DIY: www.amazon.com/shop/whiskeywhit
Whit, HELP! I've never used a cutting machine, I purchased a manual dye machine and a ton of dyes, I tried it and hated it! Then around seven mns ago I purchased the Cricut Maker 3 maybe it's too much of a machine for a bigginer? It took me like four-five mns to take it out of the box! I'm a visual learner so I've watched tons of Cricut videos, I tried the couple beginner projects they went well... I was really good at making flyers, signs, websites so the Cricut design center I've found easy to use, the one problem I'm having I figuring out size and thickness of the font. I made my first sign "Believe In The Magic" it was a 11x24 wood sign that I purchased on sale at Michael's, then I put the transfer tape on, removed the decal and went to put it on my sign and I could not get the decal off the transfer tape! I couldn't understand how you and other youtubers made it look so easy! I used the tools I purchased for the Cricut and took each letter off one at a time inch by inch, it was so difficult I just could not believe how hard it was! About two hours of slowly removing the decal and placing it on my sign I noticed the translucent water marking on the transfer tape and saw the words "Extra Strong Transfer Tape! I went and looked at the box and sure enough that's what it said! In all the Cricut videos I've watched (mainly decals for signs or hard flat smoth surfaces, I've never heard anyone mention different transfer tapes I just assumed they were all the same! I'm not even sure what you would use that extra strong transfer tape for! I could hardly get the decals off by hand! So that was my first project, the sign looks amazing for what I went through making it, although two or three letters did rip so I had to piece them together the best I could! Second project, what I'm currently working on it a huge built-in spice rack with three different sizes of spice jars, I did search the design space for an already completed project where I would just have to size it but was unable to find one that were word decals the only one's I could find were a sticker with the spice name written on to it and I just wanted the spice names... OK, sorry for the lengthy post, there are things I have learnt from you tips, because you talk about those things like in this video using the hair dryer I wonder if that would have helped me with that first project? Anyway, I cut and pasted most of my spice names from a list I had been collecting, I chose a font, tried to figure out how large/small to make it and then cut it, I then went to weed it and not understanding font size when I went to weed it I lost all the i's all the dots for the i's I lost parts of M's and N's etc. You get what I'm saying, the size of the font was way to thin and elongated, as I tried to weed it I realized it wasn't going to work as word decals but as word stencils! I then tried one spice jar and hated it... so, back to the drawing board, I changed the font to one that wasnt so delicate, adjusted the size, I will say that I was working on 4 lists of about 8 words, I could not figure out how to separate the individual words when I tried it split it up in columns so I only had a list of the first letter of each word! Omg! I'm sorry this is so long and I really hope you or someone else sees this and can advise me... I adjusted the size of the entire list to fit each word into a 2"×1.5" area, cut it and weeded it, was moving along OK, but I'm just not crazy about the size of the words I think they are too big and in some cases only one word instead of two fit (Greek Spice to just Greek) my OCD has now kicked in and I can't look at all my spices names shortened! Like Everything Bagel Spice to EVRYTHNG.... Nope I can't do it! So, after that long story! In short, can you suggest or recommend anything? What am I doing wrong? Should I only work with one word at a time? Sizing them all individually? Will that mean that every name will be a different size? How do I do names like DILL then 5-CHINESE SPICE OR GARLIC AND RED PEPPER ? Do I do them all one size the smallest that will fit two lines of words for the longer names? What about the different size bottles I've used the smallest bottle that is round except for the area to put a word which is 2"×1.5" the second size is exactly the same jar but bigger its flat area it 3"×2.5" then the third bottle is tall and square it's 2.5"×6" tall... can the names be a different size for each bottle or will that look weird? I'll use the same font for all of them but I just wonder if each bottle should have its own size that fits the same way on each bottle? Also, can you remove permanent vinyl off of glass? I already made six bottles but I just don't like that they are not the full names! Any help I can get would be amazing!
@Jenna Bella Expectation Vs Reality I just read your comment to Whit.. the only time that you may need the extra strong transfer tape is for glitter vinyl and from what I was told the Cricut brand extra strong is sometimes still to strong. As for as signs, if you painted(or stained) them yourself, stick the transfer tape on something else first to get some of stickiness off. That way it won't pull the paint off. I hope I helped you some 😊
I love how you craft things that you will actually use in your home and not just video random things that'll probably get thrown in a closet afterwards. Your authenticity and love for what you do is admirable!
Oh gosh thank you! ❤️ That is something I say all the time when I'm concepting videos so I really appreciate that it shines through. Have an AWESOME day, friend!
Love love love that you answered a question you didn’t even know I was thinking🤣wow mouthful. I love the slice to get rid of things or move things. I love the way you pick and space fonts.
Love the porch sign! Any chance you can point me in the direction of a video that shows how you use the slice function for the stencil to break it down to printable pieces?
Thank you Whitney for explaining how to use a cricut. I hope to get one soon and will refer back to your videos for tutorials. You do a wonderful job teaching others. And I love all of these projects. ♥️👍
Thanks for posting how to make the porch sign. I am getting ready to make one the same size as yours with both sides stenciled for St. Patrick’s Day/Easter. I now know to what to use to seal it.
I got a Cricut Joy for Christmas. So much I have to learn. You make it look easy. Right trying to learn nest vinyls to use, paper etc. Definitely see I need to get my laptop fixed.
I have been wanting to do a porch sign but was not sure how to do it. I have the bigger mat also, so now this is going to be my next project. I’m glad you show how to decor our homes with your projects it is stuff that I would definitely put in my house. I bought a new house and farm house is my Devore so you have so many ideas. Love love your videos…. Thank you.
Brenda, that's wonderful! Congrats on your new house, we're moving into a new home later this summer, so I'll have plenty more projects coming up. - THANK YOU for sharing this. I'm so happy to hear that you enjoyed it!
Thank you for sharing your ideas, I'm new to the Cricut fam watching your video and how easy you make it look im not so worried any more I know I'm going to have tons of fun I'm going to continue to follow you and I know I'm going to learn so much more from you, thanks a bunch and Happy Crafting 😁
I really love watching you design your Cricut projects. Your ideas are terrific and so professional! Sadly, I have a Silhouette instead of a Cricut. I can do pretty much the same things you do but the terms are different from Cricut. I'm gonna be a Debbie Downer: I've never been very crazy about Cricut's vinyl products, including their transfer tape. I especially like your porch sign!!
Omg Whitney, you are a pro at using your Cricut and making all those beautiful projects. I have only done two projects on my machine, I am terrified of the Cricut design space, there are so many things you have to do in there. Thank you for taking your time and showing us how to make this projects, it helps so much. I truly enjoy your channel. Thank you!!!
HI Felicia! I understand it can be intimidating, but you got this. Practice and time will totally help! Here's a full video on design space that should help: th-cam.com/video/7ouOLYTC2YM/w-d-xo.html
I love your channel. Thank you for sharing all of your tips and tricks for Cricut. I have seen people using armor etch and then they add something to the top of it to color the etched areas. Do you know anything about this process? If so, can you do a tutorial of it? ❤️❤️
Absolutely love how you did both the Wifi sign as well as the beer can glasses. Thank you so much for sharing! I've already hit subscribe and look forward to more videos!
Your explanation and crafts are always on point! I have had my silhouette for years now, and there’s so many things that I still don’t know how to do. 😂For Christmas two years ago, my husband brought me a Cricut Joy, and I like using it for my smallest projects, but your instructional videos make me want to cross over completely to the Cricut family 🤣. 👍🏽👍🏽
I got the Cricut maker 3 the day they came out in June for an early birthday present. For Christmas I received some of the blades such as the embosser and the knife. Would love some tips and tricks on how to use these. I have “tried” to watch other videos from other creators but confused me so much that I haven’t even gotten the blades out of the packaging. Love love love how you explain and show us instead of reading from a book or index cards.
HI Vanessa! I have a video with felt coming up so that will be fun to share. I'll also do something with wood and the knife blade. I recently used it with chipboard for my son's birthday in this video - it will show you the functionality and how to use it: th-cam.com/video/m0RMLOM2hbs/w-d-xo.html This link will jump you right to that specific project :)
Thank you for the very creative video Whitney😊 I always have trouble with the measurements not being accurate…I’m going to use your idea (using the squares/circles as my base)from now on…thank you, thank you 🙏 ❤️😊
Hey Whitney !! Great video - thanks for all the details - such a huge help! One question, how do you get the vinyl to stick to stain? I have the hardest time with that - any tricks up your sleeve?
Hi Brenda - I'm thinking your transfer tape is too sticky. You need something with a lower tack so it releases your vinyl. You also want to peel it back at an angle and take your time. You may have to push some of it back as you peel it so it doesn't peel up with the transfer tape. I hope that helps!
Hi Amy - I use permanent vinyl for etching so it really sticks. I also use that for stenciling typically. Here I used stencil vinyl. I hope that helps!
I love all these Cricut DIYs! I'm watching your videos and as soon as I can get to it I'm going to make a few things with my Cricut! Theast DIY you did that huge porch sign you should put something on the other side for summer or fall. 🙂 Thanks so much for taking the time to teach how you do your DIYs!! 😀♥️
Yes! That is one huge sign! In fact, I picked up a damaged 1x10, 8 ft long at Home Depot in their discounted area, some time ago, so i am ready to make that sign! Cute saying, too.
Beautiful pieces. I have a question though. What is the difference with using stencil paper or using the vinyl paper and making it a stencil? Thank you in advance
Hi Judy - you can, however I still worry about the high heat and pressure on the vinyl. I err on the side of caution and hand wash anything with vinyl on it.
Marvelous video! You seem so at ease and comfortable using your Cricut! I have an Explore Air 2, and do pretty good getting what I want. I have difficulty getting my transfer tape off. Thanks for the tips you shared! Please keep doing more of these.
Also Whit,I wouid like to see a little more content with the cricut on the slicing, and how you are adding a shape to make projects,I just can't get that stuff for some reason,I think my brain just is like..... SQUIRREL 🐿️🤣😅 and then I become frustrated and STOP. Thanks so much again,for just being amazing I have the Cricut explore air 2,
You do such an amazing job on the Cricut videos. I have learned a lot from watching your videos. Not to mention how cute your diys turned out! Awesome job friend! 🥰🤗
Thanks for another great cricut video Whitney. I've recently upgraded to the explore air 2 from the joy, and I'm loving all the extra things I can do. But I'm still very much a beginner. Always learn something new from your cricut videos x
I love you projects you do! I’ve saved a bunch of them while I look for the supplies to do them. My problems a lot of time is once I’ve gotten the supplies I can never figure out which person’s specific video it is I wanna do! I love how you show the finished projects at the beginning of this video! Thank you so much for sharing!
I’m going to have to do a shorter sign. I’m only 5’2”. 😂😂😂 I definitely liked the milk jug you did for your friend. I found it on Hobby Lobby website. I’m going to see if they have it in the store. I’m going to make it for my house.
Thank you for sharing. Loved the hacks. I hope you get warm soon as I am below Illinois. But I do love all seasons. I'm just ready for it to be warmer ☺️
Did you know you can dye your etching? Using rit dye and soaking the etched piece in a bowl with water and dye will dye the etching and wash off from the smooth surface. I seen a video on it but can't remember the creator.
Love the sign! Will be making one this weekend - with a little twist - I have a ton of free wood - while I have some long enough pieces - they are not wide enough. First step - stain everything. Second step cut cross pieces for the back to keep the 3 long pieces together to make the right width. I did one at Christmas attaching wood letters - but now I have my Cricut Joy I'm following your lead and stenciling! Thank you for the tutorial! Blessings!
Oh Hello!! Whitney, You are the best educator when it comes to Cricut. I have been using mine for years and years, but I always seem to learn something new from you. Thank you for taking the time to give all the details to making these projects. I love them all, but my favorites are the porch sign and the wifi sign.
This was an amazing video! I learned SO much and I'm so inspired to do some DIY'ing now!!!! Thank you so much for the cut files too! I def need that tile file!!!! Thank you, Whitney!
I just got a Cricut Joy and really appreciate learning new tricks and how to make things. Have you tried using the Dollar Tree permanent vinyl with your Cricut Joy? I'm having trouble figuring out what cut settings to use.
Whitney, Thank you SO MUCH for the hack on releasing the smart vinyl...I was getting very frustrated and fairly new to my JOY machine. So now, with your hack ...it will be much more enjoyable to work on projects! ❤❤❤
Great projects Whitney! ❣️ I always enjoy your videos! I don't think I actually voted when you asked about the type of videos we prefer. And I realize you create a lot of Cricut videos and I watch a majority of them. However, I don't actually have a Cricut so I do prefer non Cricut videos. My sister actually has a Cricut and I've used it a little but it's not something I have access to on a regular basis. So I hope you continue to make videos not using Cricut. Like I said, I watch your Cricut videos regardless because I enjoy watching you. I do different kinds of crafting but when it comes to words, I usually use stickers or rub on transfers. I get stickers and rub on transfers from DT. The rub on transfers are great and rub on beautifully. But as you know, those supplies are sparse at DT. I also paint a lot of things and decoupage. I guess you could say I'm a back to basics kind of crafter. 😉 Don't get me wrong, I love technology, I just don't own any. 😋 And since the majority of people apparently voted for Cricut videos, that's what you'll probably do the most of. I absolutely loved the National Lampoon's vacation themed videos you've done and got the biggest kick out of them. 🤗 So if you could throw in occasional non Cricut videos, I would greatly appreciate it. 💕 Thanks for sharing another great video! 🥰
Thank you so much Vickie! I appreciate your support of my channel. Rest assured, I will continue to create both Cricut and non-Cricut videos for all my craft buddies :)
I subscribed to your TH-cam Channel and you are amazing. I wish I could afford to do stuff like this. I had to quit working toll due to lung issues and covid. But to all the DIY subscribers I’m subscribed too. You are all Blessed and soooooo Talented, Creative and Awesome DIYers!
Oh so helpful! I di get an explore air 2 for Christmas! I mean I used to ride Harleys, but this machine is intimidating...thank you so much...sweet girl! Hi Finn, so cute!
Do you need to prep to items with any type cleaning agent, if so, what type agent to use or what not to use that would interfere with the Critcut vinyl adhering or breakdown? The etching, of the glasses, is absolutely insane and beautiful. The “HELLO” sign was magnificent. I am so wanting a Cricut, funds all low. Trying to save to get one. Disabled. Would love to try and may some extra income from crafting.
I don’t clean my surfaces for the most part but if you want to I’d use rubbing alcohol for glass and regular multi surface cleaners for pitcher. And ensure they are fully dry before application 😊
Great video, I love your explanations!! And all of the projects, although my favorites were the milk jug and the framed tile piece. I’ve really been looking to make some tile pieces so it was some good inspiration for wall art! I also just love your style so much so it’s always super exciting when I see you’ve posted a new video, especially ones focused on using the Cricut! It helps me keep my motivation up even when feeling frustrated with my Cricut 😊. I’m a fairly new user and my latest frustration has been finding out that dollar tree glitter vinyl, which works perfect for larger writing/pieces, and I love the blue color of, is pretty much unusable for smaller or more intricate designs (at least not without me making serious pressure adjustments). If you ever talk about etching cream or use it in future videos I do hope you’ll say a little more about why beginners (and clumsy people like me) should use gloves/eye protection! It’s so easy as crafters to be overconfident and ignore people’s recommendations/warnings even when they are really important like yours was! Not trying to criticize whatsoever, since you made it very clear it’s better to be safe than sorry, but it’s so tempting to think etching cream is pretty nontoxic like most other crafting supplies are today (and then get a nasty surprise). I was super shocked when I looked into it just because I’m a millennial who has only grown up with non toxic version of things but it’s just not been figured out yet for glass etching (or wood burning paste for that matter). So I’ve actually not bought any because I can barely trust myself around it, let alone my naughty cat who loves to jump up on the crafting table. I know I’m probably extra paranoid but after enough years working in a lab with dangerous chemicals and learning about chemical safety, I guess it’s just rubbed off into my everyday life 😂. I did end up caving and getting some spackle to use even though that can be pretty toxic, but it’s at least preventable with gloves and doing all sanding outdoors. Anyway, sorry this was so long, just wanted to share how much I enjoy your videos and wanted to explain my request about the etching cream safety info so that I didn’t sound like a random troll going after you or your video because I love your channel and all your videos!
I love your projects but I wish while you were in design space you would SLOW DOWN. Beginners and people trying for the first time to do those large signs can't follow through that slicing stuff when you go so fast
Hey there Whit... I just got my Cricut Maker and had only done the flower that it shows how to do when you first get set up. Then I found this video and slowly went through the process of setting up the WiFi sign... im so excited to say that I created my first project because of YOU!! I have not tried to cut it out yet but at least I'm learning how to use the software. Thank you for making these teaching videos!
Angie - THANK YOU for sharing this. This made my heart SO HAPPY! This is why I love creating and sharing so others can do it too. I'm so happy to hear that you enjoyed it!
Omg I love ur hack!!! A blow dryer I love it I can’t tell you how much I hate working with the smart vinyl. I have thrown away so many failed attempts. You have saved me money and my time ty !!!!
I love this, I have the Cricut Maker and just enjoy making things. I also live in northern IL and the winters are brutal except for today it was so nice. Enjoy your videos so much.
Love your projects. I'm new to cricut and have a question about the easy press. I have the medium size and was wondering if I make a pillow with HTV but the image or words are bigger than the heat press can I press in sections?
I made the tile! I used the back of one of these 4 compartment wooden trays/boxes from Dollar Tree (like you did in a previous video), then stained it and added white vinyl. l love it so much! Thanks for the inspiration and the file!
Thank you Whitney! I need all the help I can get with the cricut, I can do some things on it. I have the maker just got it for Christmas. But im have a major problem getting my files transferred from etsy or anywhere, I no to go to the down loads, where you make the design but after that I cant find anything or if I do it says it doesn't fit in what they are doing or something to that affect. But I love what you did today, I had never thought about adding to pitchers and cans and things like that, and everyone is always asking what our password is. So now I can make a sign for that. You need to put that out!! Hahaha. There s a sign for that! Or there's a stincle for that! Just a thought. God bless and have a great week
Hi Kim, can you change where your downloads are saved to so you can find them? Once you do head to uploads and you can import the files you have to use in Design Space :)
Like this video? Be sure to watch my new DT Cricut video for 2023: th-cam.com/video/MTLGBsivUhw/w-d-xo.html
🌸 Want to learn more Cricut tips? Join me for the 2023 Cricut Craftfest Feb 6th-10th for FREE! Get your ticket here: bit.ly/3XzJsQx
⭐ DOWNLOAD my free cut files used in this video here: bit.ly/3sKF43k
POPULAR: The Best Dollar Tree Cricut Blanks: th-cam.com/video/g1ABt8yB9iw/w-d-xo.html
Check out my full Cricut Playlist: th-cam.com/play/PLN5vNkJRfhkMW-be9DGNCsP2MMkxl2Aw-.html
📧Sign up for my emails here: bit.ly/WWInsiders
❓Need help downloading, watch this: th-cam.com/video/TQI_YRlfw40/w-d-xo.html
💲Purchase a commercial license for my free files here: bit.ly/3BYbyum
My Amazon favorites for home and DIY: www.amazon.com/shop/whiskeywhit
Whit, HELP! I've never used a cutting machine, I purchased a manual dye machine and a ton of dyes, I tried it and hated it! Then around seven mns ago I purchased the Cricut Maker 3 maybe it's too much of a machine for a bigginer? It took me like four-five mns to take it out of the box! I'm a visual learner so I've watched tons of Cricut videos, I tried the couple beginner projects they went well... I was really good at making flyers, signs, websites so the Cricut design center I've found easy to use, the one problem I'm having I figuring out size and thickness of the font. I made my first sign "Believe In The Magic" it was a 11x24 wood sign that I purchased on sale at Michael's, then I put the transfer tape on, removed the decal and went to put it on my sign and I could not get the decal off the transfer tape! I couldn't understand how you and other youtubers made it look so easy! I used the tools I purchased for the Cricut and took each letter off one at a time inch by inch, it was so difficult I just could not believe how hard it was! About two hours of slowly removing the decal and placing it on my sign I noticed the translucent water marking on the transfer tape and saw the words "Extra Strong Transfer Tape! I went and looked at the box and sure enough that's what it said! In all the Cricut videos I've watched (mainly decals for signs or hard flat smoth surfaces, I've never heard anyone mention different transfer tapes I just assumed they were all the same! I'm not even sure what you would use that extra strong transfer tape for! I could hardly get the decals off by hand! So that was my first project, the sign looks amazing for what I went through making it, although two or three letters did rip so I had to piece them together the best I could! Second project, what I'm currently working on it a huge built-in spice rack with three different sizes of spice jars, I did search the design space for an already completed project where I would just have to size it but was unable to find one that were word decals the only one's I could find were a sticker with the spice name written on to it and I just wanted the spice names... OK, sorry for the lengthy post, there are things I have learnt from you tips, because you talk about those things like in this video using the hair dryer I wonder if that would have helped me with that first project? Anyway, I cut and pasted most of my spice names from a list I had been collecting, I chose a font, tried to figure out how large/small to make it and then cut it, I then went to weed it and not understanding font size when I went to weed it I lost all the i's all the dots for the i's I lost parts of M's and N's etc. You get what I'm saying, the size of the font was way to thin and elongated, as I tried to weed it I realized it wasn't going to work as word decals but as word stencils! I then tried one spice jar and hated it... so, back to the drawing board, I changed the font to one that wasnt so delicate, adjusted the size, I will say that I was working on 4 lists of about 8 words, I could not figure out how to separate the individual words when I tried it split it up in columns so I only had a list of the first letter of each word! Omg! I'm sorry this is so long and I really hope you or someone else sees this and can advise me... I adjusted the size of the entire list to fit each word into a 2"×1.5" area, cut it and weeded it, was moving along OK, but I'm just not crazy about the size of the words I think they are too big and in some cases only one word instead of two fit (Greek Spice to just Greek) my OCD has now kicked in and I can't look at all my spices names shortened! Like Everything Bagel Spice to EVRYTHNG.... Nope I can't do it! So, after that long story! In short, can you suggest or recommend anything? What am I doing wrong? Should I only work with one word at a time? Sizing them all individually? Will that mean that every name will be a different size? How do I do names like DILL then 5-CHINESE SPICE OR GARLIC AND RED PEPPER ? Do I do them all one size the smallest that will fit two lines of words for the longer names? What about the different size bottles I've used the smallest bottle that is round except for the area to put a word which is 2"×1.5" the second size is exactly the same jar but bigger its flat area it 3"×2.5" then the third bottle is tall and square it's 2.5"×6" tall... can the names be a different size for each bottle or will that look weird? I'll use the same font for all of them but I just wonder if each bottle should have its own size that fits the same way on each bottle? Also, can you remove permanent vinyl off of glass? I already made six bottles but I just don't like that they are not the full names! Any help I can get would be amazing!
When you etch do you use removable vinyl or permanent?
@@laceyfontenot186 I've never tried etching yet...
@Jenna Bella Expectation Vs Reality I just read your comment to Whit.. the only time that you may need the extra strong transfer tape is for glitter vinyl and from what I was told the Cricut brand extra strong is sometimes still to strong. As for as signs, if you painted(or stained) them yourself, stick the transfer tape on something else first to get some of stickiness off. That way it won't pull the paint off. I hope I helped you some 😊
@@laceyfontenot186 thank you!
I love how you craft things that you will actually use in your home and not just video random things that'll probably get thrown in a closet afterwards. Your authenticity and love for what you do is admirable!
Oh gosh thank you! ❤️ That is something I say all the time when I'm concepting videos so I really appreciate that it shines through. Have an AWESOME day, friend!
I love that “0h hello” sign!
Love the huge sign! But all were cute!
Thank you, thank you for the tip with the transfer tape!
Love love love that you answered a question you didn’t even know I was thinking🤣wow mouthful.
I love the slice to get rid of things or move things. I love the way you pick and space fonts.
Love the porch sign! Any chance you can point me in the direction of a video that shows how you use the slice function for the stencil to break it down to printable pieces?
Yes! Here you go: th-cam.com/video/80f9_UlUN4Q/w-d-xo.html
That will jump you right to a project where I break it down.
I can't wait to make my outdoor sign..
So happy to have found your channel. You are a fabulous teacher. Thanks for the energetic presentation
You are so welcome! So glad you enjoyed it!
I'm really enjoying your channel. You give me a lot of inspiration. Thank you for taking the time to do these videos.
Love the tip for weeding with the Smart transfer tape. That has been driving me nuts!
Glad it was helpful!
Thank you Whitney for explaining how to use a cricut. I hope to get one soon and will refer back to your videos for tutorials. You do a wonderful job teaching others. And I love all of these projects. ♥️👍
You are so welcome! Thank you!
Thanks for posting how to make the porch sign. I am getting ready to make one the same size as yours with both sides stenciled for St. Patrick’s Day/Easter. I now know to what to use to seal it.
Glad it was helpful!
I got a Cricut Joy for Christmas. So much I have to learn. You make it look easy. Right trying to learn nest vinyls to use, paper etc. Definitely see I need to get my laptop fixed.
You are seriously amazing! Your tips were SO helpful to me! TY and more how to's for Cricut ❣️❣️
TFS so cute…..OMG can’t wait to try the hairdryer tip. Smart vinyl frustrates me 💜
I have been wanting to do a porch sign but was not sure how to do it. I have the bigger mat also, so now this is going to be my next project. I’m glad you show how to decor our homes with your projects it is stuff that I would definitely put in my house. I bought a new house and farm house is my Devore so you have so many ideas. Love love your videos…. Thank you.
Brenda, that's wonderful! Congrats on your new house, we're moving into a new home later this summer, so I'll have plenty more projects coming up. - THANK YOU for sharing this. I'm so happy to hear that you enjoyed it!
Great ideas. Thanks so much!
Great video! Thank you.
Thank you for sharing your ideas, I'm new to the Cricut fam watching your video and how easy you make it look im not so worried any more I know I'm going to have tons of fun I'm going to continue to follow you and I know I'm going to learn so much more from you, thanks a bunch and Happy Crafting 😁
Yes! The more you make, the more comfortable you'll get!
Great ideas I love your wifi and oh hello so silly
Hey im new to cricut and your videos. Ty
As usual you do not disappoint! Loved these, and as I was watching, searched Hobby Lobby for the milk can and pitcher!🤣
That's awesome! As an FYI I like most (if not all) of my supplies in the description for easy searching 🥰
All your projects are very well done. The oh hello is my favorite. Thanks Whitney
I just found you and LOVE your videos
Yay welcome!
I really love watching you design your Cricut projects. Your ideas are terrific and so professional! Sadly, I have a Silhouette instead of a Cricut. I can do pretty much the same things you do but the terms are different from Cricut. I'm gonna be a Debbie Downer: I've never been very crazy about Cricut's vinyl products, including their transfer tape. I especially like your porch sign!!
Thank you! The great news is there are a ton of places to get vinyl and transfer tape :)
Good evening Whitney and thank you for sharing your beautiful ideas
Omg Whitney, you are a pro at using your Cricut and making all those beautiful projects. I have only done two projects on my machine, I am terrified of the Cricut design space, there are so many things you have to do in there. Thank you for taking your time and showing us how to make this projects, it helps so much. I truly enjoy your channel. Thank you!!!
HI Felicia! I understand it can be intimidating, but you got this. Practice and time will totally help! Here's a full video on design space that should help: th-cam.com/video/7ouOLYTC2YM/w-d-xo.html
These are terrific DIYS. Love the porch sign TYFS
I love your channel. Thank you for sharing all of your tips and tricks for Cricut. I have seen people using armor etch and then they add something to the top of it to color the etched areas. Do you know anything about this process? If so, can you do a tutorial of it? ❤️❤️
I've seen people use Rub & Buff, but I haven't ever done it myself. I might have to try it!
Absolutely love how you did both the Wifi sign as well as the beer can glasses. Thank you so much for sharing! I've already hit subscribe and look forward to more videos!
Awesome! Thank you!
New to Cricut..can't wait to try these projects! Love them all!
Loved the big sign! The glasses are a great idea for a Christmas gift this year!
Love all the projects! Thank you for sharing all of these wonderful tips and tricks!
Your explanation and crafts are always on point! I have had my silhouette for years now, and there’s so many things that I still don’t know how to do. 😂For Christmas two years ago, my husband brought me a Cricut Joy, and I like using it for my smallest projects, but your instructional videos make me want to cross over completely to the Cricut family 🤣. 👍🏽👍🏽
I haven't used a Silhouette but you know I love my Cricut :)
I got the Cricut maker 3 the day they came out in June for an early birthday present. For Christmas I received some of the blades such as the embosser and the knife. Would love some tips and tricks on how to use these. I have “tried” to watch other videos from other creators but confused me so much that I haven’t even gotten the blades out of the packaging. Love love love how you explain and show us instead of reading from a book or index cards.
HI Vanessa! I have a video with felt coming up so that will be fun to share. I'll also do something with wood and the knife blade. I recently used it with chipboard for my son's birthday in this video - it will show you the functionality and how to use it: th-cam.com/video/m0RMLOM2hbs/w-d-xo.html
This link will jump you right to that specific project :)
Thank you so much for making this video! I make porch signs alot and you just taught me some great tricks! Thank you for all your inspiration!
Yeah, we are doing the big C
Thank you for the very creative video Whitney😊 I always have trouble with the measurements not being accurate…I’m going to use your idea (using the squares/circles as my base)from now on…thank you, thank you 🙏 ❤️😊
Yay - so happy it helped!
Thanks so much. Great projects. I am the same height as you or was in high school a LONG time ago. LOL
Tall girls unite!
Hey Whitney !! Great video - thanks for all the details - such a huge help! One question, how do you get the vinyl to stick to stain? I have the hardest time with that - any tricks up your sleeve?
Hi Brenda - I'm thinking your transfer tape is too sticky. You need something with a lower tack so it releases your vinyl. You also want to peel it back at an angle and take your time. You may have to push some of it back as you peel it so it doesn't peel up with the transfer tape. I hope that helps!
Hey Whitney……… so for etching you use removable vinyl? What type do you use for stenciling on wood? Thank you so much for all the great tips!
Hi Amy - I use permanent vinyl for etching so it really sticks. I also use that for stenciling typically. Here I used stencil vinyl. I hope that helps!
@@Whiskeyandwhit yes thank you!
I love all these Cricut DIYs! I'm watching your videos and as soon as I can get to it I'm going to make a few things with my Cricut! Theast DIY you did that huge porch sign you should put something on the other side for summer or fall. 🙂 Thanks so much for taking the time to teach how you do your DIYs!! 😀♥️
Yes! That is one huge sign! In fact, I picked up a damaged 1x10, 8 ft long at Home Depot in their discounted area, some time ago, so i am ready to make that sign! Cute saying, too.
Beautiful pieces. I have a question though. What is the difference with using stencil paper or using the vinyl paper and making it a stencil? Thank you in advance
Hi Kathy - the biggest difference is that the vinyl is sticker and thicker. But they are very similar.
For the class you put the vinyl on which is not dishwasher safe, can you cover it with the Dishwasher Safe Mod Podge?
Sorry glass not class
Hi Judy - you can, however I still worry about the high heat and pressure on the vinyl. I err on the side of caution and hand wash anything with vinyl on it.
I saw a video Where are you added vinyl to a spatula. Is the spatula for decor only or can you actually use the spatula?
I went to Hobby Lobby yesterday, I didn’t realize how huge those milk containers were. They are half my size. 😩😩😩😂😂😂
I love them all! I just learned how to make a big ass outdoor sign! And how to make a stencil
Can you useSmart Vinyl on a cricut air 2?
Hey Laura! Yes, you can, but you have to put it on a mat - so it defeats the purpose in my opinion.
Marvelous video! You seem so at ease and comfortable using your Cricut! I have an Explore Air 2, and do pretty good getting what I want. I have difficulty getting my transfer tape off. Thanks for the tips you shared! Please keep doing more of these.
Omg I love all your stuff and have learned so many things about using my Cricut from you 😊
I made a sign for my neice who is newly engaged using your Greatst Love Story svg and she loved it. Thank you!!!
That is awesome!
Also Whit,I wouid like to see a little more content with the cricut on the slicing, and how you are adding a shape to make projects,I just can't get that stuff for some reason,I think my brain just is like..... SQUIRREL 🐿️🤣😅 and then I become frustrated and STOP. Thanks so much again,for just being amazing
I have the Cricut explore air 2,
Hi Candy! Here's another video with a deeper dive into slice: th-cam.com/video/80f9_UlUN4Q/w-d-xo.html
I love the tall sign! I just bought the porch one from Hobby Lobby 🤦🏻♀️. I should have made this instead. Love all the tips. Thanks so much!
Oh no! Now you know :)
You do such an amazing job on the Cricut videos. I have learned a lot from watching your videos. Not to mention how cute your diys turned out! Awesome job friend! 🥰🤗
Thank you so much friend! ❤️
I LOVE that huge sign! We're moving later this summer too. To Florida. Gotta make a sign for our new home too!
Good luck with your move!
Yeah 👏🏼 this is what I voted for!!!! 🎉
Hint...you can use contour and click the parts of an image you don't want instead of slicing 🙂
True! I just like slice so that I don’t have to click multiple times :) you can totally use contour I just like this method better 😊
I just got a cricut air explorer 2
Me too!!!! Enjoy yours!!
@@AmyHarrison125 definitely! Got some crafting to do!
Thanks for another great cricut video Whitney. I've recently upgraded to the explore air 2 from the joy, and I'm loving all the extra things I can do. But I'm still very much a beginner. Always learn something new from your cricut videos x
I love you projects you do!
I’ve saved a bunch of them while I look for the supplies to do them. My problems a lot of time is once I’ve gotten the supplies I can never figure out which person’s specific video it is I wanna do!
I love how you show the finished projects at the beginning of this video! Thank you so much for sharing!
I’m going to have to do a shorter sign. I’m only 5’2”. 😂😂😂 I definitely liked the milk jug you did for your friend. I found it on Hobby Lobby website. I’m going to see if they have it in the store. I’m going to make it for my house.
Thank you for sharing. Loved the hacks. I hope you get warm soon as I am below Illinois. But I do love all seasons. I'm just ready for it to be warmer ☺️
I have found this cricut smart vinyl is the BEST out of every type I’ve ever used. The thicker back makes weeding and cutting a breeze!
What a great video!! I’m new to a Cricut and this will help tremendously!! TFS
Thanks Whitney. I needed this video. I put my Cricut away and I want to use it. LOL it should always be out.
Did you know you can dye your etching? Using rit dye and soaking the etched piece in a bowl with water and dye will dye the etching and wash off from the smooth surface. I seen a video on it but can't remember the creator.
Love the sign! Will be making one this weekend - with a little twist - I have a ton of free wood - while I have some long enough pieces - they are not wide enough. First step - stain everything. Second step cut cross pieces for the back to keep the 3 long pieces together to make the right width. I did one at Christmas attaching wood letters - but now I have my Cricut Joy I'm following your lead and stenciling! Thank you for the tutorial! Blessings!
That's awesome Candace! I'd love to see it when you're done - you can shoot me an email or tag me on IG :)
Oh Hello!! Whitney, You are the best educator when it comes to Cricut. I have been using mine for years and years, but I always seem to learn something new from you. Thank you for taking the time to give all the details to making these projects. I love them all, but my favorites are the porch sign and the wifi sign.
Aw thank you so much! I'm so happy to hear that ❤️
Hey Whit. Love your creativity & bless you for sharing. I'm also in Illinois so I can relate to the elements. #readyforspring!
Problems with Cricut transfer tape has been a problem for years because it stinks
The good news is there are a ton of brands that make transfer tape so you can find one that works well for you :)
This was an amazing video! I learned SO much and I'm so inspired to do some DIY'ing now!!!! Thank you so much for the cut files too! I def need that tile file!!!! Thank you, Whitney!
Glad it was helpful!
Thank you! I get so intimidated with the large cricut designs, your slicing method is exactly what I needed to learn. Love it.
You are so welcome! I'm so happy to hear that!
Your ideas are so practical. They'd all make great gifts. Thanks for sharing.
I just got a Cricut Joy and really appreciate learning new tricks and how to make things. Have you tried using the Dollar Tree permanent vinyl with your Cricut Joy? I'm having trouble figuring out what cut settings to use.
I haven't, but I would suggest the Washi Tape setting :)
All of your projects are super nice. I love the big sign. Maybe I’ll be brave and give it a try.
Such cute ideas. I think I can do the smaller projects on my Cricut Joy.
I loved this video, it was very helpful and I learned a lot. Thanks for sharing.
Love the Oh HELLO sign, definitely need to make that!!! Thanks so much for sharing your knowledge & creativity!!! Stay well, hugs!!!
Thank you so much! So glad you enjoyed it 🥰
I learned so much and excited about getting started. Thank you!
Thank you for this great tutorial. I'm going to do most of these for our home. So refreshing to get away from holiday diys.
Thank you - this was a fun one to do!
5”11 …wow that seems so tall to this 5”1 person! Lol
😂😂
Thank you. Not sure which project I want to attempt first.
Whitney, Thank you SO MUCH for the hack on releasing the smart vinyl...I was getting very frustrated and fairly new to my JOY machine. So now, with your hack ...it will be much more enjoyable to work on projects! ❤❤❤
You are so welcome!
Great projects Whitney! ❣️ I always enjoy your videos!
I don't think I actually voted when you asked about the type of videos we prefer. And I realize you create a lot of Cricut videos and I watch a majority of them. However, I don't actually have a Cricut so I do prefer non Cricut videos.
My sister actually has a Cricut and I've used it a little but it's not something I have access to on a regular basis.
So I hope you continue to make videos not using Cricut. Like I said, I watch your Cricut videos regardless because I enjoy watching you.
I do different kinds of crafting but when it comes to words, I usually use stickers or rub on transfers. I get stickers and rub on transfers from DT. The rub on transfers are great and rub on beautifully. But as you know, those supplies are sparse at DT.
I also paint a lot of things and decoupage. I guess you could say I'm a back to basics kind of crafter. 😉
Don't get me wrong, I love technology, I just don't own any. 😋
And since the majority of people apparently voted for Cricut videos, that's what you'll probably do the most of.
I absolutely loved the National Lampoon's vacation themed videos you've done and got the biggest kick out of them. 🤗
So if you could throw in occasional non Cricut videos, I would greatly appreciate it. 💕
Thanks for sharing another great video! 🥰
Thank you so much Vickie! I appreciate your support of my channel. Rest assured, I will continue to create both Cricut and non-Cricut videos for all my craft buddies :)
I subscribed to your TH-cam Channel and you are amazing. I wish I could afford to do stuff like this. I had to quit working toll due to lung issues and covid. But to all the DIY subscribers I’m subscribed too. You are all Blessed and soooooo Talented, Creative and Awesome DIYers!
Thank you so much - so sorry to hear about your health issues. 💔
Oh so helpful! I di get an explore air 2 for Christmas! I mean I used to ride Harleys, but this machine is intimidating...thank you so much...sweet girl! Hi Finn, so cute!
🤣🤣🤣
Do you need to prep to items with any type cleaning agent, if so, what type agent to use or what not to use that would interfere with the Critcut vinyl adhering or breakdown? The etching, of the glasses, is absolutely insane and beautiful.
The “HELLO” sign was magnificent.
I am so wanting a Cricut, funds all low. Trying to save to get one. Disabled. Would love to try and may some extra income from crafting.
I don’t clean my surfaces for the most part but if you want to I’d use rubbing alcohol for glass and regular multi surface cleaners for pitcher. And ensure they are fully dry before application 😊
Great video, I love your explanations!! And all of the projects, although my favorites were the milk jug and the framed tile piece. I’ve really been looking to make some tile pieces so it was some good inspiration for wall art! I also just love your style so much so it’s always super exciting when I see you’ve posted a new video, especially ones focused on using the Cricut! It helps me keep my motivation up even when feeling frustrated with my Cricut 😊. I’m a fairly new user and my latest frustration has been finding out that dollar tree glitter vinyl, which works perfect for larger writing/pieces, and I love the blue color of, is pretty much unusable for smaller or more intricate designs (at least not without me making serious pressure adjustments).
If you ever talk about etching cream or use it in future videos I do hope you’ll say a little more about why beginners (and clumsy people like me) should use gloves/eye protection! It’s so easy as crafters to be overconfident and ignore people’s recommendations/warnings even when they are really important like yours was! Not trying to criticize whatsoever, since you made it very clear it’s better to be safe than sorry, but it’s so tempting to think etching cream is pretty nontoxic like most other crafting supplies are today (and then get a nasty surprise).
I was super shocked when I looked into it just because I’m a millennial who has only grown up with non toxic version of things but it’s just not been figured out yet for glass etching (or wood burning paste for that matter). So I’ve actually not bought any because I can barely trust myself around it, let alone my naughty cat who loves to jump up on the crafting table. I know I’m probably extra paranoid but after enough years working in a lab with dangerous chemicals and learning about chemical safety, I guess it’s just rubbed off into my everyday life 😂. I did end up caving and getting some spackle to use even though that can be pretty toxic, but it’s at least preventable with gloves and doing all sanding outdoors.
Anyway, sorry this was so long, just wanted to share how much I enjoy your videos and wanted to explain my request about the etching cream safety info so that I didn’t sound like a random troll going after you or your video because I love your channel and all your videos!
Thanks for the tip! I'll be sure to share more information on etching next time - you are so right :)
I love your projects but I wish while you were in design space you would SLOW DOWN. Beginners and people trying for the first time to do those large signs can't follow through that slicing stuff when you go so fast
Thanks for the tips!
Hey there Whit... I just got my Cricut Maker and had only done the flower that it shows how to do when you first get set up. Then I found this video and slowly went through the process of setting up the WiFi sign... im so excited to say that I created my first project because of YOU!! I have not tried to cut it out yet but at least I'm learning how to use the software. Thank you for making these teaching videos!
Angie - THANK YOU for sharing this. This made my heart SO HAPPY! This is why I love creating and sharing so others can do it too. I'm so happy to hear that you enjoyed it!
Thank you for the Cricut tips and how-to-do's. I'm still learning about my Cricut and these were very helpful.
Glad it was helpful!
Great instructions and awesome design work! Love it.
Omg I love ur hack!!! A blow dryer I love it I can’t tell you how much I hate working with the smart vinyl. I have thrown away so many failed attempts. You have saved me money and my time ty !!!!
Yay! I’m so happy to hear that!!
I love this, I have the Cricut Maker and just enjoy making things. I also live in northern IL and the winters are brutal except for today it was so nice. Enjoy your videos so much.
Thank you! I'm not looking forward to the snow coming today :/
Love your projects. I'm new to cricut and have a question about the easy press. I have the medium size and was wondering if I make a pillow with HTV but the image or words are bigger than the heat press can I press in sections?
Hi there! yes, you can absolutely press in sections :)
I made the tile! I used the back of one of these 4 compartment wooden trays/boxes from Dollar Tree (like you did in a previous video), then stained it and added white vinyl. l love it so much! Thanks for the inspiration and the file!
That is awesome! Thanks for sharing!
Love love love! Thank you so much for sharing!!!
Thank you Whitney! I need all the help I can get with the cricut, I can do some things on it. I have the maker just got it for Christmas. But im have a major problem getting my files transferred from etsy or anywhere, I no to go to the down loads, where you make the design but after that I cant find anything or if I do it says it doesn't fit in what they are doing or something to that affect.
But I love what you did today, I had never thought about adding to pitchers and cans and things like that, and everyone is always asking what our password is. So now I can make a sign for that. You need to put that out!! Hahaha. There s a sign for that! Or there's a stincle for that! Just a thought. God bless and have a great week
Hi Kim, can you change where your downloads are saved to so you can find them? Once you do head to uploads and you can import the files you have to use in Design Space :)